How One can Repair Non-integrable Kahan Discretizations. II. A Planar System with Invariant Curves of Degree 6

Mathematical Physics, Analysis and Geometry - In this paper, we develop the dressing method to study the modified Camassa-Holm equation with the help of reciprocal transformation and the associated...     

One-sided invertibility of discrete operators with bounded coefficients

Aequationes mathematicae - For $$p\in (1,\infty )$$ , we establish several criteria of one-sided invertibility on spaces $$l^p=l^p(\mathbb {Z})$$ for discrete band-dominated operators being either...     

Design and investigation of UV image detectors

The results of investigation of optical image detectors designed for the largest problem, near-VUV, range of the spectrum are presented. The possibility of using a dual-stage image detection system to appreciably lower the sensitivity threshold and make computer data processing feasible is considered. The integration of a UV module into a wideband image detector is studied.     

Ozonolysis of a Series of Methylated Alkenes: Reaction Rate Coefficients and Gas‐Phase Products

The gas‐phase ozonolysis of three methylated alkenes, i.e., trans‐2,2‐dimethyl‐3‐hexene (22dM3H), trans‐2,5‐dimethyl‐3‐hexene (25dM3H), and 4‐methyl‐1‐pentene (4M1P), has been investigated in the presence of sufficient hydroxyl radical scavenger in a laminar flow reactor at ambient temperature (296 ± 2 K) and P = 1 atm of dry air (RH ≤ 5%). Ozone levels in the reactor were monitored by an automatic analyzer. Alkene and gas‐phase product concentrations were determined via online sampling either on three‐bed adsorbent cartridges followed by thermodesorption and GC/FID‐MS analysis or on 2,4‐dinitrophenylhydrazine (DNPH) cartridges for subsequent HPLC/UV analysis. Reaction rate coefficients of (3.38 ± 0.12) × 10^?17 for 22dM3H and (2.71 ± 0.26) × 10^?17 for 25dM3H, both in cm³ molecule^?1 s^?1 units, have been obtained under pseudo–first‐order conditions. Primary carbonyl products have been identified for the three investigated alkenes, and branching ratios are reported. In the case of 4M1P ozonolysis, the yield of a Criegee intermediate was indirectly determined. Kinetics and product study results are compared to those of literature when available. This work represents the first investigation of reaction products in the ozonolysis of 22dM3H, 25dM3H, and 4M1P in a flow reactor.     

Lasing in the far IR spectral range under femtosecond optical excitation of the InAs semiconductor in a magnetic field

Generation of a coherent electromagnetic radiation in the far IR (THz) spectral range upon excitation of a semiconductor InAs crystal by 70-fs Ti: sapphire laser pulses is studied. The effect of a magnetic field of different orientation on generation in the submillimeter-wavelength range is analyzed. Placing the crystal into the magnetic field of an optimized permanent magnet with a strength of 5 kOe aligned along the surface of the semiconductor increased the power of generated radiation by a factor of six compared with that in the absence of the field. For the average pump-laser output power of 150 mW and repetition rate of 80 MHz, the average power of the THz radiation reached 100 nW. For detection of ultrashort pulses of the THz radiation, we used, for the first time, a highly sensitive uncooled optoacoustic detector, which detected signals with a power lower than 1 nW.     

Rank one perturbations at infinite coupling in Pontryagin spaces

In this paper we relate the operators in the operator representations of a generalized Nevanlinna function N(z) and of the function −N(z)⁻¹ under the assumption that z=∞ is the only (generalized) pole of nonpositive type. The results are applied to the Q-function for S and H and the Q-function for S and H^∞, where H is a self-adjoint operator in a Pontryagin space with a cyclic element w, H^∞ is the self-adjoint relation obtained from H and w via a rank one perturbation at infinite coupling, and S is the symmetric operator given by S=H∩H^∞.     

Self-bonding in an amorphous polymer below the glass transition: A T-peel test investigation

Films of amorphous polystyrene (PS) with a weight-average molecular weight (M_w) of 225 × 10³ g/mol were bonded in a T-peel test geometry, and the fracture energy (G) of a PS/PS interface was measured at the ambient temperature as a function of the healing time (t_h) and healing temperature (T_h). G was found to develop with (t_h)^1/2 at T_h = T_g-bulk − 33 °C (where T_g-bulk is the glass-transition temperature of the bulk sample), and log G was found to develop with 1/T_h at T_g-bulk − 43 °C ≤ T_h ≤ T_g-bulk − 23 °C. The smallest measured value of G = 1.4 J/m² was at least one order of magnitude larger than the work of adhesion required to reversibly separate the PS surfaces. These three observations indicated that the development of G at the PS/PS interface in the temperature range investigated (<T_g-bulk) was controlled by the diffusion of chain segments feasible above the glass-transition temperature of the interfacial layer, in agreement with our previous findings for fracture stress development at several polymer/polymer interfaces well below T_g-bulk. Close values of G = 8–9 J/m² were measured for the symmetric interfaces of polydisperse PS [M_w = 225 × 10³, weight-average molecular weight/number-average molecular weight (M_w/M_n) = 3] and monodisperse PS (M_w = 200 × 10³, M_w/M_n = 1.04) after healing at T_h = T_g-bulk − 33 °C for 24 h. This implies that the self-bonding of high-molecular-weight PS at such relatively low temperatures is not governed by polydispersity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1861–1867, 2004