A study of structural, compositional and optical properties of spray-deposited non-stoichiometric (Zn,Fe)S thin films

Non-stoichiometric ternary chalcogenides (Zn,Fe)S were prepared in the film form by pyrolytic spray deposition technique, using air/nitrogen as the carrier gas. The precursor solution comprised of ZnCl₂, FeCl₂ and thiourea. The depositions were carried out under optimum conditions of experimental parameters viz. carrier gas (air/nitrogen) flow rate, concentration of precursor constituents, nozzle substrate distance and temperature of quartz substrate. The deposited thin films were later sintered in argon at 1073 K for 120 min.The structural, compositional and optical properties of the sintered thin films were studied. X-ray diffraction studies of the thin films indicated the presence of (Zn,Fe)S solid solution with prominent cubic sphalerite phase while surface morphology as determined by scanning electron microscopy (SEM) revealed a granular structure.The chemical composition of the resulting thin films as analyzed by energy dispersive X-ray analysis (EDAX) reflected the composition of the precursor solutions from which the depositions were carried out with Fe at% values ranging from 0.4 up to 33.SEM micrographs of thin films reveal that the grain sizes of the thin films prepared using air as carrier gas and N₂ as carrier gas are in the vicinity of 300 and 150 nm, respectively.The diffuse transmittance measurements for thin films, as a function of wavelength reveal the dependence of direct optical band gap on Fe content and type of phase.     

Chemically controlled pattern formation in phase-separating materials

Summary The role of chemical reactions in the selection of patterns in phase-separating mixtures is presented. Linearized theory and computer simulation show that the initial long-wavelength instability characteristic of spinodal decomposition is suppressed by chemical reactions, which restrict domain growth to intermediate length scales even in the late stages of phase separation. Our findings suggest that chemical reactions may provide a novel way to stabilize and tune the steady-state morphology of phase-separating materials. Paper presented at the I International Conference on Scaling Concepts and Complex Fluids, Copanello, Italy, July 4–8, 1994.     

Contemplating Criteria for Science Education Reform: The Case of the Olympia School District

Proposals for current reform in science education elaborate national standards and a plethora of state-level interpretations commonly labeled as curriculum or learning frameworks. The purpose of this case study was to examine the dynamics of the science curriculum reform process in one of the first school districts to use the Georgia Framework for Learning Mathematics and Science as a basis for their reform initiative. The paper describes the ways in which members of the Olympia School District's Science Curriculum Committee participated in the science curriculum reform process, as well as their personal beliefs about the criteria needed for reform to take place. The results highlight the nature of metaphors guiding reform efforts; the influence of social, historical, economic, and political forces on the reform process; the use of local and professional languages as discourses for communicating about reform; and the complex power relations that influence the micropolitics of reform in the Olympia School District. This study has important implications for other teachers and school districts engaged in standards-based science curriculum reform. It points to the need for reform to include reflection and analysis of the role of teachers in the reform process and consideration of the purpose of science education reform in society.     

Role of Cell Surface Lipopolysaccharides in Escherichia coli K12 adhesion and transport

The influence of bacterial surface lipopolysaccharides (LPS) on cell transport and adhesion has been examined by use of three mutants of Escherichia coli K12 with well-characterized LPS of different lengths and molecular composition. Two experimental techniques, a packed-bed column and a radial stagnation point flow system, were employed to investigate bacterial adhesion kinetics onto quartz surfaces over a wide range of solution ionic strengths. Although the two systems capture distinct deposition (adhesion) mechanisms because of their different hydrodynamics, similar deposition kinetics trends were observed for each bacterial strain. Bacterial deposition rates were directly related to the electrostatic double layer interaction between the bacteria and quartz surfaces, in qualitative agreement with classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. However, DLVO theory does not fully explain the deposition behavior for the bacterial strain with the lengthy, uncharged O-antigen portion of the LPS. Neither the length nor the charge characteristics of the LPS molecule directly correlated to deposition kinetics, suggesting a complex combination of cell surface charge heterogeneity and LPS composition controls the bacterial adhesive characteristics. It is further suggested that bacterial deposition behavior is determined by the combined influence of DLVO interactions, LPS-associated chemical interactions, and the hydrodynamics of the deposition system.     

Microwave‐assisted nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐lH‐pyrazolo[ 1,2‐a]pyrazol‐4‐ylium‐3‐olate to α‐phenylmalonamides

Three α‐phenylmalonamides have been prepared by the selective nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐1H‐pyrazolo[1,2‐a]pyrazol‐4‐ylium‐3‐olate in solventless microwave syntheses. The three weak nucleophiles employed were aniline, p‐chloroaniline and m‐toluidine. The α‐phenylmalonamides of these three aniline derivatives could not be prepared using the previously reported solvent syntheses via 3‐oxopyrazolo[1,2‐a]pyrazol‐8‐ylium‐1‐olates. All products were characterised using, infrared spectroscopy, ¹H nmr and electrospray mass spectrometry. The single crystal X‐ray structures of the starting pyrazolo‐[1,2‐a]pyrazole and α‐phenylmalon‐m‐toluidide are also reported.     

Evaluation of a complete HPLC solvent optimization system involving piece-wise quadratic modelling

Summary Interpretive methods are accepted to give the best possible results for selectivity optimization in HPLC. However the methods are very complex, and most work so far has been detailed academic studies. This paper describes an evaluation of a complete integrated system incorporating peak labelling, modelling of retention behaviour and calculation of response surfaces, with particular emphasis on the retention modelling. The peak labelling section has been discussed previously.A piece-wise quadratic function is investigated for the modelling of retention times across an isoeluotropic plane to effect selectivity optimization in HPLC. This requires 10 data-points on the isoeluotropic plane. The predicted global optimum and local optima are evaluated by comparison of calculated and experimental retention data, for a nine component sample. Seven interstitial points, distributed across the whole plane between the data-points, are similarly evaluated for a related sample. The typical error (in retention time) is less than 2%, often 1%, and the maximum error is 4.2%. At the global optimum the error was found be less than 1.3% for all 9 peaks.     

Determination of the total nitrogen content of hard, semihard, and processed cheese by the Kjeldahl method: collaborative study

The objective of this collaborative study was to determine interlaboratory performance statistics for a modified and optimized version of AOAC Method 920.123 for the determination of the total nitrogen content of hard, semihard, and processed cheese by Kjeldahl analysis. Details included addressing the issues of material homogeneity, test portion size (1 g), quantitative transfer (weighing on to filter paper), ensuring system suitability (nitrogen recoveries), and using AOAC Method 991.20 as the basis for nitrogen analysis. Fifteen laboratories tested 18 pairs of blind duplicate cheese materials with a crude protein content between 18 and 36%. Materials represented hard, semihard, and processed commercial cheeses with a wide range of composition. Statistical performance parameters expressed as crude protein (nitrogen x 6.38), g/100 g, with invalid and outlier data removed were mean = 26.461, repeatability standard deviation (Sr) 0.111, reproducibility standard deviation (S(R)) = 0.153, repeatability relative standard deviation (RSDr) = 0.42%, reproducibility relative standard deviation (RSDR) = 0.58%, repeatability (r) = 0.312, and reproducibility (R) = 0.428. The interlaboratory study results were acceptable and comparable to those for the milk Kjeldahl nitrogen method on a relative nitrogen basis. The Study Directors recommend that this modified method for the determination of total nitrogen in hard, semihard, and processed cheese by Kjeldahl analysis be adopted First Action as an improved method to replace Method 920.123.