The high-temperature durability of Rh-free threeway catalysts used for automoble emission control

The high-temperature durability of cordierite honeycomb Rh-free three-way catalysts (TWC) containing additives has been studied by calcining catalysts at various temperatures in the interval of 600≈1100°C. The three-way performances of these catalysts were evaluated for the reaction of carbon monoxide(CO), hydrocarbon(HC) and nitrogen oxides(NOx) at given conditions by using a fixed bed reactor. The results show that after Rh-free TWC are thermally aged in air at 1100°C for 5h and 950°C for 104 h, the TWC still have better three-way activity compared with Rh-containing TWC.     

Ni-P/SiO_2催化剂晶化过程及其加氢活性研究

采用化学还原法制备了负载型Ni－P／SiO2非晶态合金催化剂．应用ICP、BET、氢氧滴定法、XRD、SEM、XPS研究了上述催化剂在高温晶化过程中的表面结构、表面形貌和表面电子态的变化。测定了Ni－P／SiO2非晶态合金晶化前后对其液相苯甲醛加氢反应催化活性和选择性,并讨论了非晶态合金催化剂晶化过程中结构变化对催化性能的影响．     

磺胺甲恶唑在二硫化钼纳米片修饰电极上的电化学行为

采用了研磨后超声和离心分离方法制备了二硫化钼纳米片,通过原子力显微镜(AFM)和扫描电子显微镜(SEM)对不同离心速度分离的二硫化钼纳米片进行了表征。使用循环伏安法(CV)和差分脉冲伏安法(DPV)在磺胺甲恶唑溶液中对二硫化钼纳米片修饰的玻碳电极进行了电化学行为研究。结果显示,磺胺甲恶唑在二硫化钼修饰电极的循环伏安图上有一对氧化还原峰。其峰电流值与扫描速度的平方根成正比,是扩散控制过程。DPV扫描结果显示,磺胺甲恶唑的峰电流与其浓度之间存在着明显的线性关系。研磨超声方法制备出的二硫化钼纳米片层材料在电极上能够加速电子的转移和传输,从而有效提高峰电流值,为进一步研制准确测定磺胺甲恶唑电化学传感器提供了一种可选择的材料和电化学分析方法。     

Synthesis of S-monofluoromethyl phosphorothioates from PⅤ-H compounds and PhSO2SCH2F

S-Monofluoromethyl phosphorothioates represent an important class of organofluorine compounds and are re ported here for the first time.A series of S-monofluoromethyl phosphorothioates are conveniently synthesized from different P^Ⅴ-H compounds and PhSO₂SCH₂F under mild conditions.The method is compatible with common functional groups and provides potential opportunities to synthesize new bioactive molecules for medicinal chemistry.     

Expanding the Toolbox of Metal–Phenolic Networks via Enzyme‐Mediated Assembly

Functional coatings are of considerable interest because of their fundamental implications for interfacial assembly and promise for numerous applications. Universally adherent materials have recently emerged as versatile functional coatings; however, such coatings are generally limited to catechol, (ortho‐diphenol)‐containing molecules, as building blocks. Here, we report a facile, biofriendly enzyme‐mediated strategy for assembling a wide range of molecules (e.g., 14 representative molecules in this study) that do not natively have catechol moieties, including small molecules, peptides, and proteins, on various surfaces, while preserving the molecule's inherent function, such as catalysis (≈80 % retention of enzymatic activity for trypsin). Assembly is achieved by in situ conversion of monophenols into catechols via tyrosinase, where films form on surfaces via covalent and coordination cross‐linking. The resulting coatings are robust, functional (e.g., in protective coatings, biological imaging, and enzymatic catalysis), and versatile for diverse secondary surface‐confined reactions (e.g., biomineralization, metal ion chelation, and N‐hydroxysuccinimide conjugation).     

蟹壳基氮/氧共掺杂多孔炭的原位制备及其超级电容器性能

采用废弃蟹壳为碳源,KOH为活化剂原位制备了氮/氧共掺杂多孔炭,并研究其作为电极材料在超级电容器中的应用。 固定蟹壳与KOH的质量比为5:3,考察了煅烧温度对所得炭材料产率、孔结构和氮氧含量的影响。 结果表明,蟹壳基炭材料的孔结构和氮/氧含量可通过改变煅烧温度调变。 随着煅烧温度从500 ℃上升至700 ℃,多孔炭的比表面积和孔体积逐渐增大,而氮/氧含量随温度升高则降低。 采用循环伏安和恒流充放电对所得材料的电化学性能进行测试。 结果表明,所得多孔炭的电化学性能取决于其孔结构与氮/氧表面性质的协同作用,其中煅烧温度为600 ℃所得的多孔炭比表面积为612 m²/g,氮和氧含量分别为3.53%和32.8%,在50 mA/g的电流密度下比电容达到310 F/g,循环1000次比电容仍然保持95%以上,展现出良好的电化学性能。     

等离子体诊断中的Abel逆变换

本文描述了两种最常用的Abel逆变换方法,并用这两种方法对不同类型的分布曲线在计算机上进行了模拟计算;研究了输入数据的随机误差、诊断设备的系统误差以及采样点的数目等对Ab-el逆变换精度的影响,同时对这两种方法进行了比较。     

开口谐振环阵列在太赫兹波段的谐振特性实验研究

实验制备了单元尺寸在微米量级的开口谐振环周期阵列样品,测试了其在0.1~2 THz频段的散射系数,验证了不同极化方向的垂直入射可产生单独的电谐振或同时产生磁谐振的传输特性,验证了材料电导率对样品的谐振频率的影响。结合仿真计算结果,得到了等效的负介电常数和负磁导率随频率的变化关系,及其电、磁谐振频率与谐振环单元尺寸增大倍数k的关系曲线。实验和仿真均表明,样品的电谐振频率与1/k线性相关,而磁谐振频率与1/k成正比关系。     

傅里叶自重卷积解谱技术中一种新的变迹函数

傅里叶自重卷积解谱技术可以有效地提高实验谱的分辨率,然而解谱后的信噪比明显下降。本文提出一种新的变迹函数(动态变迹函数),它可以在提高分辨率的同时使信噪比基本保持不变,用它来处理由软X射线弯品谱仪得到的Fe的Lα和Lβ实验谱线获得了十分满意的结果,解谱后得到了Lα和Lβ之间的许多短波伴线,跟理论计算值符合很符合。     

Role of support-nanoalloy interactions in the atomic-scale structural and chemical ordering for tuning catalytic sites

The understanding of the atomic-scale structural and chemical ordering in supported nanosized alloy particles is fundamental for achieving active catalysts by design. This report shows how such knowledge can be obtained by a combination of techniques including X-ray photoelectron spectroscopy and synchrotron radiation based X-ray fine structure absorption spectroscopy and high-energy X-ray diffraction coupled to atomic pair distribution function analysis, and how the support-nanoalloy interaction influences the catalytic activity of ternary nanoalloy (platinum-nickel-cobalt) particles on three different supports: carbon, silica, and titania. The reaction of carbon monoxide with oxygen is employed as a probe to the catalytic activity. The thermochemical processing of this ternary composition, in combination with the different support materials, is demonstrated to be capable of fine-tuning the catalytic activity and stability. The support-nanoalloy interaction is shown to influence structural and chemical ordering in the nanoparticles, leading to support-tunable active sites on the nanoalloys for oxygen activation in the catalytic oxidation of carbon monoxide. A nickel/cobalt-tuned catalytic site on the surface of nanoalloy is revealed for oxygen activation, which differs from the traditional oxygen-activation sites known for oxide-supported noble metal catalysts. The discovery of such support-nanoalloy interaction-enabled oxygen-activation sites introduces a very promising strategy for designing active catalysts in heterogeneous catalysis.