How One can Repair Non-integrable Kahan Discretizations. II. A Planar System with Invariant Curves of Degree 6

Mathematical Physics, Analysis and Geometry - In this paper, we develop the dressing method to study the modified Camassa-Holm equation with the help of reciprocal transformation and the associated...     

One-sided invertibility of discrete operators with bounded coefficients

Aequationes mathematicae - For $$p\in (1,\infty )$$ , we establish several criteria of one-sided invertibility on spaces $$l^p=l^p(\mathbb {Z})$$ for discrete band-dominated operators being either...     

Highly Proton-Conductive Zinc Metal-Organic Framework Based On Nickel(II) Porphyrinylphosphonate

The design of new solid-state proton-conducting materials is a great challenge for chemistry and materials science. Herein, a new anionic porphyrinylphosphonate-based MOF ( IPCE-1Ni ), which involves dimethylammonium (DMA) cations for charge compensation, is reported. As a result of its unique structure, IPCE-1Ni exhibits one of the highest value of the proton conductivity among reported proton-conducting MOF materials based on porphyrins (1.55×10⁻³ S cm⁻¹ at 75 °C and 80 % relative humidity).     

Ozonolysis of a Series of Methylated Alkenes: Reaction Rate Coefficients and Gas‐Phase Products

The gas‐phase ozonolysis of three methylated alkenes, i.e., trans‐2,2‐dimethyl‐3‐hexene (22dM3H), trans‐2,5‐dimethyl‐3‐hexene (25dM3H), and 4‐methyl‐1‐pentene (4M1P), has been investigated in the presence of sufficient hydroxyl radical scavenger in a laminar flow reactor at ambient temperature (296 ± 2 K) and P = 1 atm of dry air (RH ≤ 5%). Ozone levels in the reactor were monitored by an automatic analyzer. Alkene and gas‐phase product concentrations were determined via online sampling either on three‐bed adsorbent cartridges followed by thermodesorption and GC/FID‐MS analysis or on 2,4‐dinitrophenylhydrazine (DNPH) cartridges for subsequent HPLC/UV analysis. Reaction rate coefficients of (3.38 ± 0.12) × 10^?17 for 22dM3H and (2.71 ± 0.26) × 10^?17 for 25dM3H, both in cm³ molecule^?1 s^?1 units, have been obtained under pseudo–first‐order conditions. Primary carbonyl products have been identified for the three investigated alkenes, and branching ratios are reported. In the case of 4M1P ozonolysis, the yield of a Criegee intermediate was indirectly determined. Kinetics and product study results are compared to those of literature when available. This work represents the first investigation of reaction products in the ozonolysis of 22dM3H, 25dM3H, and 4M1P in a flow reactor.     

Influence of the Degree of Deacetylation of Chitosan and BMP-2 Concentration on Biocompatibility and Osteogenic Properties of BMP-2/PLA Granule-Loaded Chitosan/β-Glycerophosphate Hydrogels

Compositions based on chitosan/β-glycerophosphate hydrogels with highly porous polylactide granules can be used to obtain moldable bone graft materials that have osteoinductive and osteoconductive properties. To eliminate the influence of such characteristics as chain length, degree of purification, and molecular weight on a designed material, the one-stock chitosan sample was reacetylated to degrees of deacetylation (DD%) of 19.5, 39, 49, 55, and 56. A study of the chitosan/β-glycerophosphate hydrogel with chitosan of a reduced DD% showed that a low degree of deacetylation increased the MSCs (multipotent stromal cells) viability rate in vitro and reduced the leukocyte infiltration in subcutaneous implantation to Wistar rats in vivo. The addition of 12 wt% polylactide granules resulted in optimal composite mechanical and moldable properties, and increased the modulus of elasticity of the hydrogel-based material by approximately 100 times. Excessive filling of the material with PLA (polylactide) granules (more than 20%) led to material destruction at a ~10% strain. Osteoinductive and osteoconductive properties of the chitosan hydrogel-based material with reacetylated chitosan (39 DD%) and highly porous polylactide granules impregnated with BMP-2 (bone morphogenetic protein-2) have been demonstrated in models of orthotopic and ectopic bone formation. When implanted into a critical-size calvarial defect in rats, the optimal concentration of BMP-2 was 10 μg/mL: bone tissue areas filled the entire material’s thickness. Implantation of the material with 50 μg/mL BMP-2 was accompanied with excessive growth of bone tissue and material displacement beyond the defect. Significant osteoinductive and osteoconductive properties of the material with 10 μg/mL of BMP-2 were also shown in subcutaneous implantation.     

Rank one perturbations at infinite coupling in Pontryagin spaces

In this paper we relate the operators in the operator representations of a generalized Nevanlinna function N(z) and of the function −N(z)⁻¹ under the assumption that z=∞ is the only (generalized) pole of nonpositive type. The results are applied to the Q-function for S and H and the Q-function for S and H^∞, where H is a self-adjoint operator in a Pontryagin space with a cyclic element w, H^∞ is the self-adjoint relation obtained from H and w via a rank one perturbation at infinite coupling, and S is the symmetric operator given by S=H∩H^∞.     

Self-bonding in an amorphous polymer below the glass transition: A T-peel test investigation

Films of amorphous polystyrene (PS) with a weight-average molecular weight (M_w) of 225 × 10³ g/mol were bonded in a T-peel test geometry, and the fracture energy (G) of a PS/PS interface was measured at the ambient temperature as a function of the healing time (t_h) and healing temperature (T_h). G was found to develop with (t_h)^1/2 at T_h = T_g-bulk − 33 °C (where T_g-bulk is the glass-transition temperature of the bulk sample), and log G was found to develop with 1/T_h at T_g-bulk − 43 °C ≤ T_h ≤ T_g-bulk − 23 °C. The smallest measured value of G = 1.4 J/m² was at least one order of magnitude larger than the work of adhesion required to reversibly separate the PS surfaces. These three observations indicated that the development of G at the PS/PS interface in the temperature range investigated (<T_g-bulk) was controlled by the diffusion of chain segments feasible above the glass-transition temperature of the interfacial layer, in agreement with our previous findings for fracture stress development at several polymer/polymer interfaces well below T_g-bulk. Close values of G = 8–9 J/m² were measured for the symmetric interfaces of polydisperse PS [M_w = 225 × 10³, weight-average molecular weight/number-average molecular weight (M_w/M_n) = 3] and monodisperse PS (M_w = 200 × 10³, M_w/M_n = 1.04) after healing at T_h = T_g-bulk − 33 °C for 24 h. This implies that the self-bonding of high-molecular-weight PS at such relatively low temperatures is not governed by polydispersity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1861–1867, 2004