A facile gamma-ray method for radiodegradation of bilirubin in chloroform

Kinetics and concentration profile associated with the regulated radiodegradation of bilirubin in an organic solvent were assessed. The pure unconjugated specimen was prepared in chloroform (40.0 μM). The depletion of bilirubin was almost linear with dose, and complete degradation was accomplished with doses in excess of 100 Gy. The method was also evaluated for the explicit production of the long-wavelength isomer of biliverdin, which was characterized spectrometrically by an absorbance band in the region 600–650 nm. Results including differences in air, N₂ and O₂ purged samples are presented to identify the atmospheric medium for optimum production of biliverdin. The process was regulated by controlling the dose. The general rate constant of the depletion process was estimated at a dose rate of 5.67·10⁻²Gy·s⁻¹. The method is a convenient substitute for light illumination studies of bilirubin. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and characterisation of some new stabilisers for polyvinylchloride

Some new stabilisers having a chelating polymeric structure were synthesised and characterised, i.e., 8-hydroxyquinoline-formaldehyde chelating resins of Cd, Zn, and Pb. The efficiency of these new stabilisers was studied with respect to PVC. The stabilised PVC samples showed outstanding thermal stability as studied by thermogravimetric techniques, i.e., the percentage of HCl evolved reduced remarkably with increasing polymer decomposition temperature.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Phosphinsubstituierte Chelatliganden. XVIII. Penta- und Tetracarbonylmetall-Komplexe des Chroms,Molybdäns und Wolframs mit sekundären und tertiären Phosphinothioformamid-Liganden

Phosphine Substituted Chelate Ligands. XVIII. Penta- and Tetracarbonylmetal Complexes of Chromium, Molybdenum, and Tungsten with Secondary and Tertiary Phosphinothioformamide Ligands Mono- and bidentately coordinated phosphinothioformamide complexes are obtained by photochemical substitution of the metal hexacarbonyls M(CO)₆ (M ? Cr ( a ), Mo ( b ), W ( c )). The M(CO)₅ · THF adducts react with secondary thioamides under exclusion of light to give the P-coordinate pentacarbonyl complexes [(CO)₅MPPh₂C(S)NHR¹] (R¹ ? Ph ( 1a – c ), Me ( 2a )). The photoreaction of M(CO)₅ · THF with secondary and tertiary thioamides at low temperatures leads to the formation of the P, S-chelate complexes . The corresponding N-silylated complexes 6a – c (R¹ ? Me₃Si, R² ? Ph) are obtained by direct photosubstitution of M(CO)₆ in cyclohexane solution. The labile bis(thioformamide) complexes [(CO)₄M(PPh₂C(S)NHMe)₂] ( 7a – c , cis-trans isomers) are synthesized in low yields according to the same procedure. The attempted alkylation of the chelate complexes 3a – c remains unsuccessful, whereas the secondary thioformamides react with n-BuLi/CH₂Br₂ to give the methylene bis(thioformirnidoesters) [Ph₂PC(NR¹)S]₂CH₂ (R¹ ? Ph (8), Me ( 9 )) in quantitative yields.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

Adsorptive stripping voltammetry of sex hormones at the static mercury drop electrode

Controlled adsorptive accumulation of testosterone, methyltestosterone and progesterone on the static mercury drop electrode provides the basis for direct stripping measurement of these compounds ar nanomolar concentrations. The adsorptive stripping behavior is evaluated with respect to preconcentration time and potential, stripping mode, concentration dependence, drop size and other variables. With 5-min accumulation, peak current enhancements of 45, 18 anal 12 are observed for 5 × 10^?8 M testosterone, progesterone and methyltestosterone, respectively, relative to direct pulse voltammetry. Detection limits are 1.6 × 10^?10 M for testosterone, 2 × 10^?10 M for progesterone and 3.3 × 10^?10 M for methyltestosterone with 15-min preconcentration. The relative standard deviation for 8 × 10^?8 M progesterone is 3.4% (n=8). Applicability to direct measurements of methyltestosterone in pharmaceutical formulations is assessed.     

Pyrimidines,Part XXXI . Synthesis,reactions and properties of 6-acyl-1,3-dimethylpyrrolo[2,3-d]pyrimidine-2,4-diones

Acylations of 1,3-dimethyl- ( 1 ) and 1,3,7-trimethylpyrrolo[2,3-d]pyrimidine-2,4-dione ( 2 ) with anhydrides in the presence of trifluoroacetic acid proceed well to give in good yields the corresponding 7-acyl derivatives 3–11 . The 6-trichloroacetyl derivatives 5 and 6 are sensitive towards nucleophiles, which displace the trichloromethyl group easily by formation of the corresponding 6-carboxylic acid derivatives 12–23. The newly synthesized compounds have been characterized by elemental analysis, uv and ¹H nmr spectra and pK_a, determinations.     

Synthesis, structural characterization and electrochemical studies of new macrocyclic Schiff base containing pyridine head and its metal complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:13,14-tribenzo-9,12-dioksa-cyclopentadeca-1,5-diene was synthesized by reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane. Then, its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes were synthesized by the template effect by the reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Co(NO₃)₂ · 6H₂O, La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV-Vis spectra, magnetic susceptibility, thermal gravimetric analysis, conductivity measurements, mass spectra, and cyclic voltammetry. All complexes are diamagnetic and Cu(II) complex is binuclear. The Co(II) was oxidized to Co(III). The comparative electrochemical studies show that the nickel complex exhibited a quasi-reversible one-electron reduction process, while copper and cobalt complexes gave irreversible reduction processes in DMSO solution.     

Koordinationschemie funktioneller Phosphorylide. VII. Pentacarbonylmetall-Komplexe des Cyanmethylen-triphenyl-phosphorans, [Ph3PCH(CN)] · M(CO)5 (M = Cr,Mo, W)

Coordination Chemistry of Functional Phosphorus Ylides. VII. Pentacarbonylmetal Complexes of Cyanomethylene Triphenylphosphorane, [Ph₃P?CH(CN)] · M(CO)₅ (M = Cr, Mo, W) The pentacarbonyl complexes [Ph₃P?CH(CN)] · M(CO)₅ ( 1a –c) are obtained by reaction of the irradiated metal hexacarbonyls M(CO)₆ (M = Cr, Mo, W) with cyanomethylene triphenylphosphorane under exclusion of light. The IR and NMR spectra indicate N-coordination of the ligand, that means a nitrile complex. The chromium complex 1a crystallizes triclinic (space group P1 , Z = 2) with the lattice constant a = 1126.5(2), b = 1153.6(3), c = 951.4(3) pm; α = 103.47(3), β = 102.04(3), γ = 84.00(2)°. The linear array of the ligand atoms C7, C6, N forms an angle of 168.1(5)° with the metal-nitrogen bond. Significant bond distances are Cr? N = 206.2(6), N? C6 = 115.3(7), C6? C7 = 137.2(8) and P? C7 = 170.9(5) pm.     

All-optical 2R-regeneration and continuous wave to pulsed signal wavelength conversion based on fiber nonlinearity

In this paper, we propose a novel all-optical 2R (re-amplification and re-shaping) regenerator based on inducing nonlinear chirp over a continuous wave probe. The regenerator also performs continuous wave to pulsed wavelength conversion. The chirp is induced in a highly nonlinear fiber by the data modulated pulsed signal that is to be regenerated. Offset filtering is employed at the output of the highly nonlinear fiber to extract the frequencies generated as a result of chirping. The regenerator performance has been evaluated with the help of bit-error-rate plots and eye diagrams at different values of optical signal to noise ratios. Apart from re-shaping and re-amplification, inclusion of the regenerator results in better resilience to amplified spontaneous emission noise.