A Finite Element Galerkin Method for a Unidimensional Single-Phase Nonlinear Stefan Problem with Dirichlet Boundary Conditions

Based on straightening the free boundary, an H¹-Galerkin methodis proposed and analysed for a single-phase nonlinear Stefanproblem with Dirichlet boundary conditions. Optimal H¹ estimatesfor continuous-time Galerkin approximations are derived.     

Laser cooling of vibrational degrees of freedom of a molecular system

We consider the cooling of vibrational degrees of freedom in a photoinduced excited electronic state of a model molecular system. For the various parameters of the potential surfaces of the ground and excited electronic states and depending on the excitation frequency of a single-mode laser light, the average energy or average vibrational temperature of the excited state passes through a minimum. The amount of cooling is quantified in terms of the overlap integral between the ground and excited electronic states of the molecule. We have given an approach to calculate the Franck-Condon factor for a multimode displaced-distorted-rotated oscillator surface of the molecular system. This is subsequently used to study the effect of displacement, distortion, and Duschinsky rotation on the vibrational cooling in the excited state. The absorption spectra and also the average energy or the effective temperature of the excited electronic state are studied for the above model molecular system. Considering the non-Condon effect for the symmetry-forbidden transitions, we have discussed the absorption spectra and average temperature in the excited-state vibrational manifold.     

Kinetics and mechanism of the reaction oftrans-cyclohexane-1,2-diamine-N N N' N'-tetra-acetatomanganate(III) with substituted thioureas in aqueous medium

Summary The kinetics of reduction of [Mn^III(cydta)]^– (where H₄cydta=trans-cyclohexane-1,2-diamine-N N N' N'-tetraacetic acid) by some thiourea reductants have been studied in aqueous solution by stopped-flow techniques in the pH ranges 2.5–4.5 and 9.2–10.2. An initial increase in absorbance followed by a steady decrease indicated the formation of a precursor complex prior to the electron transfer step. The reactions are first order in both oxidant and reductant. The observed increase in rate in going from low to high pH is attributed to the difference in reactivities of the aqua and hydroxo species of the Mn^III complex; the higher reactivity of the latter is consistent with the formation of a ligand-bridged activated species prior to electron transfer. The reactivity order for the thiourea derivatives follows the order of their reported substituent effects.     

Biotechnological storage and utilization of entrapped solar energy

Our laboratory has recently developed a device employing immobilized F₀F₁ adenosine triphosphatase (ATPase) that allows synthesis of adenosine triphosphate (ATP) from adenosine 5′-diphosphate and inorganic phosphate using solar energy. We present estimates of total solar energy received by Earth’s land area and demonstrate that its efficient capture may allow conversion of solar energy and storage into bonds of biochemicals using devices harboring either immobilized ATPase or NADH dehydrogenase. Capture and storage of solar energy into biochemicals may also enable fixation of CO₂ emanating from polluting units. The cofactors ATP and NADH synthesized using solar energy could be used for regeneration of acceptor d-ribulose-1,5-bisphosphate from 3-phosphoglycerate formed during CO₂ fixation.     

A family of oxorhenium(v) complexes incorporating chelated monoanionic ONN reduced Schiff base and dianionic ONNO tetradentate ligands: synthesis, spectroscopic and electrochemical studies

The green colored complexes of the type Re(V)O(L(SB))Cl(2), 1, have been synthesised by reacting NBu(4)[ReOCl(4)] with HL(SB) in dry ethanol. Here, L(SB)(-) are the deprotonated forms of N-(2-hydroxybenzyl)-2-picolylamine (HL(SB)(1)); N-(2-hydroxybenzyl)-N',N'-dimethylethylenediamine (HL(SB)(2)) and N-(2-hydroxybenzyl)-N',N'-diethylethylenediamine (HL(SB)(3)). Similarly, NBu(4)[ReOCl(4)] reacted with N,N-bis(2-hydroxybenzyl)-2-picolylamine (H(2)L(1)); N,N-bis(2-hydroxybenzyl)-N',N'-dimethylethylenediamine (H(2)L(2)); N,N-bis(2-hydroxybenzyl)-N',N'-diethylethylenediamine (H(2)L(3)); [N-(2-hydroxybenzyl)-N-(2-pyridylmethyl)]-2-aminoethanol (H(2)L(4)); [N-(2-hydroxybenzyl)-N-(2-pyridylmethyl)]-2-methyl-2-amino-1-propanol (H(2)L(5)); N,N-bis(1-hydroxyethyl)-2-picolylamine (H(2)L(6)), to give the monochloro complexes Re(V)O(L)Cl, 2. The X-ray structures of the complexes are reported. The molecular structures observed in the solid state are preserved in solution ((1)H NMR). In acetonitrile solution the Re(V)O(L)Cl, 2, display a one-electron couple, Re(VI)O(L)Cl(+)-Re(V)O(L)Cl, near 1.0 V vs SCE. The electrogenerated hexavalent complexes [Re(VI)O(L)Cl]ClO(4), 3, are paramagnetic and display sextet EPR spectra in solution at room temperature (A(av) approximately 417 (G), g approximately 1.914).     

Detection of OH on photolysis of styrene oxide at 193 nm in gas phase

Photodissociation of styrene oxide at 193 nm in gas phase generates OH, as detected by laser-induced fluorescence technique. Under similar conditions, OH was not observed from ethylene and propylene oxides, primarily because of their low absorption cross-sections at 193 nm. Mechanism of OH formation involves first opening of the three-membered ring from the ground electronic state via cleavage of either of two CO bonds, followed by isomerization to enolic forms of phenylacetaldehyde and acetophenone, and finally scission of the COH bond of enols. Ab initio molecular orbital calculations support the proposed mechanism.     

Recent development in the field of ceramics solid-state electrolytes: I—oxide ceramic solid-state electrolytes

Journal of Solid State Electrochemistry - Many elements in the periodic table form ionic compounds; the crystal lattices of such compounds contain cations and anions, which are arranged in the way...     

Thiol Modified Chitosan Self-Assembled Monolayer Platform for Nucleic Acid Biosensor

A self-assembled monolayer (SAM) of thiol modified chitosan (SH-CHIT), with thioglycolic acid (TGA) as a modifier to bestow thiol groups, has been prepared onto gold (Au)-coated glass plates for fabrication of the nucleic acid biosensor. The chemical modification of CHIT via TGA has been evidenced by Fourier transform infrared spectroscopy (FT-IR) studies, and the biocompatibility studies reveal that CHIT retains its biocompatible nature after chemical modification. The electrochemical studies conducted onto SH-CHIT/Au electrode reveal that thiol modification in CHIT amino end enhances the electrochemical behavior indicating that it may be attributed to delocalization of electrons in CHIT skeleton that participates in the resonance process. The carboxyl group modified end of DNA probe has been immobilized onto SH-CHIT/Au electrode using N-ethyl-N′-(3-dimethylaminopropyl)carbodimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for detection of complementary, one-base mismatch and non-complementary sequence using electrochemical and optical studies for Mycobacterium tuberculosis detection. It has been found that DNA-SH-CHIT/Au bioelectrode can specifically detect 0.01 μM of target DNA concentration with sensitivity of 1.69?×?10^?6 A μM^?1.     

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.     

Kinetic studies on the reduction of a nickel (III) oxime-imine complex by sulphur(IV) and selenium(IV)

The kinetics of the reduction of [Ni^III(L¹)]²⁺ (where HL¹ = 15-amino-3-methyl-4,7,10,13-tetraazapentadec-3-en-2-one oxime) by sulphur(IV) and selenium (IV) over the regions pH 2.50–8.02 and 2.01–4.00 respectively have been investigated at 30°C. Attempts were made to evaluate the reactivity of all the reacting species, of sulphur(IV) and selenium(IV) by considering suitable pH ranges. The oxidation of SC₂·H₂O and HSO ₃ ⁻ is proposed to proceed through the formation of a hydrogen-bonded adduct. The reaction with SO ₃ ²⁻ seems to follow a direct outer-sphere route which is well supported by Marcus crossrelation calculation. The oxidation of HSeO _l3 ⁻ is ≈ 10³ times slower than that of H₂SeO₃. The kinetic data indicate that the oxidation of sulphur(IV) by [Ni^IIIL¹)]²⁺ is much more favourable as compared to the corresponding oxidation of selenium(IV).