Characterization of Carbohydrates in Paper and Paper Pulps Using Anion Exchange Chromatography and Principal Component Analysis

In the course of this investigation, a method for the characterization and differentiation of paper pulps was developed. After hydrolyzation of the papers and the respective raw pulps with trifluoroacetic acid, the hydrolyzates were analyzed with respect to their carbohydrate composition using ion exchange chromatography. The variations in carbohydrate composition mainly arise from the various hemicelluloses of the papers and pulps. The chromatographic results were then further processed using principal component analysis which allows correlating the various papers to different pulp materials.     

Classification of the CD. Spectra of carotenoids

The CD. spectra of carotenoids in the 220-500 nm region may by inspection be classified as (a) essentially Conservative, (b) intermediate, or (c) essentially nonconservative. A conservative spectrum shows in that spectral region a sequence of 5-6 relatively sharp Cotton effects of alternating sign, the rotatory strengths of which roughly add to zero. In a non-conservative spectrum Δ? has the same sign over the whole region and its absolute value is in general somewhat smaller. In general, typical conservative spectra invert upon isomerization of the molecule from all-trans to mono-cis. Non-conservative spectra do not invert. The model of a chiral polyene of the length of the conjugated carotene chromophore reproduces well the main features of the conservative spectra. The theoretical predictions and the experimental data are shown to conform to the C₂-rule [43] [44]. The particular nature of the longest-wavelength transition is interpreted. Based on a summary of the chiroptic data on about 50 naturally occurring compounds, the question is discussed of when conservative spectra arise and when not.     

Routes to unique palladium A-frame complexes with a bridging fluoro-ligand

Treatment of a toluene solution of [PdMe(2)(Cy(2)PCH(2)PCy(2))](1) with pentafluoropyridine in the presence of traces of water affords the generation of the A-frame complexes [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][SiMeF(4)]() and [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][OC(5)NF(4)](2b). If the reaction is performed in an NMR tube equipped with a PFA inliner, complex 2b is produced, only. Treatment of 1 with pentafluoropyridine in the presence of an excess water yields the pyridyloxy complex [PdMe(OC(5)NF(4))(Cy(2)PCH(2)PCy(2))](3). Compound [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][FHF](2c) bearing a bifluoride anion instead of SiMeF(4)(-) or OC(5)NF(4)(-) can be generated by reaction of 1 with substoichiometric amounts of Et(3)N.3HF. The analogous complex [(PdMe)(2){mu-kappa(2)(P,P)Ph(2)PCH(2)PPh(2)}(2)(mu-F)][FHF] (5c) has been synthesized by addition of Ph(2)PCH(2)PPh(2) to a solution of [PdMe(2)(Me(2)NCH(2)CH(2)NMe(2))](4) in THF and subsequent treatment of the reaction mixture with Et(3)N.3HF. The structure of the A-frame complex 5c has been determined by X-ray crystallography.     

Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

Immobilization of the enzyme beta-lactamase on biotin-derivatized poly(L-lysine)-g-poly(ethylene glycol)-coated sensor chips: a study on oriented attachment and surface activity by enzyme kinetics and in situ optical sensing

Understanding the conformation, orientation, and specific activity of proteins bound to surfaces is crucial for the development and optimization of highly specific and sensitive biosensors. In this study, the very efficient enzyme beta-lactamase is used as a model protein. The wild-type form was genetically engineered by site-directed mutagenesis to introduce single cysteine residues on the surface of the enzyme. The cysteine thiol group is subsequently biotinylated with a dithiothreitol (DTT)-cleavable biotinylation reagent. beta-Lactamase is then immobilized site-specifically via the biotin group on neutral avidin-covered surfaces with the aim to control the orientation of the enzyme molecule at the surface and study its effect on enzymatic activity using Nitrocefin as the substrate. The DTT-cleavable spacer allows the release of the specifically bound enzyme from the surface. Immobilization of the enzyme is performed on a monolayer of the polycationic, biotinylated polymer PLL-g-PEG/PEG-biotin assembled on niobium oxide (Nb2O5) surfaces via neutral avidin as the docking site. Two different assembly protocols, the sequential adsorption of avidin and biotinylated beta-lactamase and the immobilization of preformed complexes of beta-lactamase and avidin, are compared in terms of immobilization efficiency. In situ optical waveguide lightmode spectroscopy and colorimetric analysis of enzymatic activity were used to distinguish between specific and unspecific enzyme adsorption, to sense quantitatively the amount of immobilized enzyme, and to determine Michaelis-Menten kinetics. All tested enzyme variants turned out to be active upon immobilization at the polymeric surface. However, the efficiency of immobilized enzymes relative to the soluble enzymes was reduced about sevenfold, mainly because of impaired substrate (Nitrocefin) diffusion or restricted accessibility of the active site. No significant effect of different enzyme orientations could be detected, probably because the enzymes were attached to the surface through long, flexible PEG chain linkers.     

Existence for evolutionary problems with linear growth by stability methods

We establish that solutions to the Cauchy–Dirichlet problem

${?}_{t}u?\mathrm{div}(D_{\xi }f(x,Du))=0$

for functionals $f:\mathrm{\Omega }\times {\mathbb{R}}^{N\times n}\to [0,\infty )$ of linear growth can be obtained as limits of solutions to flows with p-growth in the limit $p\downarrow 1$. The result can be interpreted on the one hand as a stability result. On the other hand it provides an existence result for general flows with linear growth.     

Comprehensive Characterization of Shredded Lithium-Ion Battery Recycling Material

Herein we report on an analytical study of dry-shredded lithium-ion battery (LIB) materials with unknown composition. Samples from an industrial recycling process were analyzed concerning the elemental composition and (organic) compound speciation. Deep understanding of the base material for LIB recycling was obtained by identification and analysis of transition metal stoichiometry, current collector metals, base electrolyte and electrolyte additive residues, aging marker molecules and polymer binder fingerprints. For reversed engineering purposes, the main electrode and electrolyte chemistries were traced back to pristine materials. Furthermore, possible lifetime application and accompanied aging was evaluated based on target analysis on characteristic molecules described in literature. With this, the reported analytics provided precious information for value estimation of the undefined spent batteries and enabled tailored recycling process deliberations. The comprehensive feedstock characterization shown in this work paves the way for targeted process control in LIB recycling processes.