Temperature dependent electrical conductivity of polyaniline/Y2O3 composites

Composites of polyaniline with yttrium oxide (Y₂O₃) nanoparticles have been prepared by chemical polymerizations method by increasing the weight percentage of yttrium oxide. X-Ray diffraction (XRD) and Fourier Transform Infrared Spectra (FTIR) were used to characterize the composites. XRD and FTIR pattern indicate that Polyaniline (PANI) is intercalated into the layers of Y₂O₃ nanoparticles successfully by in situ polymerization and therefore the degree of crystallinity increases due to crystalline of yttrium oxide nanoparticles. The scanning electron micrographs (SEM) also confirm the formation of dual phase of platelet as well as of flaky structure in PANI-Y₂O₃. Temperature dependant DC conductivity showed three dimensional variable ranges hopping (3D VRH) model. Activation energy, density of states and hopping length are calculated and found to be influenced by intercalating PANI into the layers of Y₂O₃ clay.     

Magnetic,Electrical and Thermal Studies of Polypyrrole-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites

This research paper comprises of the synthesis of polypyrrole (PPy)-Fe₂O₃ nanocomposites by employing the in situ chemical oxidative polymerization method. The concentration of the filler material was adjusted between 10–50 wt % of PPy. The synthesized nanocomposites were characterized by using X-ray diffraction (XRD). Magnetic analysis and DC electrical conductivity of the samples were carried out using vibrating sample magnetometer (VSM) and two probe DC conductivity method, point towards magnetically active and electrically conductive samples. The magnetic parameters under applied magnetic field demonstrated that the values of coercivity (H _c ), saturation magnetization (M _s ) and remanence (M _r ) can be tailored by carefully controlling the amount of dopant material into the nanocomposites indicating their suitability for controllable switching devices and microwave absorption applications. The DC electrical conductivity showed an increase up to 20 wt % of filler material and thereafter a decrease in the conductivity of nanocomposites with increase in filler content is observed. Thermogravimetric analysis (TGA) showed an increase in thermal stability with an increase in ferrite content in nanocomposites.     

Morphological,thermal, and conductivity studies of poly(methyl methacrylate)/polyaniline dodecylbenzenesulfonate blends

Soluble in organic solvent polyaniline (PANI) was prepared using DBSA as a functional dopant. Miscibility was maximized for PMMA with hydroquinone. Transmission electron micrographs showed lowest level of phase separation. Thermal studies by differential scanning calorimetry show some peak shifts which indicate the miscibility of two polymers. The formations of new bonds are also confirmed by Fourier transformation infrared spectroscopy. Electroconductivity increased with increase of content of doped PAN1, showing percolation threshold at 3 wt %.     

Controlled coupling of a single nitrogen-vacancy center to a silver nanowire

We report on the controlled coupling of a single nitrogen-vacancy (NV) center to a surface plasmon mode propagating along a chemically grown silver nanowire (NW). We locate and optically characterize a single NV center in a uniform dielectric environment before we controllably position this emitter in the close proximity of the NW. We are thus able to control the coupling of this particular emitter to the NW and directly compare the photon emission properties before and after the coupling. The excitation of single plasmonic modes is witnessed and a total rate enhancement by a factor of up to 4.6 is demonstrated.     

Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Tannery and Surgical Industrial Wastewater by Sorghum

We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.45 GHz), GA (5 and 10 mM), and wastewater (0, 25, 50, and 100). Growth and photosynthetic pigments were significantly decreased in plants only treated with various concentrations of WW. GA significantly improved the plant growth characteristics both in MR-treated and -untreated plants compared with respective controls. HMs stress increased electrolyte leakage (EL), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) content; however, the GA chelation significantly improved the antioxidant enzymes activities such as ascorbate oxidase (APX), superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) both in MR-treated and -untreated plants under WW stress compared with respective controls. The results suggested that the MR-treated plants accumulate higher levels of HMs under GA addition in comparison to the WW-only-treated and MR-untreated plants. The maximum increase in Cd accumulation was observed in the range of 14–629% in the roots, 15–2964% in the stems, and 26–4020% in the leaves; the accumulation of Cu was 18–2757% in the roots, 15–4506% in the stems, and 23–4605% in the leaves; and the accumulation of Pb was 13–4122% in the roots, 21–3588% in the stems, and 21–4990% in the leaves under 10 mM GA and MR-treated plants. These findings confirmed that MR-treated sorghum plants had a higher capacity for HMs uptake under GA and could be used as a potential candidate for wastewater treatment.     

Polyanilme-montmorilltonite (PANl-MMT) nanocomposites: Mechanochemical synthesis,structure, thermostability and electrical properties

Polyaniline (PANI)-montmorillonite (MMT) nanocomposites were prepared by direct intercalation of aniline molecules into MMT galleries, followed by in situ mechanochemical polymerization under solvent free conditions. X-rays diffraction, Fourier Transform Infra Red analyses and UV-vis spectroscopy confirmed the successful synthesis of polyaniline chains between the MMT nano-interlayers. On increasing the amount of MMT basal spacing decreased gradually, suggesting less intercalation with decreasing amount of aniline. Scanning electron micrographs demonstrated strong differences between the morphologies of PANI-MMT nanocomposites and those of pure MMT and PANI. DC conductivity was measured in the temperature range from 145 K to 303 K using four probe methods. Temperature dependent DC conductivity of PANI and all the PANI-MMT composites followed 3 dimensional variable range hopping (3D VRH) model. Frequency dependent AC conductivity (σ_AC), dielectric constant (ɛ′) and loss factor (ɛ″) have been measured in the frequency range 10²–10⁶. All these measured quantities; σ_AC, ɛ′ and ɛ″ decreased with the increase in MMT content in the composites at all frequencies. The frequency dependence of σ_AC displayed a low frequency region below 10⁴ Hz with almost constant conductivity, while above this frequency a rapid rise in σ_AC was observed with a power law of frequency dependence with an exponent equal to 0.7. Both real and imaginary parts of the permittivity exhibited a low frequency dispersion which has been attributed to hopping of polarons and bipolarons in PANI and its composites. The thermal stability was checked by thermogravimetric analysis (TGA) and was found to be enhanced due to addition of MMT in the PANI.     

Effect of hydroquinone on the electrical properties of dodecylbenzene sulfonic acid doped polypyrrole/aluminum Schottky junction

Electrical properties of Schottky barrier diode fabricated using Aluminum for Schottky contact and indium tin oxide for ohmic contact and containing polypyrrole doped with dodecylbenzene sulfonic acid in the presence and in the absence of a plasticizing agent hydroquinone were studied. Various parameters, e.g. saturation current, ideality factor, built in voltage; carrier concentration and barrier height have been calculated and found to be affected by the presence of hydroquinone in the doped polymer. The electrical behavior of the systems was found to be in a good agreement with the thermionic emission model for the Schottky barrier devices. The interaction of the doped polypyrrole with hydroquinone was explained in terms of change in the barrier height and in the carrier concentration of the diodes.     

Raman spectroscopy of conducting poly (methyl methacrylate)/polyaniline dodecylbenzenesulfonate blends

Polyaniline soluble in organic solvents was prepared using dodecylbenzenesulphonic acid (DBSA) as functional dopant. The solubility parameter was calculated and the most suitable solvent chloroform was checked for the solubility and the most compatible polymer PMMA was selected for blending. Miscibility was maximized with 1% by weight of hydroquinone. Blending of doped polyaniline with dodecylbenzenesulphonic acid (PAni.DBSA) in poly (methyl methacrylate) (PMMA) was explained by a change in the conformation of the polymeric chains leading to an increase in the conductivity. The electrical conductivity increased as the weight percent of PAni.DBSA increased, showing a percolation threshold as low as 3.0% by weight and the highest conductivity was achieved at 20% by wt of PAni.DBSA. Scanning electron micrographs showed lowest level of phase separation. Raman spectroscopy is used to characterize the blending process of two polymers aiming to understand the transformations in different types of charged segments. Raman results give complementary data about the blending process showing that together with the structural change of the polymeric chains, there is also a chemical transformation of these polymers. Analysis of Raman spectra was done investigating the relative intensities of the bands at 574 cm⁻¹ and 607 cm⁻¹. A relationship between conductivity and Raman was also proposed. Copyright © 2009 John Wiley & Sons, Ltd.