Current R & D activities at TRCRE in polymer processing by EB

The current status of the R & D activities is presented on electron beam processing of polymers being carried out at TRCRE. Topics included are sterilization of medical products, graft polymers for selective separation or absorbents and curing of liquid prepolymer-monomer systems.     

Synthesis and cation-binding properties of poly-and bis(thiacrown ether)s

Poly- and bis(thiacrown ether) derivatives in which some oxygen atoms of benzocrown ether moiety are replaced by sulfur atoms have been synthesized. Their cation-binding abilities were investigated by using the solvent extraction method. The poly- and bis(benzothiacrown ether)s showed great affinity for silver ion, being more excellent in the affinity than the corresponding monocyclic analogs. They, however, possess very poor cation-binding ability for alkali and alkaline-earth metal ions. The poly- and bis(thiacrown ether)s also bind mercuric ions effectively, whereas the corresponding monomeric analogs do not at all.     

Polymer-supported bases. IX. Synthesis and catalytic activity of polymer-bound 4-(1-pyrrolidino)pyridine moieties

Polystyrene-bound 4-(1-pyrrolidino)pyridine moieties were prepared by the reaction of chloromethylated polystyrene resins with pyrrolidinopyridine derivatives containing hydroxyl groups. The supported amines were effective catalysts for acylations of tert-alcohols or enols, acylrearrangements, and diester synthesis from epoxides and anhydrides. Some of the low ring-substituted (8–15%) catalysts exhibited high activity comparable to that of 4-(N,N-dimethylamino)pyridine, though the activity was a little lower than that of 4-(1-pyrrolidino)pyridine. The recovered catalysts can be re-used, except for acyl rearrangements, without significant decrease in activity.     

Efficient esterification of carboxylic acids and phosphonic acids with trialkyl orthoacetate in ionic liquid

An operationally simple, inexpensive, efficient, and environmentally friendly esterification of various carboxylic acids, phosphonic acids, and phosphinic acids with triethyl orthoacetate or trimethyl orthoacetate under neutral conditions in a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, was successfully carried out to provide the corresponding ethyl esters or methyl esters in high yields.     

Halogen derivatives of m-phenylene(carbeno)nitrene: a switch in ground-state multiplicity

m-Phenylene-coupled carbenonitrenes [(3-nitrenophenyl)methylene (2-H), (3-nitrenophenyl)fluoromethylene (2-F), (3-nitrenophenyl)chloromethylene (2-Cl), (3-nitrenophenyl)bromomethylene (2-Br)] have been investigated computationally (with B3LYP, MCSCF, CASPT2, ROMP2, and QCISD(T) methods) and experimentally (with IR, UV, and ESR spectroscopy). For each species, five electronic states were considered. At the highest level of theory explored, the parent compound (2-H) has a quintet ground state, but its halogen derivatives (2-X, X = F, Cl, and Br) have triplet ground states. A linear relationship between the Q[bond]T energy gap of 2-X and the T-S gap of the corresponding phenylcarbenes 8-X is found, which can be helpful in rationalizing and predicting ground-state multiplicities in m-phenylene-linked carbenonitrenes and similar species. Precursors for the photochemical generation of 2-X (X = H, F, Cl, and Br) were synthesized and photolyzed in matrixes (Ar, triacetin) at low temperatures. IR (Ar, 13 K) and ESR (triacetin, 77 K) data are compatible with the generation of triplet halocarbenonitrenes 2-X, (X = F, Cl, and Br). All four compounds upon further irradiation undergo isomerization to substituted cyclopropenes 5-X (X = H, F, Cl, and Br), as suggested by their IR spectra.     

Membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene–perfluorovinyl ether)

Some properties of the membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene-perfluorovinyl ether) copolymer (PFA) films have been investigated. The dimensional change caused by grafting and swelling behavior, water uptake, electrical conductivity, and mechanical properties of the grafted films were found to increase as the grafting proceeds. The influence of the preparation conditions (such as preirradiation dose, monomer concentration, grafting temperature, and film thickness) on those properties was studied. These properties were found to be dependent mainly on the degree of grafting regardless of grafting conditions, except at higher monomer concentration (>40 wt %). The electric conductivity and mechanical properties for the membranes obtained at higher AAc concentrations were lower than those obtained at lower ones. Analysis by x-ray microscopy of the grafted films revealed that the grafting begins at the part close to the film surface and proceeds into the central part with progressive diffusion of monomer to give finally homogeneous distribution of the electrolytes in the whole bulk of the polymer. The membranes show good electrochemical and mechanical properties which make them acceptable for practical use as cation-exchange membranes.     

Chemical conversion of various celluloses to glucose and its derivatives in supercritical water

The supercritical water biomass conversion system was designed and developed in our laboratory. The reaction vessel with cellulose sample was treated with this system at supercritical state of water for a designated period (3–105s) under the conditions of a tin bath temperature of 500°C and pressure of 35MPa. The recovered products of hydrolysates were then analyzed by high performance liquid chromatography. The obtained results indicated that a high amount of glucose and levoglucosan can be achieved from both celluloses I and II for 5–10s supercritical treatment, while that from starch for 3–5s treatment. Although this difference could be due to a difference in the molecular structure between cellulose and starch, a difference between celluloses I and II was not significant. Instead, an accessibility of the water towards cellulose molecules seemed to be significant for their chemical conversion. With the longer treatment, amounts of these compounds observed were decreased due to decomposition. Therefore, it may be concluded that, compared with acid hydrolysis or enzymatic saccharification, cellulose may be hydrolyzed to glucose and its derivatives more or less to the same degree as in corn starch under supercritical state. This finding suggests that the supercritical treatment can overcome the difficulties in hydrolyzing cellulose to glucose, found in the acid hydrolysis or enzymatic saccharification techniques.     

o-Phenylene halocarbenonitrenes and o-phenylene chlorocarbenocarbene: a combined experimental and computational approach

[reaction: see text] Computations find that o-phenylene(halo)carbenonitrenes 2-XN, X = F, Cl, Br, have quinoidal singlet biradical ground states such as the parent o-phenylenecarbenonitrene (2-HN). Compared to the parent 2-HN, halogen substitution stabilizes the A' states relative to the A' ones. Halogen substitution also affects the barrier and exothermicity of the ring-opening reaction (to form unsaturated nitriles 4-XN, X = F, Cl, Br), but it has a smaller effect on the ring-closing reaction (to form benzo(aza)cyclobutadiene 3-XN, X = F, Cl, Br). Attempts to generate and observe the o-phenylene(halo)carbenonitrenes 2-XN, X = F, Cl, Br, using matrix isolation spectroscopy under conditions similar to those of the successful observation of 2-HN failed. Instead, the observed photoproducts were a mixture of 3-XN and 4-XN. In each case, the major product of the mixture appears to be the thermodynamically more stable one. In the case of X = Br, the observed mixture contains an additional component that is postulated to be Z-6-BrN. o-Phenylenechlorocarbenocarbene is also computed to have a quinoidal singlet biradical ground state and relatively stabilized A' excited states. Attempts to generate the biscarbene under matrix isolation conditions led to the detection of benzochlorocyclobutadiene (3-ClC), small amounts of the ring-open product (dienediyne 4-ClC), and cycloalkyne 5-ClC. Computations suggest that the formation of 5-ClC implies the generation of Z-6-ClC, which is analogous to the formation of Z-6-BrN from 2-BrN.