4-Transitivity and 6-figures in some Moufang-Klingenberg planes

In this paper, the Moufang-Klingenberg plane over a local alternative ring R of dual numbers is studied. It is shown that its collineation group is transitive on quadrangles. It is therefore shown that the coordinatization of these Moufang-Klingenberg planes is independent of the choice of the coordinatization quadrangle. Also, the concept of 6-figures is extended to these Moufang-Klingenberg planes and it is shown that any 6-figure corresponds to only one inversible m ∈ R.     

New 6-(4-Bromophenyl)-imidazo[2,1-b]thiazole Derivatives: Synthesis and Antimicrobial Activity

Summary.  New 4-alkyl/aryl-1-((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-3-thiosemicarbazides and 3-alkyl/aryl-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinones were synthesized from 6-(4-bromophenyl)-imidazo[2,1-b]thiazole-3-acetic acid hydrazide. Their structures were elucidated by elemental analyses and spectroscopic data. All compounds were tested for antibacterial and antifungal activities. The antimicrobial activities of the compounds were assessed by the microbroth dilution technique. The compounds were also evaluated for antituberculosis activity against Mycobacterium tuberculosis H₃₇Rv (ATCC 27294); they exhibited varying degrees of inhibition in the in vitro primary screening at 6.25 μg · cm⁻³. The most active compound was 3-(4-nitrophenyl)-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinone. Corresponding author. E-mail: nurayulusoy@yahoo.com Received December 10, 2001. Accepted (revised) March 1, 2002     

Multiprocessor task scheduling in multistage hybrid flow-shops: a genetic algorithm approach

This paper considers multiprocessor task scheduling in a multistage hybrid flow-shop environment. The objective is to minimize the make-span, that is, the completion time of all the tasks in the last stage. This problem is of practical interest in the textile and process industries. A genetic algorithm (GA) is developed to solve the problem. The GA is tested against a lower bound from the literature as well as against heuristic rules on a test bed comprising 400 problems with up to 100 jobs, 10 stages, and with up to five processors on each stage. For small problems, solutions found by the GA are compared to optimal solutions, which are obtained by total enumeration. For larger problems, optimum solutions are estimated by a statistical prediction technique. Computational results show that the GA is both effective and efficient for the current problem. Test problems are provided in a web site at www.benchmark.ibu.edu.tr/mpt-hfsp.     

The strong solution of the Monge–Ampère equation on the Wiener space for log-concave densities

Let (W,H,μ) be an abstract Wiener space, assume that $\text{d}\text{ν=L}\text{d}\text{μ}$ is a second probability measures on $\text{(W,}\text{B}\text{(W))}$ such that $\text{L=}\text{1}\text{c}\text{exp}\text{?f}$, with $\text{f∈}\text{D}{}_{\mathrm{2,1}}$ lower bounded and H-convex. Let $\text{T=I}{}_{\mathrm{W}}\text{+??,}\text{?∈}\text{D}{}_{\mathrm{2,1}}$, be the solution of the Monge problem transporting μ to ν and realizing the H-Wasserstein distance between μ and ν. We prove that $\text{?∈}\text{D}{}_{\mathrm{2,2}}$ hence the Gaussian Jacobian $\text{Λ=}\text{det}{}_2\text{(I+?}{}^2\text{?)}\text{exp}\text{{}\text{L}\text{??1/2|??|}{}_{\mathrm{H}}{}^2\text{}}$ is well-defined and T is the strong solution of the Monge–Ampère equation ΛL°T=1 a.s. on W. To cite this article: D. Feyel, A.S. Üstünel, C. R. Acad. Sci. Paris, Ser. I 339 (2004).     

Determination of lead and nickel in Apple-Leaves and sea-water by electrothermal atomic absorption spectrometry after solid-phase extraction using Chromosorb-107 filled in a syringe

Lead and nickel were concentrated and separated after sorbing on Chromosorb-107 filled in a syringe prior to their determination by electrothermal atomic absorption spectrometry. To retain the analytes, the sample solution treated with or without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Then the analyte elements were eluted by drawing and discharging the suitable eluent. The optimum experimental conditions for quantitative recoveries of analytes (amount of sorbent, pH of sample, concentration and kind of eluent, flow rates of sample and eluent and adding of the effect of complexing agent) were investigated. Nickel was quantitatively retained at pH6 irrespective of whether it was complexed with APDC while the quantitative sorption of lead was achieved at pH8 only if it was treated with APDC prior to passing through the sorbent. The lead and nickel retained on the sorbent were eluted drawing and discharging 4.5 M HNO(3), respectively. If the concentration of analyte elements in the sample were too low to be detected, then they were concentrated by increasing the ratio of sample value to eluent volume as needed. The lead and nickel in spiked sea-water samples and in certified reference Apple-Leaves (NIST SRM 1515) standards were quantitatively (95%) recovered with R.S.D. of around +/-2%.     

Determination of lead, copper and manganese by graphite furnace atomic absorption spectrometry after separation/concentration using a water-soluble polymer

In this study, a water-soluble polymer, polyvinylpyrrolidinone (PVP) having chelating functionalities was used for the preconcentration and separation of traces of Pb, Cu, Ve and Mn prior to their determination by graphite furnace atomic absorption spectrometry. For this purpose, the sample and the PVP solutions were mixed and the metal bound polymer was precipitated by adding the mixture onto acetone. The precipitate was separated by decantation and dissolved with water. By increasing the ratio of the volumes of sample to water used in dissolving the precipitate, the analyte elements were concentrated as needed. The concentration of trace elements was determined using graphite furnace atomic absorption spectrometry. The analyte elements in matrix free aqueous solutions were quantitatively recovered. The validity of the proposed method was checked with a standard reference material (NIST SRM 1577b bovine liver) and spiked fruit juice, sea water and mineral water samples. The analytical results were found to be in good agreement with certified and added values. Detection limits (3δ) were 1.7, 3.6 and 4.1 μg l⁻¹ for Pb, Cu and Mn, respectively, using 10 μl of sample volume. The method is novel and can be characterized by rapidity, simplicity, quantitative recovery and high reproducibility.     

Building an Iron Chromophore Incorporating Prussian Blue Analogue for Photoelectrochemical Water Oxidation

The replacement of traditional ruthenium-based photosensitizers with low-cost and abundant iron analogs is a key step for the advancement of scalable and sustainable dye-sensitized water splitting cells. In this proof-of-concept study, a pyridinium ligand coordinated pentacyanoferrate(II) chromophore is used to construct a cyanide-based CoFe extended bulk framework, in which the iron photosensitizer units are connected to cobalt water oxidation catalytic sites through cyanide linkers. The iron-sensitized photoanode exhibits exceptional stability for at least 5 h at pH 7 and features its photosensitizing ability with an incident photon-to-current conversion capacity up to 500 nm with nanosecond scale excited state lifetime. Ultrafast transient absorption and computational studies reveal that iron and cobalt sites mutually support each other for charge separation via short bridging cyanide groups and for injection to the semiconductor in our proof-of-concept photoelectrochemical device. The reorganization of the excited states due to the mixing of electronic states of metal-based orbitals subsequently tailor the electron transfer cascade during the photoelectrochemical process. This breakthrough in chromophore-catalyst assemblies will spark interest in dye-sensitization with robust bulk systems for photoconversion applications.     

Determination of radiological hazard parameters and radioactivity concentrations in bauxite samples: the case of the Sutlegen Mine Region (Antalya,Turkey)

Journal of Radioanalytical and Nuclear Chemistry - Iron phosphate glasses with melting temperatures of?~?1300 °C were developed to immobilize spent nuclear fuels. The...