Quantification problems in depth profiling of pwr steels using Ar+ ion sputtering and XPS analysis.

The oxide scales of AISI 304 formed in boric acid solutions at 300 degrees C and pH = 4.5 have been studied using X-ray photoelectron spectroscopy (XPS) depth profiling. The present focus is depth profile quantification both in depth and chemical composition on a molecular level. The roughness of the samples is studied by atomic force microscopy before and after sputtering, and the erosion rate is determined by measuring the crater depth with a surface profilometer and vertical scanning interferometry. The resulting roughness (20-30 nm), being an order of magnitude lower than the crater depth (0.2-0.5 microm), allows layer-by-layer profiling, although the ion-induced effects result in an uncertainty of the depth calibration of a factor of 2. The XPS spectrum deconvolution and data evaluation applying target factor analysis allows chemical speciation on a molecular level. The elemental distribution as a function of the sputtering time is obtained, and the formation of two layers is observed-one hydroxide (mainly iron-nickel based) on top and a second one deeper, mainly consisting of iron-chromium oxides.     

Spreading Code Design Using a Global Optimization Method

The performance of a code division multiple access system depends on the correlation properties of the employed spreading code. Low cross-correlation values between spreading sequences are desired to suppress multiple access interference and to improve bit error performance. An auto-correlation function with a distinct peak enables proper synchronization and suppresses intersymbol interference. However, these requirements contradict each other and a trade-off needs to be established. In this paper, a global two dimensional optimization method is proposed to minimize the out-of-phase average mean-square aperiodic auto-correlation with average mean-square aperiodic cross-correlation being allowed to lie within a fixed region. This approach is applied to design sets of complex spreading sequences. A design example is presented to illustrate the relation between various correlation characteristics. The correlations of the obtained sets are compared with correlations of other known sequences.     

Hydrogen-induced metallization on Ge(1 1 1) c(2 × 8)

We have studied hydrogen adsorption on the Ge(1 1 1) c(2 × 8) surface using scanning tunneling microscopy (STM) and angle-resolved photoelectron spectroscopy (ARPES). We find that atomic hydrogen preferentially adsorbs on rest atom sites. The neighbouring adatoms appear higher in STM images, which clearly indicates a charge transfer from the rest atom states to the adatom states. The surface states near the Fermi-level have been followed by ARPES as function of H exposure. Initially, there is strong emission from the rest atom states but no emission at the Fermi-level which confirms the semiconducting character of the c(2 × 8) surface. With increasing H exposure a structure develops in the close vicinity of the Fermi-level. The energy position clearly indicates a metallic character of the H-adsorbed surface. Since the only change in the STM images is the increased brightness of the adatoms neighbouring a H-terminated rest atom, we identify the emission at the Fermi-level with these adatom states.     

GnRH binding RNA and DNA Spiegelmers: a novel approach toward GnRH antagonism

Mirror-image oligonucleotide ligands (Spiegelmers) that bind to the pharmacologically relevant target gonadotropin-releasing hormone I (GnRH) with high affinity and high specificity have been identified using the Spiegelmer technology. GnRH is a decapeptide that plays an important role in mammalian reproduction and sexual maturation and is associated with several benign and malignant diseases. First, aptamers that bind to D-GnRH with dissociation constants of 50-100 nM were isolated out of RNA and DNA libraries. The respective enantiomers of the DNA and RNA aptamers were synthesized, and their binding to L-GnRH was shown. These Spiegelmers bind to L-GnRH with similar affinity to that of the corresponding aptamers that bind to D-GnRH. We further demonstrated dose-dependent inhibition of GnRH-induced Ca(2+) release in Chinese hamster ovary cells that were stably transfected with the human GnRH receptor.     

Bi- and trinuclear oxalamidinate complexes of palladium as catalysts in the copper-free Sonogashira reaction and in the Negishi reaction

The binuclear complex [(acac)Pd(oxam)Pd(acac)] 1 (oxam: tetraphenyl oxalic amidinate) has been prepared from H₂oxam and Pd(acac)₂ in excellent yield. The complex was characterized by elemental analyses, mass spectroscopy, ¹H NMR, ¹³C NMR spectroscopy and in the solid state by X-ray single crystal diffraction analyses. 1 consists of a bimetallic centrosymmetric unit in which the planar oxam ligand acts in a bis-chelating fashion. Each palladium center is in a planar environment.The complex 1 acts as highly selective pre-catalyst in the copper-free Sonogashira reaction between 4-bromoacetophenone and phenylacetylene. Its long-time catalytic activity is higher than that of the related binuclear complex 2 (oxam: tetra-p-tolyl oxalic amidinate) or that of the trinuclear compound [(acac)Pd(oxam)Zn(oxam)Pd(acac)] (3), the solid-state structure of which was also determined by an X-ray structural analysis of single crystals. In addition, 2 is an active and extremely selective pre-catalyst for the Negishi reaction between 3,5,6,8-tetrabromophenanthroline and R-CC-ZnCl (R: Ph, (ⁱprop)₃Si) to form tetra-alkyne-substituted derivatives.     

Detection of trace amounts of Ni by laser-induced fluorescence in graphite furnace with intensified charge coupled device

A laser-induced fluorescence in graphite furnace (LIF-GF) set-up has been equipped with an intensified CCD detector (ICCD) that enables simultaneous multichannel detection of large wavelength regions. The main advantages of such a system in comparison with conventional photomultiplier detection are: simultaneous detection of several fluorescence wavelengths for easy characterization of excitation and fluorescence spectra and for an increase of the absolute sensitivity and spectral selectivity; simultaneous monitoring of background signals, such as those due to matrix interferences, blackbody radiation and scattered laser light; decrease of the susceptibility to radio-frequency pick-ups emitted from the pump laser due to the delayed read-out procedure; time-resolved studies of fluorescence spectra for improved elemental selectivity or for studies of atomization processes, and a possibility to perform two-dimensional imaging of height distributions of atomization and, in combination with an imaging spectrometer, diffusion processes in the furnace. The first work on LIF-GF with ICCD detection has been performed on Ni. The most sensitive and versatile excitation and detection wavelengths have been identified. Detection limits in water solutions by the LIF-GF technique have been improved by two orders of magnitude and are found to be 0.015 pg with ICCD and 0.01 pg using a photomultiplier at the most sensitive excitation and detection wavelengths. Nickel in concentrations has been detected in aqueous standard reference samples with sodium concentrations ranging from to % (riverine water and estuarine water) with good accuracy and precision. The Ni contents of standard riverine and estuarine water were determined to 1.00 ± 0.11 and 0.75 ± 0.07 ng/ml, respectively. The certified concentrations are 1.03 ± 0.10 and 0.743 ± 0.078 .     

Syntheses of anomerically phosphodiester-linked oligomers of the repeating units of the Haemophilus influenzae types c and f capsular polysaccharides

Spacer-equipped dimers and trimers of the repeating units of the capsular polysaccharide of Haemophilus influenzae type c, -4)-3-O-Ac-beta-D-GlcpNAc-(1-->3)-alpha-D-Galp-(1-OPO(3-)-, and type f, -3)-beta-D-GalpNAc-(1-->4)-3-O-Ac-alpha-D-GalpNAc-(1-OPO(3-)-, have been synthesized for use in immunological studies. H-Phosphonate chemistry was used for the formation of the interglycosidic phosphate diester linkages. Two types of building blocks, a spacer glycoside disaccharide starting monomer (15 and 22) and an anomeric monoester alpha-H-phosphonate disaccharide elongating monomer (12 and 27), were built up for each serotype structure from properly protected monosaccharide precursors using mainly thioglycosides as glycosyl donors. Stereospecificity in the formation of the alpha-linked monoester H-phosphonate was possible in type c through crystallization of the pure alpha-anomer of the precursor hemiacetal from an alpha/beta-mixture, whereas in type f, the hemiacetal was isolated directly as exclusively the alpha-anomer. Subsequent phosphonylation using triimidazolylphosphine was performed without anomerization. Formation of the anomeric phosphate diester linkages was performed using pivaloyl chloride as coupling reagent followed by I(2)/H(2)O oxidation of the formed diester H-phosphonates. Original experiments afforded no diester product at all, but optimization of the oxidation conditions (lowering the temperature and dilution with pyridine prior to I(2) addition) gave the dimers in good yields (71% and 81%) and, subsequently, after removal of a temporary silyl protecting group in the dimers, the trimers in fair yields (36% and 37%), accompanied by hydrolysis of the dimer phosphate linkage. One-step deprotection through catalytic hydrogenolysis efficiently afforded the target dimer (30 and 36) and trimer structures (32 and 39). The synthetic scheme allows for further elongation to give higher oligomers.     

Phase stability in the systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba): electron concentration and size controlled variations on the laves phase structural theme

The systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba) display electron concentration induced Laves phase structural changes. However, the complete sequence MgCu2 --> MgNi2 --> MgZn2 with increasing x (decreasing electron count) is only observed for Ae = Ca. Compounds SrAl(2-x)Mgx (0 < x < or = 2) and BaAl(2-x)Mgx (x = 0.85 and 2.0) were synthesized and structurally characterized by X-ray diffraction experiments. For the Sr system the structural sequence CeCu2 --> MgNi2 --> MgZn2 occurs with increasing Mg content x. Thus, larger Sr does not allow the realization of the MgCu2 structure at low x. For Ae = Ba a binary compound BaAl2 does not exist, but more Ba-rich Ba7Al13 forms. The reinvestigation of the crystal structure of Ba7Al13 by selected area and convergent beam electron diffraction in a transmission electron microscope revealed a superstructure, which subsequently could be refined from single X-ray diffraction data. The formula unit of the superstructure is Ba21Al40 (space group P31m, Z = 1, a = 10.568(1) angstroms, c = 17.205(6) angstroms). In Ba21Al40 a size match problem between Ba and Al present in Ba7Al13 is resolved. The structure of Ba7Al13 (Ba21Al40) can be considered as a Ba excess variant of the hexagonal MgNi2 Laves phase type structure. An incommensurately modulated variant of the MgNi2 structure is obtained for phases BaAl(2-x)Mgx with x = 0.8-1. At even higher Mg concentrations a structural change to the proper MgZn2 type structure takes place.     

Dibenzotetraaza crown ethers: a new family of crown ethers based on o-phenylenediamine

Dibenzotetraaza (DBTA) crown ethers possess two o-phenylenediamine moieties. They are homologues of dibenzo crown ether phase-transfer catalysts and were prepared from the condensation of benzimidazoles with oligo(ethyleneglycol) dichlorides and oligo(ethyleneglycol) ditosylates. Compounds with ring sizes ranging from 18-crown-6 to 42-crown-14 were prepared. In addition, various altered benzimidizoles were used to produce DBTA crown ethers with modified substituents and ether bridges, as well as benzimidazolidine crown ethers. The synthetic approach presented here proved to be a convenient route to a new family of crown ethers with overall yields of up to 48% based on the benzimidazole. Yields for the ring-closing step were generally high, ranging from 51% to 94%, without the need for high-dilution conditions. Reaction of the DBTA crown ethers with alkyl and benzyl halides was found to be a facile way to obtain the corresponding tetra(N-organyl) compounds. Picrate extraction studies were carried out to determine phase-transfer catalytic capabilities. Extraction efficiencies for alkali-metal ions were lower than those for dibenzo-18-crown-6. Efficiencies were higher for other metal ions, with some selectivity for Pb(2+). Tetra(N-methyl) DBTA-18-crown-6 generally exhibited higher extraction efficiencies than its N-H analogue, but the selectivity was lower.     

The use of bis(diphenylphosphino)amines with N-aryl functionalities in selective ethylene tri- and tetramerisation

A systematic study was conducted on the Cr catalysed tri- and tetramerisation of ethylene using bis(diphenylphosphino)amine ligands with N-aryl functionality. This study revealed that the oligomerisation reaction product selectivity is primarily dependent on the structure and size of the N-aryl groups.

Addition of sufficient steric bulk to the N-phenyl group via ortho-alkyl substitution increased the combined 1-hexene and 1-octene selectivity (overall alpha selectivity) to above 82% at an overall 1-octene selectivity of 56%. The introduction of a single carbon spacer between the N-atom and the aryl-moiety, as well as the addition of branching on this carbon, resulted in further selectivity improvements, achieving an overall 1-octene selectivity of 64% and an overall alpha selectivity of 84%. This was obtained at catalyst productivities in excess of 1,000,000 g/g Cr/h.