苯并噻唑重氮氨基偶氮苯与汞（Ⅱ）的显色反应及其应用

报道了新试剂苯并噻唑重氮氨基偶氮苯的合成及其与汞（Ⅱ）的显色反应，在ＴｒｉｔｏｎＸ－１００存在下弱碱性介质中，试剂与汞形成２：１的橙红色络合物，最大吸收波长位于５２０ｎｍ处，表观摩尔吸光系数为１．５１×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１。汞量在０～１．２ｍｇ／Ｌ范围内遵守比尔定律，直接应用于废水中微量汞的测定，结果满意。     

Structural, magnetic properties and photoemission study of Ni-doped ZnO

Nickel-doped ZnO (Zn_1−xNi_xO) have been produced using rf magnetron sputtering. X-ray diffraction measurements revealed that nickel atoms were successfully incorporated into ZnO host matrix without forming any detectable secondary phase. Ni 2p core-level photoemission spectroscopy confirmed this result and suggested Ni has a chemical valence of 2+. According to the magnetization measurements, no ferromagnetic but paramagnetic behavior was found for Zn_0.86Ni_0.14O. We studied the electronic structure of Zn_0.86Ni_0.14O by valence-band photoemission spectroscopy. The spectra demonstrate a structure at ∼2 eV below the Fermi energy E_F, which is of Ni 3d origin. No emission was found at E_F, suggesting the insulating nature of the film.     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

2-巯基苯并咪唑保护的铜纳米团簇的制备及银离子检测

以2-巯基苯并咪唑为保护剂,聚乙烯吡咯烷酮为稳定剂,水合肼为还原剂,“一锅法”合成2-巯基苯并咪唑保护的,高稳定性、强荧光、大斯托克斯位移的铜纳米团簇(Cu NCs),并用于检测水样中的银离子含量。采用透射电子显微镜(TEM)和X射线光电子能谱(XPS)对铜纳米团簇的结构进行表征,通过荧光光谱和紫外可见光谱对其光学性能进行研究。研究表明:该铜纳米团簇的最大激发和发射波长分别为340和558 nm,在日光灯和紫外灯下分别为无色和橙色。Cu NCs具有较高的分散性,尺寸大小为2~3 nm。在最佳反应条件下,铜纳米团簇可以选择性地被银离子猝灭,且灵敏度高,线性范围为1~40μmol/L,检测限为0.5μmol/L。该方法用于检测实际水样(自来水、湖水)中银离子的浓度,结果令人满意,表明在环境监测中有非常高的应用价值。     

Asymptotic Behavior of a Stochastic Predator-prey Model with Beddington-DeAngelis Functional Response and L\'{e}vy Jumps

A stochastic two-prey-one-predator model with Beddington-DeAngelis functional response and L\''{e}vy jumps is proposed and investigated in this paper. First of all, we prove the existence and uniqueness of the global positive solution, and stochastic ultimate boundedness of the solution. Next, under a simple assumption, by using It\^{o} formula and other important inequalities, some sufficient conditions are established to ensure the extinction and persistence in the mean of the system. The results show that neither strong white noise nor L\''{e}vy noise is conducive to the persistence of the population. Finally, the theoretical results are verified by numerical simulations.     

对乙酰基偶氮胂两波长标准加入法同时测定铁和镍

ｐＨ５．５的ＨＡｃ－ＮａＡｃ绶冲介质中，铁和镍与对乙酰基偶氮胂形成最大吸收波长分别为６２０ｎｍ和６３０ｎｍ的有色配合物，其吸收光谱严重重叠。本文用两波长标准加入法，同时光度测定微量铁和镍。该法灵敏度高、选择性好、操作简便、应用于铝合金中铁、镍的同时测定．结果满意。     

Determination of levodopa by capillary electrophoresis with chemiluminescence detection

A rapid and simple method using capillary electrophoresis (CE) with chemiluminescence (CL) detection was developed for the determination of levodopa. This method was based on enhance effect of levodopa on the CL reaction between luminol and potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) in alkaline aqueous solution. CL detection employed a lab-built reaction flow cell and a photon counter. The optimized conditions for the CL detection were 1.0 × 10⁻⁵ M luminol added to the CE running buffer and 5.0 × 10⁻⁵ M K₃[Fe(CN)₆] in 0.6 M NaOH solution introduced postcolumn. Under the optimal conditions, a linear range from 5.0 × 10⁻⁸ to 2.5 × 10⁻⁶ M (r = 9991), and a detection limit of 2.0 × 10⁻⁸ M (signal/noise = 3) for levodopa were achieved. The precision (R.S.D.) on peak area (at 5.0 × 10⁻⁷ M of levodopa, n = 11) was 4.1%. The applicability of the method for the analysis of pharmaceutical and human plasma samples was examined.     

Detection of paracetamol by capillary electrophoresis with chemiluminescence detection

Indirect detection of paracetamol was accomplished using a capillary electrophoresis-chemiluminescence (CE-CL) detection system, which was based on its inhibitory effect on a luminol-potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) CL reaction. Paracetamol migrated in the separation capillary, where it mixed with luminol included in the running buffer. The separation capillary outlet was inserted into the reaction capillary to reach the detection window. A four-way plexiglass joint held the separation capillary and the reaction capillary in place. K₃[Fe(CN)₆] solution was siphoned into a tee and flowed down to the detection window. CL was observed at the tip of the separation capillary outlet. The CL reaction of K₃[Fe(CN)₆] oxidized luminol was employed to provide the high and constant background. Since paracetamol inhibits the CL reaction, an inverted paracetamol peak can be detected, and the degree of CL suppression is proportional to the paracetamol concentration. Maximum CL signal was observed with an electrophoretic buffer of 30 mM sodium borate (pH 9.4) containing 0.5 mM luminol and an oxidizer solution of 0.8 mM K₃[Fe(CN)₆] in 100 mM NaOH solution. Under the optimal conditions, a linear range from 6.6 × 10⁻¹⁰ to 6.6 × 10⁻⁸ M (r = 0.9999), and a detection limit of 5.6 × 10⁻¹⁰ M (signal-to-noise ratio = 3) for paracetamol were achieved. The relative standard deviation (R.S.D.) of the peak area for 5.0 × 10⁻⁹ M of paracetamol (n = 11) was 2.9%. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

Quantitation of agmatine by liquid chromatography with laser-induced fluorescence detection

A high performance liquid chromatography (HPLC) method is described for the determination of agmatine, an endogenous neuromodulator. The method involves pre-column derivatization of the sample with a fluorescent tagging reagent, 7-fluoro-4-nitrobenzoxadiazole (NBD-F). The resulting agmatine derivative is stable and can be readily extracted into ethyl acetate at pH 8.5. The extraction enhances the quantification of low level agmatine because it eliminates chromatographic peaks caused by endogenous amino acids. The HPLC separation is carried out on a C₈ reversed phase column and completed in less than 10 min. With laser-induced fluorescence (LIF) detection, the detection limit is 5×10⁻⁹ M agmatine. Method precision (coefficient of variation) is 5% for agmatine in human plasma at the sub-μM level. This method has been validated by determination of agmatine in biological samples including human plasma and rat brain and stomach tissues.