Correlation of modified crack tip opening distance with heat input to the heat affected zone of high-strength low-alloy steels

Investigated is the dependency of the crack tip opening displacement (CTOD) on the local microstructure of the heat affected zone in high-strength low-alloy (HSLA) microalloyed steel. Since the initiation of the crack tip location could not be controlled in fatigue, any possible correlation between heat iput in welding and fracture toughness could be smeared. Modified CTOD data are defined; they show that the fracture resistance of the weld joint decreased as the heat input increased.     

C-N Bond Formation by Consecutive Continuous-Flow Reductions towards A Medicinally Relevant Piperazine Derivative

A new, continuous-flow consecutive reduction method was developed for the C-N bond formation in the synthesis of the key intermediate of the antipsychotic drug cariprazine. The two-step procedure consists of a DIBAL-H mediated selective ester reduction conducted in a novel, miniature alternating diameter reactor, followed by reductive amination using catalytic hydrogenation on 5% Pt/C. The connection of the optimized modules was accomplished using an at-line extraction to prevent precipitation of the aluminum salt byproducts.     

Thermography Applied to the Study of Fatigue Crack Propagation in Polycarbonate

Thermography was used to study the propagation of fatigue cracks during cyclic loading of pre-cracked SAE keyhole polycarbonate specimens. A micro-bolometer infrared camera (FLIR A655sc) and a commercially available software program (DeltaTherm2) were employed. The stress intensity factors were determined using a hybrid thermoelastic stress analysis (TSA) technique. The crack growth rate was determined via thermography using two different approaches. The first approach used the output of the crack-tip position from the developed TSA algorithm and the number of cycles between data sets. The second approach used temperature measurement as a new way to determine da/dN (crack growth rate) directly. As a result, da/dN vs ΔK (stress intensity factor range) graphs were plotted and fitted using Paris’ law. A comparison between the resultant da/dN vs ΔK curves and results found in the literature, as well as curves from the finite element method (FEM) simulations showed good agreement. The conclusion was that thermography is a very powerful tool that can detect, measure and monitor fatigue cracks in polycarbonate.     

Determination of <Superscript>93</Superscript>Zr in nuclear power plant wastes

A radioanalytical method (based on separation using UTEVA columns and ICP-MS measurement) has been used for determination of ⁹³Zr in 37 nuclear power plant samples. As ⁹³Nb might affect the detection of ⁹³Zr, Monte Carlo activation model was used to calculate the expected ⁹³Zr/^natZr mass ratio, which was compared to measured ones. It was found, that a decontamination factor of 10³ is sufficient to get a measurement uncertainty of less than 10%.     

Synthesis of vinca alkaloids and related compounds part 94. Epimerization of compounds with aspidospermane and D‐secoaspidospermane skeleton

The individual epimerization steps of vincadifformine ( 1 ), deethylvincadifformine isomers ( 2,3 ), their synthetic intermediates ( 4–13 ) as well as that of simpler compounds with D‐secoaspidospermane skeleton ( 15–17 ) were studied a ) in protic medium (boiling deuteroacetic acidic) and b ) under reductive (with sodium borodeuteride in boiling acetic acid, or with sodium borohydride in boiling deuteroacetic acid) conditions.     

Determination of <Superscript>93</Superscript>Zr and <Superscript>237</Superscript>Np in nuclear power plant wastes

A combined radioanalytical method for determination of ⁹³Zr and ²³⁷Np (as well as other actinoids) in radioactive wastes has been developed. Analytes were co-precipitated on iron(II)-hydroxide, separated and purified on UTEVA columns, and detected by inductively coupled plasma mass spectrometry. According to Zr and Np, 65 and 75% yields were achieved, respectively.     

On the equality of quasi-arithmetic and Lagrangian means

The paper deals with the equality problem of quasi-arithmetic and Lagrangian means which is to determine all pairs of continuous strictly monotone functions φ,ψ:I→R such that, for all x,y∈I,