Iron speciation by solid phase extraction and flame atomic absorption spectrometry using N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane

A new Schiff base, N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane, has been synthesized for the very sensitive determination of iron(III) and iron(II) in natural water samples. It enabled a very selective and rapid method for iron determination to be developed. The method has also been applied to total iron determination in sediment samples. In the preconcentration system, the Schiff base reagent is mixed with the samples and chelates containing iron(III). The complexes are then adsorbed on silica gel within a column system. Elution of the adsorbed chelate from the silica gel was performed with a small volume of acetone containing 2.5% nitric acid. The iron is measured off-line by flame atomic absorption spectrometry. The method can be applied to the preconcentration, separation and speciation of iron. The effects of parameters such as pH, sample flow rate, eluent flow rate, foreign ions and ligand concentration have been investigated. The effect of humic acid that can produce complexes with metal ions in natural systems has also been investigated. The results obtained indicate that the method is not affected by the presence of up to 10 ppm humic acid, which would be a very high concentration to be present in natural systems. The solid phase extraction method developed has been applied to the determination of iron in both natural water samples and sediment samples. The LOD was found to be 0.17 mg L⁻¹ when no preconcentration was used, although preconcentration factors of 100 could be achieved. The recovery values for spiked samples were between 100 and 104%. The results were compared statistically with those from the standard 1,10 phenanthroline method used for iron speciation in water systems. A Student’s t-test indicated no significant difference between the two methods. In addition, this method was applied to the analysis of a certified sediment sample, LGC 6156. Generally, a 10-fold preconcentration factor was required for the analysis of natural water samples.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Theoretical analysis of frontier orbitals,electronic transitions,and global reactivity descriptors of M(CO)4L2 type metal carbonyl complexes: a DFT/TDDFT study

Structural Chemistry - Metal carbonyl complexes, which have been known as effective catalysts since early days, find use in many fields both directly and indirectly. Although the use of metal...     

Application of fuzzy optimization to a supply chain network design: A case study of an edible vegetable oils manufacturer

This study applies fuzzy sets to integrate the supply chain network of an edible vegetable oils manufacturer. The proposed fuzzy multi-objective linear programming model attempts to simultaneously minimize the total transportation costs. The first part of the total transportation costs is between suppliers and silos; and rest one is between manufacturer and warehouses. The approach incorporates all operating realities and actual flow patterns at production/distribution network with reference to demands of warehouses, capacities of tin and pet packaging lines. The model has been formulated as a multi objective linear programming model where data are modeled by triangular fuzzy numbers. Finally, the developed fuzzy model is applied for the case study, compiled the results and discussed.     

Use of tetrahydropyrimidinium salts for highly efficient palladium-catalyzed cross-coupling reactions of aryl bromides and chlorides

New, sterically demanding 1,3-dialkyl-3,4,5,6-tetrahydropyrimidinium salts (2) as NHC precursors have been synthesized and characterized. These salts, in combination with palladium acetate, provided active catalysts for the cross-coupling of aryl chlorides and bromides under mild conditions. The catalytic system was applied to the Heck, Suzuki and benzaldehyde (Kumada) coupling reactions. Catalyst activity was found to be influenced by the presence of a methoxy group on the ring of the p-position of benzyl substituent of the ligand precursor.     

Butylene linked palladium N-heterocyclic carbene complexes: Synthesis and catalytic properties

New bis(NHC)-Pd complexes were synthesized and characterized by elemental analysis, ¹H NMR, ¹³C NMR, and IR spectroscopy. The reaction of Pd(OAc)₂ and bis(benzimidazolium) salts in DMSO gave the monomeric palladium complex in which the N-heterocyclic carbene was bound to the metal centre. The crystal and molecular structure of the cis-dibromo{1,1′-di[2,3,4,5,6-pentamethylbenzyl]-3,3′-butylenedibenzimidazol-2,2′-diylidene}-palladium(II) complex was determined by single-crystal X-ray diffraction. The activity of the Pd(II) complexes in the direct arylation of benzothiazole with arylbromides was investigated. A preliminary catalytic study showed that these bis(NHC)-Pd complexes were highly active in the direct arylation of benzothiazole with arylbromides.     

Preparation and properties of a new solid state borate ion selective electrode and its application

A new borate ion selective electrode using solid salts of Ag₃BO₃, Ag₂S and Cu₂S has been developed. Detailed information is provided concerning the composition, working pH and conditioning of the electrode. An analytically useful potential change occurred from 1 × 10⁻⁶ to 1 × 10⁻¹ M borate ion. The slope of the linear portion was 31 ± 2 mV/10-fold changes in borate concentration. The measurements were made at constant ionic strength (0.1 M NaNO₃) and at room temperature. The effect of Cl⁻, Br⁻, NO₃⁻, SO⁼₄, H₂PO₄⁻ anions and K⁺, Na⁺, Cu²⁺, Ag⁺, Ca²⁺ cations on borate response is evaluated and it was found that only Ag⁺ had a small interference effect. The lifetime of the electrode was more than two years, when used at least 4-5 times a day, and the response time was about 20-30 s. Borate content in waste water of borax factory, tap water of a town situated near to the borax factory and city tap water far from these mines were also determined. The validation was made with differential pulse polarography for the same water sample, and high consistency was obtained.     

Eta6-mesityl,eta1-imidazolinylidene-carbene-ruthenium(II) complexes: catalytic activity of their allenylidene derivatives in alkene metathesis and cycloisomerisation reactions

The reaction of electron-rich carbene-precursor olefins containing two imidazolinylidene moieties [(2,4,6-Me(3)C(6)H(2)CH(2))NCH(2)CH(2)N(R)Cdbond;](2) (2a: R=CH(2)CH(2)OMe, 2 b R=CH(2)Mes), bearing at least one 2,4,6-trimethylbenzyl (R=CH(2)Mes) group on the nitrogen atom, with [RuCl(2)(arene)](2) (arene=p-cymene, hexamethylbenzene) selectively leads to two types of complexes. The cleavage of the chloride bridges occurs first to yield the expected (carbene) (arene)ruthenium(II) complex 3. Then a further arene displacement reaction takes place to give the chelated eta(6)-mesityl,eta(1)-carbene-ruthenium complexes 4 and 5. An analogous eta(6)-arene,eta(1)-carbene complex with a benzimidazole frame 6 was isolated from an in situ reaction between [RuCl(2)(p-cymene)](2), the corresponding benzimidazolium salt and cesium carbonate. On heating, the RuCl(2)(imidazolinylidene) (p-cymene) complex 8, with p-methoxybenzyl pendent groups attached to the N atoms, leads to intramolecular p-cymene displacement and to the chelated eta(6)-arene,eta(1)-carbene complex 9. On reaction with AgOTf and the propargylic alcohol HCtbond;CCPh(2)OH, compounds 4-6 were transformed into the corresponding ruthenium allenylidene intermediates (4-->10, 5-->11, 6-->12). The in situ generated intermediates 10-12 were found to be active and selective catalysts for ring-closing metathesis (RCM) or cycloisomerisation reactions depending on the nature of the 1,6-dienes. Two complexes [RuCl(2)[eta(1)-CN(CH(2)C(6)H(2)Me(3)-2,4,6)CH(2)CH(2)N- (CH(2)CH(2)OMe)](C(6)Me(6))] 3 with a monodentate carbene ligand and [RuCl(2)[eta(1)-CN[CH(2)(eta(6)-C(6)H(2)Me(3)-2,4,6)]CH(2)CH(2)N-(CH(2)C(6)H(2)Me(3)-2,4,6)]] 5 with a chelating carbene-arene ligand were characterised by X-ray crystallography.