Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Pressure response of Raman spectra of water and its implication to the change in hydrogen bond interaction

In situ Raman spectroscopic measurements of water in the region of OH vibration were conducted up to 0.4 GPa at 23 and 52 degrees C. The frequencies of the decomposed OH stretching bands initially decreased with increasing pressure, reached a minimum at 0.15 GPa and increased up to 0.3 GPa and then decreased, which corresponds to the variations of the strength of hydrogen bonding. This variation was observed at 23 degrees C, but not at 52 degrees C, which suggests a change in pressure dependence on the hydrogen bond interaction between these two temperatures. Based on the equilibration model between hydrogen-bonded and nonhydrogen-bonded molecules, the present experimental results indicate that the pressure variation of the viscosity depends on the ratio of hydrogen-bonded molecules, rather than the strength of hydrogen bonding between molecules.     

Changes in the structure of water deduced from the pressure dependence of the Raman OH frequency

We report on the Raman spectra of water under high temperature and pressure conditions and show a discontinuity in the pressure dependence of the OH stretching frequency. As pressure increases, the strength of hydrogen bonding increases rapidly in the pressure ranges up to 0.4+/-0.1 GPa at 25 degrees C, 1.0+/-0.1 GPa at 100 degrees C, and 1.3+/-0.1 GPa at 300 degrees C and slowly above these pressures. This finding clearly demonstrates the existence of discontinuities in the pressure response of the hydrogen bonds of water, which suggests a possible structural change under these conditions.     

Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.     

Structural studies of the carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F: suggestion for the initial activation site for dihydrogen

The carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F has been characterized by X-ray crystallography and absorption and resonance Raman spectroscopy. Nine crystal structures of the [NiFe]hydrogenase in the CO-bound and CO-liberated forms were determined at 1.2-1.4 A resolution. The exogenously added CO was assigned to be bound to the Ni atom at the Ni-Fe active site. The CO was not replaced with H(2) in the dark at 100 K, but was liberated by illumination with a strong white light. The Ni-C distances and Ni-C-O angles were about 1.77 A and 160 degrees, respectively, except for one case (1.72 A and 135 degrees ), in which an additional electron density peak between the CO and Sgamma(Cys546) was recognized. Distinct changes were observed in the electron density distribution of the Ni and Sgamma(Cys546) atoms between the CO-bound and CO-liberated structures for all the crystals tested. The novel structural features found near the Ni and Sgamma(Cys546) atoms suggest that these two atoms at the Ni-Fe active site play a role during the initial H(2)-binding process. Anaerobic addition of CO to dithionite-reduced [NiFe]hydrogenase led to a new absorption band at about 470 nm ( approximately 3000 M(-1)cm(-1)). Resonance Raman spectra (excitation at 476.5 nm) of the CO complex revealed CO-isotope-sensitive bands at 375/393 and 430 cm(-1) (368 and 413 cm(-1) for (13)C(18)O). The frequencies and relative intensities of the CO-related Raman bands indicated that the exogenous CO is bound to the Ni atom with a bent Ni-C-O structure in solution, in agreement with the refined structure determined by X-ray crystallography.     

Oxidation of aromatic hydrocarbons with oxygen in a radiofrequency plasma

The reactions of three aromatic hydrocarbons, benzene, toluene, and styrene, with oxygen in a radiofrequency (r) plasma were investigated. Benzene was oxidized to yield phenol as a single volatile organic product. Similarly, toluene gave the ring oxidation products, cresols, as well as considerable amounts of methyl oxidation products, consisting mainly of benzaldehyde and benzyl alcohol. In contrast, the oxidation of styrene took place predominantly on the olefinic double bond to produce styrene oxide On basis of the products and effects of reaction variables, r power and flow rates of hydrocarbons and oxygen, on the reaction rate, the oxidation mechanism was discussed, particularly focusing on the intermediate species responsible for the formation of major products.     

An oxazaphospholidine approach for the stereocontrolled synthesis of oligonucleoside phosphorothioates

The stereocontrolled synthesis of oligodeoxyribonucleoside phosphorothioates (PS-ODNs) using nucleoside 3'-O-oxazaphospholidine derivatives as monomer units is described. 2-Chloro-1,3,2-oxazaphospholidine derivatives were prepared from six kinds of enantiopure 1,2-amino alcohols and used for the phosphitylation reactions of 5'-O-protected nucleosides. A detailed study of these reactions revealed that the diastereoselectivity of the reaction depended on the structure of the enantiopure 1,2-amino alcohol, the reaction temperature, and the amine used as a scavenger of HCl. In addition, ab initio molecular orbital calculations for the 2-chlorooxazaphospholidine derivatives were carried out to elucidate the mechanism of these diastereoselective phosphitylation reactions. The LUMO of the 2-chloro-5-phenyloxazaphospholidine derivatives on the phosphorus atom was found to be almost orthogonal to the P-Cl bond. This LUMO may be involved in the phosphitylation reactions with predominant retention of the P-configuration. A series of dialkyl(cyanomethyl)ammonium salts were developed and used as activators for the condensation reactions of the diastereopure nucleoside 3'-O-oxazaphospholidines with 3'-O-protected nucleosides. In the presence of the new activators, the reactions proceeded rapidly to give the corresponding dinucleoside phosphite triesters. The diastereoselectivity of the condensation reaction did not depend on the counteranion but on the structure of the dialkyl(cyanomethyl)amine. In the presence of the activator, which consists of a relatively small dialkyl(cyanomethyl)amine, the condensation proceeded with excellent diastereoselectivity. After sulfurization and deprotection, diastereopure (R(p))- and (S(p))-dinucleoside phosphorothioates were obtained in excellent yields. The present methodology was also applied to the solid-phase synthesis of stereoregulated PS-ODNs. all-(R(p))-[T(PS)](3)T, all-(S(p))-[T(PS)](3)T, all-(R(p))-d[G(PS)A(PS)C(PS)]T, and all-(R(p))-[T(PS)](9)T were synthesized on a highly cross-linked polystyrene resin.     

Diastereocontrolled synthesis of dinucleoside phosphorothioates using a novel class of activators, dialkyl(cyanomethyl)ammonium tetrafluoroborates

A novel class of activators, dialkyl(cyanomethyl)ammonium tetrafluoroborates 1a-c, has been developed and applied to the condensations of diastereopure 5'-O-tert-butyldiphenylsilylthymidine 3'-cyclic phosphoramidites 3a-d with 3'-O-tert-butyldimethylsilylthymidine (4a). Among them, the condensation of 3a with 4a in the presence of 1a completed within 5 min and gave only one diastereoisomer of the corresponding phosphite 5a. After sulfurization and deprtection, almost diastereopure (Rp)-TpsT 7 was obtained (d.r. = 99:1). Next the 5'-O-(DMTr)nucleoside 3'-phosphoramidites 8a-d containing thymine, N6-benzoyladenine, N4-benzoylcytosine, and N2-phenylacetylguanine have been synthesized and allowed to condense with 3'-O-protected thymidine and 2'-deoxyadenosine. The 5'-O-DMTr group and the N-acyl groups of the nucleobases were compatible with the reaction conditions and the condensations completed quickly with excellent diastereoselectivity.     

Rational design of CH/pi interaction sites in a basic resolving agent

A novel synthetic basic resolving agent, cis-1-aminobenz[f]indan-2-ol (ABI), was rationally designed by introducing effective CH/pi interaction sites to cis-1-aminoindan-2-ol (AI), whose chiral recognition ability has been reported from our laboratory. ABI was applicable to a wide variety of racemic arylalkanoic acids and showed moderate to excellent chiral recognition ability, which was obviously higher than that of AI. The fundamental and important role of CH/pi interactions, such as tunable CH(sp(2))/pi and CH(sp(3))/pi interactions, in the chiral recognition by ABI was revealed by X-ray crystallographic study.