Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes

A series of sulfonated poly(aryl ether ketone)s (SPAEKs) were prepared by aromatic nucleophilic polycondensation of 2,6‐dihydroxynaphthalene with 5,5′‐carbonyl‐bis(2‐fluorobenzenesulfonate) and 4,4′‐difluorobenzophenone. The structure and degree of sulfonation (DS) of the SPAEKs were characterized using ¹H NMR spectroscopy. The experimentally observed DS values were close to the expected values derived from the starting material ratios. The thermal stabilities of the SPAEKs were characterized by thermogravimetric analysis, which showed that in acid and sodium salt forms they were thermally stable in air up to about 240 and 380 °C, respectively. Transparent membranes cast from the directly polymerized SPAEKs exhibited good mechanical properties in both dry and hydrated states. The dependence of water uptake and of membrane swelling on the DS at different temperatures was studied. SPAEK membranes with a DS from 0.72 to 1.60 maintained adequate mechanical properties after immersion in water at 80 °C for 24 h. The proton conductivity of SPAEK membranes with different degrees of sulfonation was measured as a function of temperature. The proton conductivity of the SPAEK films increased with increased DS, and the highest room temperature conductivity (4.2 × 10^?2 S/cm) was recorded for a SPAEK membrane with a DS of 1.60, which further increased to 1.1 × 10^?1 S/cm at 80 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2866–2876, 2004     

Discrete and Continuous Time Modulated Random Walks with Heavy-Tailed Increments

We consider a modulated process S which, conditional on a background process X, has independent increments. Assuming that S drifts to −∞ and that its increments (jumps) are heavy-tailed (in a sense made precise in the paper), we exhibit natural conditions under which the asymptotics of the tail distribution of the overall maximum of S can be computed. We present results in discrete and in continuous time. In particular, in the absence of modulation, the process S in continuous time reduces to a Lévy process with heavy-tailed Lévy measure. A central point of the paper is that we make full use of the so-called “principle of a single big jump” in order to obtain both upper and lower bounds. Thus, the proofs are entirely probabilistic. The paper is motivated by queueing and Lévy stochastic networks.     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Theoretical analysis of singlet and triplet excited states of nickel porphyrins

Local density and generalized gradient approximation time-dependent density functional methods have been used for calculation of the singlet and triplet excited states of nickel-porphine, Ni-tetraphenyloporphine, and Ni-octaethyloporphyrine. Special attention is paid to metal-ligand transitions and d-d transitions. It is shown that the lowest exited singlet states of the three compounds can be described as a transfer of an electron from the porphine ring to the d(x2-y2) orbital of the nickel atom. On the other hand, the lowest excited triplet state arises from promotion of an electron between two nickel d orbitals, an occupied d(z2) and an empty d(x2-y2). It is proposed that a rapid quenching of the excited singlet states is due to an ultrafast intersystem crossing between 1Eg)and 3Eg or 3B1g states.     

Boron trifluoride-methanol complex—mild and powerful reagent for deprotection of labile acetylated amines

A set of amino-group possessing cyanine dyes is obtained from their N-acetyl derivatives via deprotection with boron trifluoride-methanol complex in good yields.     

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

A series of fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) were synthesized via aromatic nucleophilic substitution polymerization. The sulfonation content (SC) was controlled by the feed ratios of sulfonated and nonsulfonated monomers. Flexible and strong membranes in the sulfonic acid form were obtained from cast membranes in the sodium salt forms by treatment with acid. The thermal properties, water uptake, swelling ratio, water state, oxidative stability, proton conductivity and methanol permeability were investigated. All the polymers had proton conductivities greater than 1 × 10⁻² S/cm at room temperature, and the conductivity values of m-SPFEEKK-80 and p-SPFEEKK-80 were up to 1.86 × 10⁻¹ and 1.78 × 10⁻¹ S/cm at 100 °C. This series of polymers also possessed good dimensional stability in water and low methanol crossover.     

New insights into the transition pathway from nonspecific to specific complex of DNA with Escherichia coli integration host factor

To elucidate the nature of the transition-state ensemble along the reaction pathway from a nonspecific protein-DNA complex to the specific complex, we have carried out measurements of DNA bending/unbending dynamics on a cognate DNA substrate in complex with integration host factor (IHF), an architectural protein from E. coli that bends its cognate site by approximately 180 degrees . We use a laser temperature jump to perturb the IHF-DNA complex and monitor the relaxation kinetics with time-resolved FRET measurements on DNA substrates end-labeled with a FRET pair. Previously, we showed that spontaneous bending/kinking of DNA, from thermal disruption of base-pairing/-stacking interactions, may be the rate-limiting step in the formation of the specific complex (Kuznetsov, S. V.; Sugimura, S.; Vivas, P.; Crothers, D. M.; Ansari, A. Proc. Natl. Acad. Sci. USA 2006, 103, 18515). Here, we probe the effect of varying [KCl], which affects the stability of the complex, on this rate-limiting step. We find that below approximately 250 mM KCl, the observed relaxation kinetics are from the unimolecular bending/unbending of DNA, and the relaxation rate kr is independent of [KCl]. Above approximately 300 mM KCl, dissociation of the IHF-DNA complex becomes significant, and the observed relaxation process includes contributions from the association/dissociation step, with kr decreasing with increasing [KCl]. The DNA bending step occurs with a positive activation enthalpy, despite the large negative enthalpy change reported for the specific IHF-DNA complex (Holbrook, J. A.; Tsodikov, O. V.; Saecker, R. M.; Record, M. T., Jr. J. Mol. Biol. 2001, 310, 379). Our conclusion from these studies is that in the uphill climb to the transition state, the DNA is kinked, but with no release of ions, as indicated by the salt-independent behavior of k(r) at low [KCl]. Any release of ions in the unimolecular process, together with conformational changes in the protein-DNA complex that facilitate favorable interactions and that contribute to the negative enthalpy change, must occur as the system leaves the transition state, downhill to the final complex.     

Oligothiophene catenanes and knots. Part II. Mono and dications. A theoretical study

Mono- and dications of catenanes and knots containing 16, 22, and 28 thiophene units have been studied at the BHandHLYP/3-21G* level of theory. The polaron localization and relaxation energies of monoionized molecules increase with dihedral angle between thiophene fragments, being higher for catenanes and knots compared to linear oligomers. Monoionization of catenanes results in the polaron localization at one macrocycle leaving another one intact. In all diionized oligomers, polaron pairs were found to be more stable than corresponding bipolarons. The energy difference between bipolaron and polaron pairs increases with the number of repeating units in oligomers for all studied molecular architectures. Singlet polaron pairs are more stable than triplet ones. The energy difference between triplet and singlet states does not exceed 7-8 kcal/mol and decreases with the number of thiophene units in oligomers. Two different singlet minima were found for diionized catenanes. In the first one (the most stable), each macrocycle loses one electron, and in the other one, the polaron pairs are located at one macrocycle, leaving another intact. The energy difference between two minima decreases with the number of repeating units in catenanes.     

Fast spatially localised electrooptical mode in vertically aligned nematic LCs with negative dielectric anisotropy

ABSTRACT

Electro-optical switching and the liquid crystal (LC) director distribution are studied in spatially periodic electric field for vertically aligned LC with negative dielectric anisotropy. Two electro-optical switching modes characterised by different switching times are observed. These modes are well distinguished optically by choosing proper geometry for the polarisers axes orientation. One of these modes is significantly faster as compared to the other. The fast switching is explained in terms of localised near-to-surface director reorientation. The 3D-numerical simulation shows very good agreement with the experiment: it points out the existence of the disclination lines and field-stabilised walls responsible for the localised director field switching and its relaxation. Possibilities of enhancing the fast mode for high-speed light modulators are discussed.