Thermoelastoplastic deformation of a thick-walled cylinder with a radial crack

The thermoelastoplastic fracture mechanics problem of a thick-walled cylinder subjected to internal pressure and a nonuniform temperature field is solved by the method of elastic solutions combined with the finite-element method. The correctness of the solution is provided by using the Barenblatt crack model, in which the stress and strain fields are regular. The elastoplastic problem of a cracked cylinder subjected to internal pressure and a nonuniform temperature field are solved. The calculation results are compared with available data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 3, pp. 173–183, May–June, 2008.     

Graphitized carbon black in quartz tubes for the sampling of indoor air nicotine and analysis by microwave thermal desorption-capillary gas chromatography

Nicotine in a smoky indoor air environment can be determined using graphitized carbon black as a solid sorbent in quartz tubes. The temperature stability, high purity, and heat absorption characteristics of the sorbent, as well as the permeability of the quartz tubes to microwaves, enable the thermal desorption by means of microwaves after active sampling. Permeation and dynamic dilution procedures for the generation of nicotine in the vapor phase at low and high concentrations are used to evaluate the performances of the sampler. Tube preparation is described and the microwave desorption temperature is measured. Breakthrough volume is determined to allow sampling at 0.1-1 L/min for definite periods of time. The procedure is tested for the determination of gas and paticulate phase nicotine in sidestream smoke produced in an experimental chamber.     

Determination of geosmin and 2-methylisoborneol in water using solid-phase microextraction and gas chromatography-chemical ionisation/electron impact ionisation-ion-trap mass spectrometry

A method for the determination of geosmin and 2-methylisoborneol (MIB) in water by solid-phase microextraction (SPME) is presented. Various SPME fibre chemistries have been compared for their efficiency in extracting MIB from water. Extraction conditions including the extraction time and temperature have been optimised. A 30 ml water sample is extracted for 20 min at 60 degrees C using a divinylbenzene fibre, and the extract analysed by gas chromatography with ion-trap mass spectrometry detection. d5-Geosmin and d3-MIB are added as internal standards to compensate for any variability in the SPME process which is not carried out to equilibrium. Chemical ionisation, using acetonitrile as the reagent gas, was found to give superior sensitivity to electron impact ionisation (EI) for the detection of MIB. EI was used as the ionisation mode for detection of geosmin. The method shows good linearity over the concentration range 5-40 ng l-1 and gives detection limits of 1 ng l-1 for both geosmin and MIB. Recovery (93-110%) and precision (3-12%) over this concentration range, for both raw and treated drinking waters, are comparable to currently employed methods such as closed-loop stripping analysis (CLSA). The method offers the advantage of being simple to use, with much shorter analysis times in comparison to CLSA.     

Dissolution of ionisable groups and lignocellulosic components during low-temperature kraft pulping of pinus radiata

A wide range of kraft pulps from radiata pine produced by low-temperature kraft pulping in flow-through reactors was assessed for carboxyl and hexenuronic acid (HexA) contents using the conductometric titrations and UV spectrophotometer, respectively. The Kappa number of pulps varied from 20.8 to 84.7 when using a cooking liquor of 1 M effective alkali as Na₂O, 25% sulfidity, and cooking time of 100–250 min. The experimental results showed that the carboxyl groups (including HexA) and HexA groups dissolved and their residual values in the pulp samples correlate linearly with Kappa number and pulp yield. The dissolving rate of all carboxyl groups is much faster than the loss of HexA. The HexA/lignin ratio decreased non-linearly with Kappa number.     

The insertion of the dioxides of carbon and sulphur into the palladium-carbon bond

Bis ( η¹, η²-allyl) palladium phosphine complexes react with carbon dioxide and sulphur dioxide by insertion into the palladium-carbon σ-bond to give η³-allylpalladium-carboxylate and -S-sulphinate complexes.     

Thermodynamics of the decomposition processes of donor-acceptor complexes MX3 x en x MX3 and MX3 x en.

The structural and thermodynamic properties of the donor-acceptor (DA) complexes of Group 13 metal halides (MX3) with ethylenediamine and their decomposition products have been studied theoretically at the B3LYP/LANL2DZ(d,p) level of theory. Gas-phase dissociation into various components and HX elimination reactions are considered. Both processes are endothermic but favored by entropy. Complexes of 2:1 composition are predicted to be stable in the gas phase up to 640-1000 K. It is found that complexation with the second acceptor molecule lowers the HX elimination enthalpy; in turn, HX elimination increases DA bonding with a second MX3 molecule. Exceptionally high values of the dissociation enthalpies (310-390 kJ mol(-1)) and HX elimination reactions (360-420 kJ mol(-1)) of the amido compounds MX2NHC2H4NH2 and MX2NHC2H4NHMX2 make them important intermediates in the decomposition processes. Dissociation reactions of the complexes are more favorable than HX elimination reactions; however, the subsequent oligomerization and cyclization processes of coordinationally unsaturated amido and imido compounds may facilitate HX elimination. Since HI elimination reactions are predicted to be the least endothermic, and aluminum-containing compounds have the strongest M-N dissociation enthalpies, it is expected that compounds based on aluminum iodide are promising objects for experimental studies.     

Photocrosslinking of functionalized rubber. II. Photoinitiated cationic polymerization of epoxidized liquid natural rubber

Low molecular weight epoxidized natural rubber has been crosslinked within seconds by UV irradiation in the presence of a triarylsulfonium salt. The photoinitiated cationic ring-opening polymerization was studied quantitatively by infrared spectroscopy and shown to proceed with surprisingly long kinetic chains in such solid medium. The high conversion (60%) needed for complete insolubilization, together with the presence of tetrahydrofuran structures, argue in favor of an intramolecular polymerization process involving neighboring epoxy groups. The photoinitiator concentration has a strong influence on the rate and extent of the reaction, as well as on the depth of cure profile. Because of an efficient dark process, close to 100% conversion was reached upon storage of the irradiated elastomer at ambient, with a concomitant increase of the gel fraction and the polymer hardness. The grafting of pendent acrylate groups onto the polymer chain leads to a three-fold decrease of the initial rate of polymerization of the epoxide. The photocuring of natural rubber bearing both epoxy and acrylate groups generates a dual polymer network which combines the properties of the two moieties. © 1995 John Wiley & Sons, Inc.     

Low frequency limits of third-order harmonic coefficients for atomic hydrogen in any level of discrete energy spectrum

In this paper the analytical expression is derived for the third-order optical harmonic coefficients x _abcd ^v (,,) of the atomic hydrogen at very low frequencies 0 in many level of the discrete energy spectrum.The author expresses his thank to Prof. Nguyen Van Hieu for suggesting the problem and fruitful discussions.     

Slow salt-induced aggregation of citrate-covered silver particles in aqueous solutions of cellulose derivatives

In this work, the salt-induced aggregation of bare and polymer-covered silver particles has been studied with the aid of light scattering and UV-visible spectroscopy. Light scattering on a suspension of bare silver particles at a low salt concentration shows that the cluster fractal dimension d _f changes from 1.6 to 2 in the course of the aggregation process, whereas no restructuring of the clusters is observed at a higher salinity where d _f ≈ 1.6. The growth of the clusters over time can be described by a power law R _h ∝ t ^α , where R _h is the apparent hydrodynamic radius. The UV-visible experiments revealed that increasing the size of the bare silver particles lead to a significant broadening and red-shift of the absorbance band, whereas for salt-induced growth of Ag clusters, a blue-shift and broadening was observed. Addition of salt to a suspension of silver particles and hydroxyethylcellulose divulged a slower broadening of the surface plasmon peak than without polymer.     

Deoxygenative α-alkylation and α-arylation of 1,2-dicarbonyls

Construction of C–C bonds at the α-carbon is a challenging but synthetically indispensable approach to α-branched carbonyl motifs that are widely represented among drugs, natural products, and synthetic intermediates. Here, we describe a simple approach to generation of boron enolates in the absence of strong bases that allows for introduction of both α-alkyl and α-aryl groups in a reaction of readily accessible 1,2-dicarbonyls and organoboranes. Obviation of unselective, strongly basic and nucleophilic reagents permits carrying out the reaction in the presence of electrophiles that intercept the intermediate boron enolates, resulting in two new α-C–C bonds in a tricomponent process.

α-Branched carboxylic acids and other carbonyls are readily accessed by a metal- and base-free deoxygenative α-alkylation and α-arylation of 1,2-dicarbonyls via boron enolates, resulting in a tricomponent coupling with unconventional electrophiles.