Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Solvent-adaptable silver nanoparticles

A simple and efficient way of obtaining silver nanoparticles that are dispersible both in organic and in aqueous solvents using a single capping agent is described. The silver nanoparticles are initially prepared in water in the presence of aerosol OT [sodium bis(2-ethylhexyl)-sulfosuccinate, AOT]. Thereafter, transfer of the AOT-capped silver nanoparticles to an organic phase is induced by the addition of a small amount of orthophosphoric acid during shaking of the biphasic mixture. The AOT-stabilized silver nanoparticles could be separated out from the organic phase in the form of a powder. The hydrophobic nanoparticles thus prepared are stable and are readily resuspended in a variety of other polar (including water) and nonpolar solvents without further surface treatment. The amphiphatic nature of the silver surface is brought about by a small orientational change in the AOT monolayer on the silver surface in response to the polarity of the solvent.     

JR 400–NaAOT interaction: a detailed thermodynamic study of polymer–surfactant interaction bearing opposite charges

The present study entails interaction between the cationic polymer N,N-dimethylhydroxyethyl cellulose (JR 400) and the double-tailed anionic surfactant Na-bis-2-ethyhexylsulphosuccinate (NaAOT). This oppositely charged polymer and surfactant are expected to cause coacervation and precipitation; hence, we have observed formation of thick solution similar to diluted gel at [JR 400]?~?0.01 and 0.10 %?w/v in aqueous solution. Viscometry, conductometry, tensiometry, and microcalorimetry techniques are used to monitor the interaction process. The results are explained in the light of both intrachain and interchain linking by way of NaAOT reverse micelle formation. Adsorption of NaAOT monomers onto the charged side chains of the polymer shields interchain electrostatic repulsion, leading to the formation of hydrophobic microdomains and microscopic heterogeneity in the solution. The morphologies of the domains depend on the level of addition of NaAOT in the system. The different stages of physiochemical changes that arise in solution have been identified by the use of different techniques, and correlations of the results have been attempted in terms of pragmatic models.     

Controlling the lifetime of cucurbit[8]uril based self-abolishing nanozymes

Nature has evolved a unique mechanism of self-regulatory feedback loops that help in maintaining an internal cellular environment conducive to growth, healing and metabolism. In biology, enzymes display feedback controlled switchable behaviour to upregulate/downregulate the generation of metabolites as per the need of the cells. To mimic the self-inhibitory nature of certain biological enzymes under laboratory settings, herein, we present a cucurbit[8]uril based pH responsive supramolecular peptide amphiphile (SPA) that assembles into hydrolase mimetic vesicular nanozymes upon addition of alkaline TRIS buffer (activator) but disintegrates gradually owing to the catalytic generation of acidic byproducts (deactivator). The lifetime of these nanozymes could be manipulated in multiple ways, either by varying the amount of catalytic groups on the surface of the vesicles, by changing the acid generating substrate, or by changing the ratio between the activator and the substrate. The self-inhibitory nanozymes displayed highly tunable lifetimes ranging from minutes to hours, controlled and in situ generation of deactivating agents and efficient reproducibility across multiple pH cycles.

Self-inhibitory feedback regulated transient assembly of a CB[8] based nanozyme is reported whose lifetime can be manipulated in multiple ways, ranging from minutes to hours.     

Mixed micellization of anionic–nonionic surfactants in aqueous media: a physicochemical study with theoretical consideration

Mixed micellization of binary and ternary mixtures of anionic and nonionic surfactants, such as lithium dodecyl sulfate, polyoxyethylene(23)laurylether, and polyoxyethylene-tert-octylphenylether, is studied in aqueous solution using tensiometric, conductometric, and spectrophotometric methods. Although tensiometry and conductometry complement each other closely, the spectroscopic critical micellar concentration (cmc) is far from agreement with tensiometric study. Several parameters, e.g., cmc, degree of counterion binding, free energies of micellization, and interfacial adsorption, have been evaluated. Established theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Blankschtein were applied to evaluate the mole fraction of different components in the self-aggregated phase, the interaction parameter, free energy contributions, and expected cmc.     

Naphthyridine-based receptors for flurometric detection of urea and biotin

Naphthyridine-based receptors 1–4 have been designed and synthesized for the recognition of urea in CHCl₃ containing 1% CH₃CN. Receptor 1 also binds biotin and its methyl ester with moderate binding constant values. In comparison, receptor 2 is less efficient in recognising biotin and its methyl ester analogue. Receptor 1 binds urea and biotin with binding constant values of 1.02 × 10⁴ and 1.08 × 10⁴ M^?1, respectively, in CHCl₃ containing 1% CH₃CN and shows significant change in emission of naphthyridine upon complexation. Characterization and sensing properties of the receptors were evaluated by ¹H NMR, UV–vis and fluorescence spectroscopic methods.     

Grafting of organosilane derived from 3-glycidoxypropyltrimethoxysilane and thiourea onto magnesium phyllosilicate by sol–gel process and investigation of metal adsorption properties

A layered inorganic–organic magnesium silicate (Mg-GTPS-TU) has been successfully synthesized by using sol–gel based precursor under mild temperature conditions and a new silylaing agent (GTPS-TU) derived from 3-glycidoxypropyltrimethoxysilane (GTPS) and thiourea (TU) as the silicon source. The hybrid material was characterized through elemental analysis, infrared spectroscopy, X-ray diffractometry, thermogravimetry, and carbon and silicon solid-state nuclear magnetic resonance spectroscopy. The result confirmed the attachment of organic functionality to the inorganic silicon network. The inter-lamellar distance for the hybrid material was found to be 18.8 Å. Metal adsorption characteristics follows Cr(III) >Mn(II)>Zn(II) with more affinity towards Cr(III) in dilute aqueous solution. Evaluation of thermodynamic parameters ΔH and ΔS for Cr(III) were found to be 25.44 J mol⁻¹ and 79.9 J mol⁻¹ K⁻¹, respectively, indicating adsorption process to be endothermic in nature. The negative value of ΔG indicated the feasibility and spontaneity of ongoing adsorption process at relatively higher temperature. The presence of multiple coordination sites in the attached organic functionality expresses the potentiality of the hybrid material containing new silylating agent for heavy cation removal from eco-system.     

The methods of determination of critical micellar concentrations of the amphiphilic systems in aqueous medium

Science is the attempt to make the chaotic diversity of our sense-experience to a logically unified system of thought. A sound theoretical basis and a rational physicochemical understanding based on experimental findings lead to a proper understanding of a topic. Colloid chemistry strengthened its footing by the extensive studies on gold sols by Michael Faraday in 1850s, however, the term “colloid” was coined by Thomas Graham in 1861. Historically, the Stone Age paintings in the Lascaux cave in France and the written records of Egyptian pharaohs were produced with stabilized colloid pigments. The part of colloid science dealing with amphiphilic molecules is so diverse on its own that it is dealt in a separate branch called the “association colloid”. A key development in the study of association colloids was the observation by James McBain that the osmotic pressure of salts of alkali metal fatty acid displayed a pronounced break in the concentration beyond a specific characteristic concentration, after which the osmotic coefficient remained almost constant (Evans and Wennerstrom, 1994). McBain attributed this fact to the self-association of these molecules among themselves (McBain, 1913, McBain, 1944) in solution. Here, we are providing a molecular as well as thermodynamic approach toward the micellization process.