Effect of electrolytes on the surface behavior of rhamnolipids R1 and R2

The surface behavior of solutions of the rhamnolipids, R1 and R2, were investigated in the absence and presence of an electrolyte (NaCl) through surface tension measurements and optical microscopy at pH 6.8. The NaCl concentrations studied are 0.05, 0.5 and 1 M. Electrolytes directly affect the carboxylate groups of the rhamnolipids. The solution/air interface has a net negative charge due to the dissociated carboxylate ions at pH 6.8 with strong repulsive electrostatic forces between the rhamnolipid molecules. This negative charge is shielded by the Na⁺ ions in the electrical double layer in the presence of NaCl, causing the formation of a close-packed monolayer, and a decrease in CMC, and surface tension values. The maximum compaction is observed at 0.5 M NaCl concentrations for R1 and R2 monolayers, with the R1 monolayer more compact than R2. The larger spaces left below the hydrophobic tails of R1 with respect to that of R2, due to the missing second rhamnosyl groups are thought to be responsible for the higher compaction. The rigidity of both R1 and R2 monolayers increases with the electrolyte concentration. The rigidity of the R1 monolayer is greater than that of R2 at all NaCl concentrations due to the lower hydrophilic character of R1. The variation of CMC values as a function of NaCl concentration obtained from the surface tension measurements and critical packing parameter (CPP) calculations show that spherical micelles, bilayer and rod like micelles are formed in the rhamnolipid solutions as a function of the NaCl concentration. The results of optical microscopy supported these aggregation states indicating lamellar nematic liquid crystal, cubic lamellar and hexagonal liquid crystal phases in R1 and R2 solutions depending on the NaCl concentration.     

Structure of starch-bentonite gels

Mixed gels of starch and bentonite are investigated in the interval 0.056–0.089 of total solids/water ratio and 0-100% starch in the solids. The bentonite was a sodium calcium bentonite with a Na/Ca ratio of 1.76. In water it forms gels consisting of a network of band-type structures. Starch forms gels through hydrogen bonds between granules and/or amylose and amylopectin present on the external surfaces of granules and/or in fully stretched form. Mixed gels of bentonite and starch were obtained by adding corn starch granules to the already formed bentonite gels and heating the mixture above the Kofler gelatinization temperature. Amylose and amylopectin were adsorbed on strands of band-type structures of mont-morillonite lamellae. Starch gellation, e.g. diffusion of amylose out of the granule, was facilitated in the presence of bentonite. On the other hand, the presence of starch favored delamination of the montmorillonite particle into thinner lamellae. Maximum gelatinization and polymer adsorption were observed for gels with 20% starch and 80% bentonite. Montmorillonite networks formed the continuous phase for 0-80% starch. At higher starch concentrations, montmorillonite flakes were dispersed within the polymer network. Increase in the water content of the gels caused segregation of the bentonite and starch.     

Optical anisotropy and conformation of polyamidebenzimidazole in an organic solvent and in concentrated sulphuric acid

Flow birefringence, intrinsic orientation and intrinsic viscosities of polyamidebenzimidazole (PABI) and poly-meta-phenylene-isophthalamide (PPIP) molecules have been studied for a wide range of molecular weights. The optical and conformational properties of PABI molecules in dimethyl acetamide (DMAA) and concentrated sulphuric acid are compared. The conformation of PABI (kinetically rigid coil) is shown to be practically the same in both solvents. This fact indicates the practical absence of a significant role of protonization of molecules during formation of conformation of aromatic polyamides macromolecules in sulphuric acid. There is comparison of the coefficients G = [χ/g]RT/M[η]η₀ for PABI and PPIP molecules in sulphuric acid and DMAA. Values of G of 0.65 ± 0.05 for PABI and 0.30 ± 0.03 for PPIP correspond to those for rigid and flexible Gaussian coils respectively.     

Noniterative biexponential fluorescence lifetime imaging in the investigation of cellular metabolism by means of NAD(P)H autofluorescence.

The cofactors NADH and NADPH, hereafter NAD(P)H [NAD(P)= nicotinamide adenine dinucleotide (phosphate)], belong to the principal endogenous indicators of energetic cellular metabolism. Since the metabolic activity of cells is given by the ratio between the concentrations of free and protein-bound NAD(P)H, the development of autofluorescence techniques which accurately measure the modifications to this ratio is particularly significant. Hitherto the methods applied in the monitoring of cellular metabolism have provided either imprecise results, due to interference of the NAD(P)H signal by perturbing factors, or they have required a complicated internal calibration. We employ biexponential fluorescence lifetime imaging (FLIM) in order to discriminate between the free and protein-bound NAD(P)H without any previous calibration. Thus, we have obtained directly, and for the first time, a high-resolution map of cellular metabolism, that is, an image of the contribution of the protein-bound NAD(P)H to the cumulative NAD(P)H fluorescence signal. Moreover, we demonstrate that protein-NAD(P)H complexes characterised by different fluorescence lifetimes are not uniformly distributed all over the cell, as assumed until now, but are concentrated in certain cellular regions. The different fluorescence lifetimes indicate either different protein-NAD(P)H complexes or different bond strengths between NAD(P)H and the protein in these complexes. Since an important aspect in biological applications is to monitor the dynamics of the relevant processes (such as cellular metabolism), rapid dynamical techniques, for example, rapid biexponential fluorescence lifetime imaging, are needed. Furthermore, it is necessary to reduce the evaluation effort as much as possible. Most of the evaluation techniques in multiexponential FLIM are time-expensive iterative methods. The few exceptions are connected with a loss of information, for example, global analysis; or a loss in accuracy, for example, the rapid evaluation technique (RLD). We implement for the first time in FLIM a noniterative, nonrestrictive method originally developed by Prony for approximations of multiexponential decays. The accuracy of this method is verified in biexponential FLIM experiments in time-domain on mixtures of two chromophores both in homogenous and in heterogeneous media. The resulting fluorescence lifetimes agree (within error margins) with the lifetimes of the pure substances determined in monoexponential FLIM experiments. The rapidity of our evaluation method as compared to iterative pixel-by-pixel methods is evidenced by a reduction of the evaluation time by more than one order of magnitude. Furthermore, the applicability of this method for the biosciences is demonstrated in the investigation of cellular metabolism by means of NAD(P)H endogenous fluorescence.     

Furo- and thieno-fused 1,3-diazepine-4,6-diones

We report the first preparation of furo- and thieno-fused 1,3-diazepine-4,6-dione derivatives starting from ethyl 2-(2-methoxy-2-oxoethyl)-3-furancarboxylate and -thiophencarboxylate. The ester functionalities connected to the hetero-ring were converted regiospecifically into the desired amides. The ester groups attached to the methylene unit were converted into isocyanates via Curtius rearrangement. The ring-closure reaction was performed in the presence of lithium bis(trimethylsilyl)amide at room temperature to give furo- and thieno-fused diazepinone derivatives.     

Palladium(II) complexes bearing N‐alkylpiperidoimidazolin‐2‐ylidene derivatives: Effect of alkyl chain length of ligands on catalytic activity

A series of piperidoimidazolinium salts which differ in the chain lengths (butyl, octyl, dodecyl, octadecyl) and their Pd–N‐heterocyclic carbene complexes with pyridine were synthesized and characterized using elemental analysis and spectroscopic methods. The effects of these ligands on catalyst activation and the performance of the complexes were studied in Suzuki–Miyaura reactions of arylboronic acid with aryl chlorides. The complex with the ligand having the longest chain length was found to be most active. The results demonstrated that the length of the alkyl chain of the piperidoimidazolin‐2‐ylidene controlled the dispersion and composition of the nanoparticles and it affected the catalytic activity. The impact of alkyl chain length of piperidoimidazolin‐2‐ylidene on the Suzuki–Miyaura reactions of arylboronic acid with aryl halides was systematically investigated.     

Sonochemical synthesis and electrochemical characterization of α-nickel hydroxide: precursor effects

Sonochemical degradation of urea was employed to synthesize alpha-nickel hydroxide from different nickel salts. Utilization of ultrasound yielded products with properties significantly different than the products obtained by thermal degradation of urea. The effect of intercalating chloride, nitrate, acetate, and sulfate anions on morphology and electrochemical performance was studied. The sulfate-intercalated sample had the smallest interlayer spacing when obtained by the sonochemical method, contradicting all the previous thermal synthesis results. The specific capacitance trend also differed from the literature values, and the value for the sulfate-intercalated sample was larger than that of acetate- and nitrate-intercalated samples. Ultrasonic synthesis increased the specific capacitance of the sulfate-intercalated sample significantly. This sample was also the most reversible and had the highest charge efficiency.     

Synthesis of thio- and furan-fused heterocycles: furopyranone,furopyrrolone, and thienopyrrolone derivatives

We report herein the synthesis of a novel class of compounds, ethyl 4-oxo-4H-furo[3,2-c]pyran-6-yl carbonate, (7E)-7-[(dimethylamino)methylene]-4H-furo[3,2-c]pyran-4,6(7H)-dione, 5-oxo-N-phenyl-2,5-dihydro-4H-furo[3,2-b]pyrrole-4-carboxamide, and 5-oxo-N-phenyl-5,6-dihydro-4H-thieno[3,2-b]pyrrole-4-carboxamide starting from the corresponding acid derivatives. Intramolecular cyclization in the presence of thionyl chloride formed the target fused ring systems. Additional transformation was seen in the cyclization of furan-fused heterocycle. A mechanism was proposed based on experimental and computational findings.