The synthesis and reaction of N-sulfenyl heterocycles: development of effective sulfenylating reagents

Various N-sulfenyl heterocycles were synthesized by transamination of sulfenamides using a chlorine gas-free method. The N-sulfenyl heterocycles behaved as sulfenylating reagents of anilines; N-sulfenylbenzimidazoles were the most effective.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Local dynamic mechanical properties in model free-standing polymer thin films

High-frequency sinusoidal oscillations of a coarse-grained polymer model are used to calculate the local dynamic mechanical properties (DMPs) of free-standing polymer thin films. The storage modulus G(') and loss modulus G(") are examined as a function of position normal to the free surfaces. It is found that mechanically soft layers arise near the free surfaces of glassy thin films, and that their thickness becomes comparable to the entire film thickness as the temperature approaches the glass transition T(g). As a result, the overall stiffness of glassy thin films decreases with film thickness. It is also shown that two regions coexist in thin films just at the bulk T(g); a melt-like region (G(')G(")) in the middle of the film. Our findings on the existence of a heterogeneous distribution of DMPs in free-standing polymer thin films provide insights into recent experimental measurements of the mechanical properties of glassy polymer thin films.     

Collection of mercury from artificial sea-water with activated carbon

Nanogram amounts of mercury(II) and methylmercury in artificial sea-water containing mineral acids as preserving reagents were shown to be collected quantitatively with activated carbon. Mercury concentrated on activated carbon was determined directly by combustion, trapping on gold and electrothermal atomic-absorption spectrophotometry. The activated carbon was purified by heating at 350 degrees for 2 hr. Sulphuric acid and hydrochloric acid were purified by treatment with activated carbon. Interference from iodide was eliminated by using a carbonate buffer wash before the atomic-absorption measurement. Less than 4 ng of mercury in 200-300 ml of artificial sea-water, whether acidified or not (with sulphuric, hydrochloric or nitric acid), was satisfactorily collected with 100 mg of activated carbon. Mercury was also collected quantitatively after oxidative treatment of artificial sea-water.     

Two-dimensional self-organization of phthalocyanine and porphyrin: dependence on the crystallographic orientation of Au

By immersing Au substrate into a benzene solution containing both cobalt(II) phthalocyanine (CoPc) and copper(II) tetraphenyl-21H,23H-porphine (CuTPP), a two-dimensional alternate bimolecular structure was formed on the reconstructed Au(100)-(hex) surface.     

Solvent free synthesis of polyaniline-clay nanocomposites from mechanochemically intercalated anilinium fluoride

Nanocomposites consisting of conducting polyaniline and clay minerals were successfully synthesized from mechanochemically intercalated anilinium fluoride; the nanocomposites prepared by the mechanochemical intercalation method contained much more polyaniline in the clay layers than those prepared by a conventional solution method.     

Dependence of molecular recognition of fullerene derivative on the adlayer structure of zinc octaethylporphyrin formed on Au(100) surface

Adlayers of ZnOEP were prepared on reconstructed Au(100)-(hex) and unreconstructed Au(100)-(1 x 1) surfaces by immersing into a benzene solution containing ZnOEP molecules, and the adlayer structures were characterized by scanning tunneling microscopy (STM). A hexagonally arranged ZnOEP array was formed on an Au(100)-(hex) surface, whereas a rectangularly arranged ZnOEP array was found on an Au(100)-(1 x 1) surface. The adlayer structure of ZnOEP was dependent upon the underlying Au atomic arrangements. Furthermore, an investigation of the spuramolecular assembly for these modified surfaces was carried out by using an open-cage C(60) derivative (opened C(60)). A supramolecular assembled adlayer with a 1:1 composition of opened C(60)/ZnOEP was formed on Au(100)-(hex), whereas aggregates of opened C(60) were found on the ZnOEP-modified Au(100)-(1 x 1) surface. Electrochemical responses of opened C(60) were significantly influenced by underlying ZnOEP arrays. This finding suggests that precise control of underlying ZnOEP adlayers with the Au atomic structure is important to recognize the opened C(60) on them.     

Photopolymerization of cyclohexene oxide by use of o-nitrobenzyl triphenylsilyl ether/aluminum compound catalyst. Dependence of catalyst activity on the structure of the silyl ether

o-Nitrobenzyl triphenylsilyl ehther/aluminum compound has been previously shown by the authors to act as catalyst in the photopolymerization of epoxides. The dependence of the structure of the silyl ether on the catalyst activity was examined. There were two steps in the photopolymerization. The first step (“Step 1”) is photodecomposition of the silyl ether to silanol. The second step (“Step 2”) is the initiation of polymerization by silanol and the aluminum compound. The introduction of an electron withdrawing group, Cl, CF₃, on the benzene ring bonded to Si made the quantum yield of Step 1 low, however, the rate of Step 2 was increased. The low quantum yield of Step 1 was explained in terms of the rate of electron transfer that is controlled by the relative electron density between the CH₂ and NO₂ in the o-nitrobenzyl group. The acceleration of Step 2 was explained in terms of an increase in silanol acidity that was promoted by the introduction of an electron withdrawing group. The overall rate of the photopolymerizatiol depends to a greater degree on the rate of Step 2 than on that of Step 1.     

7,10,14-Tri-t-butyl-3-amino-1,8-bisdehydro[14]annulene

Tri-t-butylcarboxybisdehydro[14]annulene was converted by the Curtius reaction into unstable aminoannulene, which could be characterized as N-acetyl derivative. The pK_a-value of the aminoannulene reflects aromatic nature of the annulene nucleus.