Structural, electrical and optical properties of ZnS films deposited by close-spaced evaporation

ZnS films have been deposited on glass substrates by close-spaced evaporation (CSE) technique. The films were grown at different temperatures in the range, 200-350 °C. The layers have been characterized with X-ray diffractometer (XRD), atomic force microscope (AFM), energy dispersive analysis of X-rays (EDAX) and optical spectrophotometer to evaluate the quality of the layers for photovoltaic applications. The studies showed that the optimum substrate temperature for the growth of ZnS layers was 300 °C. The films grown at these temperatures exhibited cubic structure with nearly stoichiometric composition. The AFM data revealed that the films had nano-sized grains with a grain size of ∼40 nm. The optical studies exhibited direct allowed transition with an energy band gap of 3.61 eV. The other structural and optical parameters such as lattice stress, dislocation density, refractive index and extinction coefficient were also evaluated. The temperature-dependent conductivity measured in the range, 303-523 K showed a change in the conduction mechanism at 120 °C. The activation energy values evaluated using the temperature dependence of electrical conductivity are 7 and 29 meV at low and high temperature regions, respectively.     

Structural studies on ruthenium(II) complexes used in interphase catalysis for the hydrogenation of ketones

Structural studies were performed on catalytically active ruthenium(II) complexes used in interphases, by means of XAFS spectroscopy. The EXAFS investigations indicate that the complexes retain their structural integrity when they are embedded on polysiloxane matrices to form stationary phase materials. The AXAFS studies reveal that the variations in the catalytic activity of the complexes with different ligands can be correlated to the differences in the electronic structure around the active ruthenium center. The EXAFS investigations show that, in asymmetric transfer hydrogenation reactions catalysed by ruthenium(II) complexes, the co‐catalyst plays a crucial role not only in enhancing the catalytic activity, but also in determining the structure of the intermediate species. Copyright © 2007 John Wiley & Sons, Ltd.     

Utilization of CS2 as a source of C1 chemistry for the generation of methyldithioformate

Insertion of CS(2) into the Ru-H bond of cis-[(dppe)(2)Ru(H)(2)] takes place to afford the hydride dithioformate complex trans-[(dppe)(2)Ru(H)(SC(S)H)]. The hydride dithioformate complex reacts under very mild conditions with MeX (X = OTf, I) to give the hydride methyldithioformate derivative trans-[(dppe)(2)Ru(H)(SC(SMe)H)][X]. Three different pathways have been found to cleave off the ester moiety from the metal complex. A method to recover the ruthenium starting material upon elimination of the methyldithioformate is presented. This is a novel case of C(1) chemistry using carbon disulfide.     

Novel double insertion of carbon disulfide into two Ru-H bonds of [(dppm)(2)Ru(H)(2)] (dppm = Ph(2)PCH(2)PPh(2)): synthesis and crystal structure of a methanedithiolate complex

Addition of excess carbon disulfide to cis/trans-[(dppm)(2)Ru(H)(2)] results in the methanedithiolate complex [(dppm)(2)Ru(eta(2)-S(2)CH(2))] 4 via the intermediacy of cis-[(dppm)(2)Ru(H)(SC(S)H)] 2. The X-ray crystal structure of this species has been determined.     

New sphingolipids and a sterol from a lobophytum species of the Indian ocean

Chemical investigation of a soft coral species of the genus Lobophytum has resulted in the isolation of three new sphingolipids--(2S,3S,4R)-2-nonadecanoylamino-octadecane-1,3,4-triol (1), (2S,3R,4E,8E)-[(2'R)-2'-hydroxyheptadecanoylamino]-4,8-octadecadiene-1,3-diol (2), 1-O-(beta-D-glucopyranosyl)-(2S,3R,4E,8E)-2-[(2'R)-2'-hydroxynonadecanoylamino]-9-methyl-4,8-octadecadiene-1,3-diol (3) and a sterol--(24S)-ergost-5-en-3beta,7beta-diol (4) along with the known sphingolipid--(2S,3R,4E,8E)-2-hexadecanoylamino-4,8-octadecadien-1,3-diol (5) which showed cytotoxicity against human peripheral blood mononuclear cells (PBMC).     

Fullerenols revisited as stable radical anions

The first exhaustive purification and characterization of the much-studied "fullerenols", prepared by reaction of C(60) in toluene with an oxygenated, aqueous NaOH solution using tetrabutylammonium hydroxide as a phase transfer catalyst, has been performed. The resulting fullerenol is not simply polyhydroxylated C(60) but rather is a structurally and electronically complex C(60) radical anion with a molecular formula of Na(+)(n)[C(60)O(x)(OH)(y)](n)(-) (where n = 2-3, x = 7-9, and y = 12-15) for three different, but identical, preparations. Surprisingly, Na(+)-fullerenol is paramagnetic, exhibiting mu(B) values in aqueous solution of 1.9-2.1 B.M. at 0.5 T and 300 K and R(1) proton relaxivities of 0.55-0.77 mM(-1)s(-1) at 20 MHz and 40 degrees C, values both slightly higher than those expected for a pure S = 1/2 spin system. ESR studies (ESE-FS and 2D nutation) of frozen aqueous solutions at 1.5 and 5.0 K establish that Na(+)-fullerenol is mainly S = 1/2 with a minor, but significant, component of S = 1. Thus, this is the first report to characterize these widely studied, water-soluble fullerenols as stable radical anions. The stability of the S = 1/2 Na(+)-fullerenol radical is likely due to a highly derivatized C(60) surface that protects a cyclopentadienyl radical center on the fullerene.     

Two new 5-deoxyflavones from Albizia odoratissima

Two new 5-deoxyflavones, 7,8-dimethoxy-3',4'-methylenedioxyflavone (1) and 7,2',4'-trimethoxyflavone (2) together with a known flavone, 7,4'-dimethoxy-3'-hydroxyflavone (3) were isolated from the rootbark of Albizia odoratissima. The structures of these new compounds were elucidated by electrospray ionization mass spectrometry (ESI-MS) and 1D and 2D-NMR spectral studies including (1)H-(1)H correlation spectroscopy (COSY), heteronuclear single quantum coherence (HSQC), heteronuclear multiple bond connectivity (HMBC) and nuclear Overhauser enhancement spectroscopy (NOESY).     

Synthesis of some new metal-containing polyurethanes

Some new metal-containing polyurethanes were synthesized from manganese and lead salts of mono(hydroxyethyl)phthalate by condensing them with hexamethylene diisocyanate and toluene diisocyanate in dimethylformamide as solvent. The polymers were characterized by viscometry, infrared spectroscopy and thermal analysis. The decomposition temperatures of these polymers were found to be significantly lower than those of metal-free polymers of similar structure. However, the rates of decomposition of metal-containing polyurethanes were lower than those of polyurethanes having no metal. Inherent viscosities in DMSO at 30° of these polyurethanes were low, ranging from 0.043 to 0.067.     

Sensitive and selective spectrophotometric method for the determination of trace amounts of osmium with 1,2,3-indanetrione monothiosemicarbazone

Summary Sensitive and Selective Spectrophotometric Method for the Determination of Trace Amounts of Osmium with 1,2,3-Indanetrione Monothiosemicarbazone A simple, sensitive and selective spectrophotometric method has been developed for the determination of osmium using 1,2,3-indane-trione monothiosemicarbazone (ITMT). The method is based on the colour reaction between ITMT and osmium(VIII) in hydrochloric acid (0.32–0.60 M) medium. The calibration graph for measurement at 440 nm is linear in the range 1.4–33.6g of osmium per 25ml, with a molar absorptivity of 6.43×10⁴l·mole^–1·cm^–1. The effect of interferences has been studied and the method applied to the determination of osmium in synthetic samples whose composition correspond to osmiridium or syserkite, with good results.