A note on the critical points of equilibrium paths in imperfect structures

In a recent work (Int. J. Solids Struct. 37 (2000) 1561) by one of the authors, an extended system for calculating critical points of equilibrium paths in imperfect structures was presented. However, the extremum nature of these points was not analyzed explicitly in that paper. In this note, we will fill in the gap and establish a sufficient condition for determining the buckling strength of imperfect structures.     

1-烃基-1-硅杂环丁烷的合成及其Si—H键伸缩振动频率与结构关系的研究

硅杂环丁烷在有机硅化学中是一类非常重要的小分子环系化合物。由于硅杂环丁烷和环丁烷的环张力相似,因而显示出较高的反应活性。例如能与某些试剂作用,生成开环产物;在光解或热解条件下,产生具有Si=C结构的高活性中间体,可用以合成多种有机硅化合物。     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.     

Simultaneous hydrogen and peroxide production by photocatalytic water splitting

Photocatalytic oxidation of water is a promising method to realize large-scale H₂O₂ production without a hazardous and energy-intensive process. In this study, we introduce a Pt/TiO₂(anatase) photocatalyst to construct a simple and environmentally friendly system to achieve simultaneous H₂ and H₂O₂ production. Both H₂ and H₂O₂ are high-value chemicals, and their separation is automatic. Even without the assistance of a sacrificial agent, the system can reach an efficiency of 7410 and 5096 μmol g^–1 h^–1 (first 1 h) for H₂ and H₂O₂, respectively, which is much higher than that of a commercial Pt/TiO₂(anatase) system that has a similar morphology. This exceptional activity is attributed to the more favorable two-electron oxidation of water to H₂O₂, compared with the four-electron oxidation of water to O₂.     

Indium-mediated one-pot reductive conversion of nitroarenes to N-arylacetamides

N-Arylacetamides were prepared in excellent yields from nitroarenes in the presence of acetic anhydride, acetic acid and indium by a one-pot procedure.     

XPS定量分析及其在CdTe（Ⅲ）面识别化学物种中的应用

我们用谱仪能量传输函数修正的相对原子灵敏度因子获得了ＸＰＳ定量数据。通过将定量结果与结合能的化学位移相结合的方法，分析了ＣｄＴｅ表面的两个氧化过程，结果表明，机械抛光样品表面的构成是：６６％ＣｄＴｅ，２８．９％的Ｃｄ（ＯＨ）２和５．１％ＴｅＯｘ（Ｘ＞２），而经化学抛光的表面构成是∶８４．４％的ＴｄＴｅＯ４和１５．６％ＴｅＯｘ（Ｘ＞１）。     

大钟拍声的调整实验

阐明大钟拍声的发生原理,并用大钟振动拍的理论模型说明拍的特性,从而控制清晰度。在实验钟上附着质量,根据附着质量位置的不同,能够改变其非对称程度,进一步调整拍频,同时用有限元分析的结果和等效圆环理论计算的结果对比。引入等效圆环理论,通过建立一个理论上带有附加质量的轴对称圆环模型,达到具有和大钟相同的振动特性。根据模型,得到在大钟特定位置附加的质量,以同时调整所需拍的清晰度和周期。在大钟多个位置进行实验,并进行有限元分析,验证了该理论的有效性。     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Asymmetric Synthesis. VII. Double Stereodifferentiation in Allylation of Ketimines Bearing Two Chiral Auxiliaries. Application to Enantioselective Synthesis of α-Allylglycine

A double asymmetric induction has been observed in allylation of the imines derived from (+)-camphor, (+)- and (-)- 2-hydroxypinan-3-ones with (+)- and (-)-menthyl glycinates. After hydrolysis of the allylated intermediates, (R)- and (S)-α-allylglycines are obtained in 3–90% optical yields.