Preserving the chromatographic integrity of high-speed supercritical fluid chromatography separations using time-of-flight mass spectrometry

The advantage of high-speed time-of-flight-mass spectrometry (TOF-MS) detection for ultrafast qualitative supercritical fluid chromatography/mass spectrometry (SFC/MS) applications allows the superior resolving power of SFC to be exploited in high-throughput analysis. A chromatographic comparison of quadrupole MS and TOF-MS shows high-speed TOF total ion current data point sampling to be more indicative of fast SFC separations and corresponding short (1-2 s) baseline peak widths. Results shown for analysis of a six-compound mixture with two peaks eluting at 0.86 and 0.89 min exhibit >50% resolution by high-speed TOF data sampling, whereas the same peaks appear to coelute using quadrupole MS data sampling. Additionally, a marked improvement in the peak baseline widths is afforded by fast TOF data acquisition of 0.1 s/spectrum, resulting in a reduction in the baseline width, 1.6 s, of sulfanilamide in a four-compound mixture that is more than 2-fold greater than that achieved at the slower data acquisition of 0.5 s/spectrum. The resulting increase in resolution and improved peak shapes allow automatic integration routines to perform more effectively. For most classes of compounds amenable to high performance liquid chromatography, including druglike species, steroids, and polymers, the union of SFC with TOF-MS provides the maximum density of chemical information per unit time available with any high-speed chromatographic/mass spectrometric method.     

Fourier transform ion cyclotron resonance mass spectrometry using atmospheric pressure photoionization for high-resolution analyses of corticosteroids

Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) was coupled with atmospheric pressure photoionization (APPI) for the first time and used for the analysis of several corticosteroids.1 The analytes showed excellent response using APPI when compared with both electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI). APPI has the advantage of requiring less heat for desolvation, resulting in less thermal degradation of the analytes and higher signal-to-noise than APCI. In terms of ultimate sensitivity, APPI is more efficient than either ESI or APCI for the analysis of corticosteroids. With some compounds, the high-resolution capability of FTICRMS was necessary to obtain an accurate mass due to contributions of the M(+.) (13)C isotope in the [M+H](+) ion peak.     

Multiresidue method for the fast determination of pesticides in nutraceutical products (Camellia sinensis) by GC coupled to triple quadrupole MS

A method based on QuEChERS (quick, easy, cheap, effective, rugged, and safe) has been developed and validated for the determination and quantification of more than 140 pesticides in nutraceutical products obtained from green tea (Camellia sinensis). Extraction was performed with acidified acetonitrile (acetic acid 1%, v/v) and a clean‐up step using primary secondary amine (50 mg), graphitized black carbon (100 mg) and magnesium sulfate (200 mg) was needed. Pesticide determination was achieved utilizing GC coupled to triple quadrupole MS/MS using the selective‐reaction monitoring mode. The total run time was 23 min. Pesticides were quantified using matrix‐matched calibration. Recoveries ranged from 70 to 120% and relative SD was lower than 25% at 10, 50, and 100 μg/kg. LOQs were lower than 10 μg/kg. 148 pesticides were validated. The validated method was applied to commercial nutraceutical products, detecting 4,4‐dichlorobenzophenone (28 μg/kg), o,p′‐dicofol (38 μg/kg) and p,p‐dicofol (44 μg/kg) in a few samples.     

Coordination chemistry of 1,3,5-triaza-7-phosphaadamantane (PTA) and derivatives. Part II. The quest for tailored ligands,complexes and related applications

This review paper covers the recent developments (2004–2009) on the tailored synthetic modifications and related coordination chemistry of the water-soluble cage-like aminophosphine ligand 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1]decane (PTA), together with the new applications in the fields of catalysis, material science and medicinal chemistry.     

Tuning of optical resonances in asymmetric microtube cavities

We tune optical resonances in rolled-up SiO/SiO(2) microtube cavities by gradually modifying the tube structure through asymmetrical postdeposition of SiO(2). Spectral blueshifts followed by redshifts of the resonant modes are observed in a thin-walled microtube (tube-I), which is attributed to a competition between shape deformation and effective increase of tube wall thickness. In contrast, only a monotonic redshift is detected when asymmetrical deposition is performed on a thick-walled microtube (tube-II). Distinct wavelength-dependent tuning was revealed in both kinds of tubes. Numerical calculations based on perturbation theory are carried out to explain and confirm the experimental results.     

Mutual Diffusion Driven NMR: a new approach for the analysis of mixtures by spatially resolved NMR spectroscopy

We introduce a new approach for resolving the NMR spectra of mixtures that relies on the mutual diffusion of dissolved species when a concentration gradient is established within the NMR tube. This is achieved by cooling down a biphasic mixture of triethylamine and deuterated water below its mixing temperature, where a single phase is expected. Until equilibrium is reached, a gradient of concentration, from ‘pure’ triethylamine to ‘pure’ water, establishes within the tube. The amount of time required to reach this equilibrium is controlled by the mutual diffusion coefficient of both species. Moreover, a gradient of concentration exists for each additional compound dissolved in this system, related to the partition coefficient for that compound in the original biphasic state. Using slice selective experiments, it was possible to measure these concentration gradients and use them to separate signals from all the present species. We show the results acquired for a mixture composed of n‐octanol, methanol, acetonitrile and benzene and compare them with those obtained by pulse field gradient NMR. Copyright © 2016 John Wiley & Sons, Ltd.     

Determination of Pesticide Residues in Fruit and Vegetables by High-Performance Liquid Chromatography–Tandem Mass Spectrometry with Multivariate Response Surface Methodology

Multivariate response surface methodology optimization using Placket–Burman and Box–Behnken designs were respectively used for the screening and optimization of significant factors for liquid chromatography–tandem mass spectrometry. Consequently, the optimized instrument successfully improved the sample preparation protocol and the method was validated. However, modified QuEChERS dispersive solid phase extraction coupled with ionic liquid-based dispersive liquid–liquid microextraction were used for the determination of multi-pesticide residues in fruit and vegetable samples. The analysed samples were jackfruit, strawberries, cucumber, pears, and carrots. The resulting linearity range (5–400?µg/kg) and regression coefficient (>0.99) results were satisfactory. The 94.2 and 95.8% accuracy (89–138%) and precision (0–25%) results were satisfactory and within the recommended ranges (≤20%) and (70–120%), respectively. The limits of detection (0.01–0.54?µg/kg) and quantitation (0.03–1.79?µg/kg) were excellent. The matrix effects (≤?87%) for all analysed samples were not significant. The estimated measurement uncertainties (≤27%) were within the acceptable range (≤50%). Justifiably, the response surface methodology optimized instrument and sample treatment techniques were reliable and convenient for multi-pesticide residue determination in various fruits and vegetables.     

Multi-pesticide Residues Determination in Samples of Fruits and Vegetables Using Chemometrics Approach to QuEChERS-dSPE Coupled with Ionic Liquid-Based DLLME and LC–MS/MS

Pesticides play vital roles in agricultural practices, but the nature and mishandling of the chemicals have led to their accumulation in moist soil, vegetables and fruits. Thus, development of efficient methods for pesticides determination is one of the most important ways to address such challenges. Multivariate response surface methodology optimisation using Placket–Burman and Box–Behnken designs were respectively used for screening and optimisation of significant factors of quick, easy, cheap, effective, rugged and safe (QuEChERS) with dispersive solid-phase extraction (SPE). Consequently, the optimised QuEChERS-dSPE technique coupled with modified ionic liquid-based (IL-based) dispersive liquid–liquid microextraction was used for sample preparation before LC–MS/MS. The developed method was validated (SANTE 11831-2017) for multi-pesticide residues determination in samples of bananas, cabbages, tomatoes, oranges and onions. The precision results were satisfactory in terms of relative standard deviation (≤?20%) as recommended. The results of accuracy for relative recoveries (82–137%) were satisfactory because 92.5% of results were within the recommended range (70–120%). The matrix effects in all the samples were very weak (less effective) (≤???80%). The linearity of the evaluated results was 5–400 µg kg^?1 and regression coefficients (R²) were?>?0.99. The resulting limits of detection and quantitation were 0.02–0.32 and 0.07–1.06 µg kg^?1, respectively, and therefore satisfactory. Certifiably, the estimated measurement uncertainties range (1–16%) was acceptable (≤?50%). Thus, the developed method could be reliable and suitable for routine determination of multiple pesticide residues in various vegetable and fruit samples.     

Multiresidue method for the analysis of more than 140 pesticide residues in fruits and vegetables by gas chromatography coupled to triple quadrupole mass spectrometry

A new multiresidue method has been developed and validated for the determination of more than 140 pesticide residues in cucumber and orange by gas chromatography coupled to triple quadrupole mass spectrometry (GC-QqQ-MS/MS) in a single run of 25.50 min. The triple quadrupole (QqQ) analyzer simultaneously operated in the selected reaction monitoring (SRM) and selected ion monitoring (SIM) modes, acquiring two or three transitions per compound. Samples were extracted by the application of a single-phase extraction of 10 g of sample with acetonitrile containing 1% of acetic acid, followed by a liquid-liquid partition formed by the addition of 4 g of MgSO(4) and 1 g of NaOAc. A dispersive solid-phase extraction (D-SPE) with primary secondary amine (PSA) was applied to clean up the extracts. A final concentration step was included in order to increase sensitivity in the instrumental analysis. The method was properly validated in each matrix in a wide dynamic range (10-400 microg kg(-1)): this work relies on a new quantification strategy by the use of two calibration curves to increase the dynamic range, which permitted reduction of sample dilutions and increase in sample throughput. Recovery was studied at three concentration levels (11.5, 50.0, and 150.0 microg kg(-1)), yielding values in the range 70-110% with precision values, expressed as relative standard deviation (RSD), lower than 20 and 25% for the intraday and interday precision, respectively. Limits of quantification (LOQs) were established at 10 microg kg(-1), the lowest maximum residue level (MRL) value set by the European Union in vegetables. The method was successfully applied to the analysis of pesticide residues in real samples from the southeastern Spain. Copyright (c) 2008 John Wiley & Sons, Ltd.