Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Beryllium coordination chemistry

The coordination chemistry of beryllium with particular emphasis on chelates under physiological or near physiological conditions is surveyed. Hard donors such as oxygen are emphasized; equilibrium data and formation constants are reported as an indication of the strength of the complex.     

Behavior and surface energies of polybenzoxazines formed by polymerization with argon,oxygen, and hydrogen plasmas

Polybenzoxazine (PBZZ) thin films can be fabricated by the plasma‐polymerization technique with, as the energy source, plasmas of argon, oxygen, or hydrogen atoms and ions. When benzoxazine (BZZ) films are polymerized through the use of high‐energy argon atoms, electronegative oxygen atoms, or excited hydrogen atoms, the PBZZ films that form possess different properties and morphologies in their surfaces. High‐energy argon atoms provide a thermodynamic factor to initiate the ring‐opening polymerization of BZZ and result in the polymer surface having a grid‐like structure. The ring‐opening polymerization of the BZZ film that is initiated by cationic species such as oxygen atoms in plasma, is propagated around nodule structures to form the PBZZ. The excited hydrogen atom plasma initiates both polymerization and decomposition reactions simultaneously in the BZZ film and results in the formation of a porous structure on the PBZZ surface. We evaluated the surface energies of the PBZZ films polymerized by the action of these three plasmas by measuring the contact angles of diiodomethane and water droplets. The surface roughness of the films range from 0.5 to 26 nm, depending on the type of carrier gas and the plasma‐polymerization time. By estimating changes in thickness, we found that the PBZZ film synthesized by the oxygen plasma‐polymerization process undergoes the slowest rate of etching in CF₄ plasma. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4063–4074, 2004     

Dynamic polarization of lipid bilayers as a special case in the electrochemistry of liquid/liquid interfaces

Dynamically obtained current/voltage curves of bilayer lipid membranes partitioning a solution of lipophilic ions are compared with the results of the type expected in a voltammetry experiment involving ionic transport across a liquid/liquid interface. Lipophilic ions yielding “voltammograms” analogous to reversible and irreversible voltammograms (in conventional electrochemical systems) are reported. Also reported are examples of ions which yield what may be analogous to a masked response, a phenomenon known in the literature of liquid/liquid interfaces. Although the behavior of the two systems is similar, there exist differences in the interpretation of the voltammograms and suggestions are offered for an energetic and mechanistic interpretation of the membrane voltammogram.     

Synthesis of new thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing epoxide pendant groups

A new class of thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing pendant epoxide groups were synthesized and characterized. These new epoxy polymers were prepared through the bromination of poly(2,6‐dimethyl‐1,4‐phenylene oxide) in halogenated aromatic hydrocarbons followed by a Wittig reaction to yield vinyl‐substituted polymer derivatives. The treatment of the vinyl‐substituted polymers with m‐chloroperbenzoic acid led to the formation of epoxidized poly(2,6‐dimethyl‐1,4‐phenylene oxide) with variable pendant ratios, and the structures and properties were studied with nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. The ratios of pendant functional groups were tailored for the polymer properties, and the results showed that the glass‐transition temperatures increased as the benzylic protons were replaced by bromo‐, vinyl‐, or epoxide‐functional groups, whereas the thermal stability decreased in comparison with the original polymer. Within a molar fraction of 20–50%, the degree of functionalization had little effect on the glass‐transition temperature; however, it correlated inversely with the thermal stability of each functionalized polymer. The thermal curing behavior of the epoxide‐functionalized polymer was enhanced by the increment of the pendant functionality, which resulted in a significant increase in the glass‐transition temperature as well as the thermal stability after the curing reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5875–5886, 2006     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

含CdS的聚碳酸醋薄膜的光电效应

近来有一些学者从理论或实践上探讨了模拟植物光合作用的光电化学膜体系用于太阳能转换的可能性。这种体系的核心是一个具有光活性的膜,把两个含有氧化还原偶的水溶液分隔开;当膜受光照时在膜里产生电荷(电子和空穴)的分离,电子到膜的一侧引起一个还原反应而空穴到膜的另一侧引起一个氧化反应。本文用一种聚碳酸酯的透明薄膜(商品名Nuclepore membrane),膜上已用中子照射的方法打好了大小和分布都很均匀的大量微孔,然后在这些微孔里形成CdS沉淀。这样得到的光活性膜体系,改性后在光照时能     

Effect of Deposition in Deep-Bed Filtration: Determination and Search of Rate Parameters

Particle deposition in deep-bed filters (porous media) is, by nature, an unsteady-state process and the extent of deposition plays an important role in determining filter performance. A general method of establishing the relationship between deposition rate and the extent of deposition from effluent concentration history of filters is presented. The efficacy of the method is examined and its utility demonstrated through its applications to certain experimental data. Copyright 2000 Academic Press.     

Diastereoselective Three Component Reaction of N‐Glyoxyloyl Camphorpyrazolidinone,Amine and Allyltributylstannane: Facile Synthesis of Homoallylic Amines

Diastereoselective allylation of imine derived from N‐glyoxyloyl camphorpyrazolidinone and amines was treated with allyltributylstannane in the presence of triflic acid. The corresponding optically enriched homoallylic amines were obtained in reasonable to high material yields and with practical levels of stereoselectivity in 10 min at ambient temperature.     

PHOTOELECTRIC EFFECTS IN DYE-SENSITIZED ARTIFICIAL LIPID MEMBRANES

Using dyes of known redox potentials the specific mechanisms of dark and light potential generation is analyzed in pigmented lipid membranes. The role of the ionic and electronic conductance, as well as the redox potential gradient is specifically related to the observed open circuit voltage developed across the membrane. The results can be most easily explained by the redox electrode model.