Synthesis and characterization of new polyamides derived from di(4-cyanophenyl)isosorbide

New optically active polyamides were synthesized according to two ways: using a microwave-assisted polycondensation of an optically active isosorbide-derived diacylchloride with different aromatic diamines in NMP and using interfacial polymerization from an isosorbide-derived diamine with different diacylchlorides. The polymers are obtained with inherent viscosities in the range from 0.11 to 1.05 dL/g. The DSC and TGA measurements clearly demonstrate the high thermal stability of these polymers when considering the range of the melting points from 200 °C to 300 °C and the absence of decomposition till 350 °C.     

Highly Luminescent Colloidal Eu3+‐Doped KZnF3 Nanoparticles for the Selective and Sensitive Detection of CuII Ions

This article describes a green synthetic approach to prepare water dispersible perovskite‐type Eu³⁺‐doped KZnF₃ nanoparticles, carried out using environmentally friendly microwave irradiation at low temperature (85 °C) with water as a solvent. Incorporation of Eu³⁺ ions into the KZnF₃ matrix is confirmed by strong red emission upon ultraviolet (UV) excitation of the nanoparticles. The nanoparticles are coated with poly(acrylic acid) (PAA), which enhances the dispersibility of the nanoparticles in hydrophilic solvents. The strong red emission from Eu³⁺ ions is selectively quenched upon addition of Cu^II ions, thus making the nanoparticles a potential Cu^II sensing material. This sensing ability is highly reversible by the addition of ethylenediaminetetraacetic acid (EDTA), with recovery of almost 90 % of the luminescence. If the nanoparticles are strongly attached to a positively charged surface, dipping the surface in a Cu^II solution leads to the quenching of Eu³⁺ luminescence, which can be recovered after dipping in an EDTA solution. This process can be repeated for more than five cycles with only a slight decrease in the sensing ability. In addition to sensing, the strong luminescence from Eu³⁺‐doped KZnF₃ nanoparticles could be used as a tool for bioimaging.     

Tunisian traceability system

The concept of metrology first appeared in Tunisia towards 1909. At the end of the 1990s, bodies for evaluating conformity of measurement at different levels have been instituted to meet calibration and testing needs of the national industry. These bodies were divided into three categories: Class A where we find mainly the Central Laboratory for Analysis and Testing LCAE and the National Defence Laboratory DEFNAT; these two laboratories are in charge of the technological upgrading of the other bodies of Class B which, in turn, would transfer their knowledge to the industries, the latter constituting Class C. Nowadays, the accreditation of Tunisian laboratories at the international level by recognized reference foreign bodies and participation in the European proficiency network enabled the national laboratories of Tunisia to establish the degree of equivalence between their measurement results and those of other foreign laboratories.     

Microwave-assisted polycondensation of aliphatic diols of isosorbide with aliphatic disulphonylesters via phase-transfer catalysis

Numerous polycondensations of aliphatic diol of isosorbide and 1,8-dimesyloctane or other aliphatic dibromo and disulphonated alkylating agent was performed under phase-transfer catalytic conditions. In order to check the possible specific non-thermal microwave (MW) effects, reactions were comparatively performed inside a thermostated oil bath (Δ) under similar conditions. The reactions conditions were varied to optimize both, the fraction insoluble in methanol (FP MeOH) and the molecular weight of polyethers. In all cases, it was found that microwave-assisted polycondensations proceeded more efficiently compared with conventional heating (the reaction time was reduced from 24 h to 30 min: ratio 1/50). The polycondensation under microwave yields 63% of polyethers precipitating in methanol with relatively high average-weight molecular weights (M_w up to approximately 7000). The polyethers were characterized by NMR (¹H, ¹³C) and FT-IR spectroscopy and SEC measurement and MALDI-TOF mass spectrometry.     

A novel carbon/chitosan paste electrode for electrochemical detection of normetanephrine in the urine

Normetanephrine is a marker for pheochromocytoma, a rare catecholamine-secreting and neuroendocrine tumor, that arises from sympathetic and parasympathetic paraganglia. In this work, a novel carbon/chitosan electrode paste was used for sensitive voltammetric determination of normetanephrine and dopamine in the presence of ascorbic acid and uric acid. The modified electrode has shown an increase in the effective area of up to 68%, well-separated oxidation peaks, and an excellent electrocatalytic activity. The electrochemical response characteristics were investigated by cyclic and differential pulse voltammetry. Interestingly, high sensitivity and selectivity in the linear range of normetanephrine, dopamine, ascorbic acid, and uric acid concentrations were observed. The present method was applied in the urine sample and satisfactory results were obtained showing that this electrode is very suitable in pharmaceutical and clinical preparations.     

Combined static electromagnetic radiation and plant extract contribute to the biosynthesis of instable nanosilver responsible for the growth of microstructures

The instant biosynthesis of silver nanoparticles under static electromagnetic induction, its antibacterial activity and its post exposure monitoring were reported here. A mix of silver nitrate solution and Ruta chalepensis leaf extract was irradiated by a static electromagnetic field (SMF) of 200 mT. The characteristics and stability of the biosynthesized silver nanoparticles (Ag NPs) were determined. Compared to the non-irradiated exposure, the morphology and state of the obtained material change once the exposition to SMF is turned off. Shifting from 453 to 473 nm, the percentage of the needles shaped silver nanoparticles increased and continue to win and dominate the biomixture toward the spherical silver nanoparticles. TEM microscopy showed a wide range of silver materials designed in different nanoscale morphology and beyond where they undergo major changes affecting mainly the size, shape and form (dispersity) of nanosilver.     

Evaluation of endothelial cell adhesion onto different protein/gold electrodes by EIS

To study cell attachment to biomaterials, several proteins such as fibronectin, collagen IV, heparin, immunoglobulin G, and albumin have been deposited onto polystyrene adsorbed on a self-assembled monolayer (silane or thiol) on glass or gold, respectively. The different steps of this multilayer assembly have been characterized by electrochemical impedance spectroscopy (EIS). These data are compared to those of adhesion rate, viability percentage, and cytoskeleton labeling for a better understanding of the cell adhesion process to each protein. All the proteins are endothelial cell adhering biomolecules but not with the same features. A linear relationship has been established between adhesion rate and resistance of the endothelial cell/protein interface for all negatively charged proteins.     

Ring-expansion polycondensation of 2-stanna-1,3-dioxepane (or 1,3-dioxepene) with dicarboxylic acid chlorides

2,2-Dibutyl-2-stanna-1,3-dioxepane 1 (or 1,3-dioxepene 2) were prepared from 1,4-butane (or 1,4-butene) diol and dibutyltin dimethoxide. They were polycondensed at 80°C in n-heptane with adipoyl-, suberoyl, sabacoyl chloride and with decane-1,10-dicarbonyl chloride. In the case of suberoyl chloride and 2,2-dibutyl-2-stanna-1,3-dioxepane reaction time, temperature and stoichiometry were varied to optimize both the molecular weight and the fraction of cyclic polyesters. With a slight excess of the dicarboxylic acid chlorides, only macrocyclic polyesters were obtained in all cases. The resulting cyclic polyesters were characterized by viscosity measurements, by ¹H and ¹³C NMR and by MALDI-TOF mass spectrometry.     

Copolycarbonates of isosorbide and various diols

Isosorbide and equimolar amounts of various diols were polycondensed with diphosgene and pyridine. Bisphenol A, 3,3′‐dimethyl bisphenol A, bisphenol C, 1,3‐bis(4‐hydroxybenzoyloxy)propane, and 1,4‐cyclohexane diol were used as comonomers. The compositions were determined by ¹H NMR spectroscopy; the random sequences were characterized by ¹³C NMR spectroscopy. For the high‐molar‐mass copolycarbonates of bisphenol A, 3,3′‐dimethyl bisphenol A, and bisphenol C, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry proved that the chain growth was mainly limited by cyclization. Copolycarbonates with alternating sequences were obtained by the polycondensation of bisphenol A with isosorbide bischloroformiate or from isosorbide and bisphenol A bischloroformiate. In these cases, large amounts of cyclic oligo‐ and polycarbonates were also formed. The glass‐transition temperatures were determined by differential scanning calorimetry measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3616–3628, 2006