Chemometric approach in optimization of micellar liquid chromatographic separation of some halogenated phenols

Simultaneous optimization of separation quality and analysis time of the micellar liquid chromatography of nine chlorophenol isomers was investigated. The effect on retention of three experimental parameters was studied using multivariate analysis. The factors studied were the concentration of sodium dodecyl sulfate, propanol content and pH of the mobile phase. The experiments were performed according to the face-centred cube central composite design and the inverse form of the experimental retention times for analytes were fitted to the polynomial models. The results of the analysis of variance showed that the models obtained explain greater than 99% of the variance observed in the chromatograms. Good predictive ability of the models was verified as high values of the statistics R² and F were obtained for the linear relationship between predicted cross-validated and experimental values of the dependent variable. The study showed that the use of Pareto-optimality method, an approach from multi-criteria decision-making, allows the selection of the best possible combinations of separation and analysis time in micellar liquid chromatography of chlorophenols.     

AN ACTION SPECTRUM FOR LETHAL PHOTOSENSITIZATION OF Candida albicans BY 8-MOP AFTER LOW-DOSE BROAD-BAND UV-A IRRADIATION; AN ACTION SPECTRUM FOR 8-MOP 4′,5′- MONOADDUCTS?

An action spectrum was obtained for lethal photosensitization of Candida albicans that had been pre-irradiated with a sub-lethal low dose of broad-band UV-A after incubation with 8-methoxypsoralen and then washed to remove any non-photobound 8-methoxypsoralen. The resultant spectrum with a peak in the 320-335 nm region was similar to that obtained by a conventional method (single irradiation only) and also to the absorption spectrum of the 4',5'-monoadduct. These data support the hypothesis that the chromophore for lethal photosensitization by 8-methoxypsoralen is the 8-methoxypsoralen/DNA 4',5'-monoadduct rather than 8-methoxypsoralen itself.     

Reaction of tris(trimethylsilyl)methylsilicon halides with methanolic sodium methoxide. Probability of sila-olefin intermediates

The compounds TsiSiR₂X [Tsi = Me₃Si)₃C; R = Me, X = Cl, Br, I, or R = Ph, X = F, Cl, Br, I)] react with boiling 2 M MeONa-MeOH to give products of the type (Me₃Si)₂CHSiR₂OMe. It is suggested that the reaction proceeds through an elimination, analogous to E2 eliminations of alkyl halides, involving synchronous attack of MeO^? at an Me₃Si group, liberation of X^?, and formation of (Me₃Si)₂CSiR₂. The compounds TsiSiPhMeF TsiSiPhCl₂ react analogously to give (Me₃Si)₂CHSiPhMe(OMe) and (Me₃Si)₂CHSiPh(OMe)₂ [tha latter presumably by solvolysis of the initially-formed (Me₃Si)₂CHSiPhCl(OMe)]. The compounds TsiSiMe₂OMe and TsiSiMe₃ do not react, while TsiSiMe₂H gives TsiH. The compound TsiSiCl₃ reacts with 0.1 M MeONa-MeOH to give the substitution and elmination products TsiSiCl₂(OMe) and (Me₃Si)₂CHSi(OMe)₃ in ca. $\text{1}\text{2}$ ratio.     

Novel domino reactions for diterpene synthesis

New types of concerted domino acylation-cycloalkylation/alkylation-cycloacylation reactions have been described. These processes promoted by methanesulfonic acid-phosphorus pentoxide and concentrated H(2)SO(4), respectively, provide efficient, elegant, and expeditious routes for biologically active naturally occurring diterpenoids, namely (+/-)-ferruginol (1), (+/-)-nimbidiol (2), (+/-)-nimbiol (3), (+/-)-totarol (4), and ar-abietatriene (5).     

Hydroarylation of alkynes and alkenes through alumina-sulfuric acid catalyzed regioselective CC bond formation

A highly atom-efficient synthetic protocol for hydroarylation of terminal-aryl alkynes and styrene through the regioselective CC bond formation via the electrophilic addition of naphthols and substituted phenols has been developed using alumina-sulfuric acid as a heterogeneous supported solid acid catalyst. This methodology shows excellent regioselectivity and affords the desired product in good to excellent yield. The heterogeneous catalyst can also be recycled efficiently without much loss of activity.     

Photoacoustic spectra and modes of vibration of TNT and RDX at CO2 laser wavelengths

IR spectra in the 'Finger Print' spectral range has great importance in qualitative and quantitative analysis of explosives like trinitrotoluene (TNT) and cyclotrimethyltrinitramine (RDX). Highly resolved IR bands of these compounds have been recorded in the 9.6 and 10.6 microm regions of CO2 laser. TNT and RDX are large molecules each having 21 atoms and it is very difficult to assign the modes of vibrations by comparison with those in other molecules making the vibrational assignments of observed bands a difficult task. The ab initio quantum chemical calculation is used for determining the molecular geometries and modes of vibration of these molecules with a view to assign their normal modes in the high resolution vibrational photoacoustic spectra. These assignments are very reliable in view of the good agreement between the observed and calculated frequencies of deuterated TNT.     

Exact Solution of a(2+1)-Dimensional Anisotropic Star in Finch and Skea Spacetime

We provide a new class of interior solution of a(2+1)-dimensional anisotropic star in Finch and Skea spacetime corresponding to the BTZ black hole. We develop the model by considering the MIT bag model EOS and a particular ansatz for the metric function grrproposed by Finch and Skea [M.R. Finch and J.E.F. Skea, Class. Quantum.Grav. 6(1989) 467]. Our model is free from central singularity and satisfies all the physical requirements for the acceptability of the model.     

Surface-Mediated Solid Phase Reaction. IX. A Convenient Procedure for Aldol Reaction of Ketene Silyl Acetals with Aldehydes on the Solid Surface of Alumina

The aldol reaction of ketene silyl acetals with aldehydes proceeds efficiently on the solid surface of alumina impregnated with anhydrous zinc chloride under sonication providing aldol products in high yields and with good stereoselectivity.     

Structural characterization of dodecyltrimethylammonium (DTMA) bromide modified sepiolite and its adsorption isotherm studies

In this study, dodecyltrimethylammonium (DTMA) bromide was used to modify natural sepiolite via an ion exchange reaction to form DTMA-sepiolite. Sepiolite and DTMA-sepiolite were then characterized by using Brunauer–Emmett–Teller (BET), elemental analysis, XRD, FT-IR, thermogravimetric (TG) and zeta potential analysis techniques. The BET surface area of sepiolite significantly decreased from 152.14 m² g^–1 to 88.63 m² g^–1, after the modification, due to the coverage of the pores of sepiolite. DTMA was located onto sepiolite according to the differential thermogravimetric (dTG) peaks of DTMA-sepiolite. XRD results confirmed the interaction between DTMA⁺ cations and sepiolite. FT-IR spectra indicated the existence of DTMA functional groups on sepiolite surface. After the characterization was accomplished, adsorption isotherm studies of naphthalene, which is the first member of the polycyclic aromatic hydrocarbons (PAHs), were carried out. The maximum adsorption capacity of DTMA-sepiolite for naphthalene was determined from Langmuir isotherm equation at pH 6 and 20 °C as 1.88 × 10^–4 mol g^?1 or 24.09 mg g^?1.     

1,3-Migration of Trimethylsilyl Group from Carbon to Oxygen in Highly Sterically Hindered Silanol of the Type (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH and Reaction of the Related Iodide with Iodine Monochloride and Iodine Monobromide

The silanol (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH has been shown to isomerize to (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) when it was kept at room temperature for 10 h in 0.2 M NaOMe/MeOH. Corresponding isomerizations of the above silanol (to give (Me 3 Si) 2 CHSi(C 6 H 4 Me- p ) (Me)(OSiMe 3 )) are complete after 26 h under reflux in pyridine. The reaction involve 1,3-migration from carbon to oxygen within a silanolate ion to give a carbanion, which rapidly acquires a proton from the solvent. Treatment of (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH with MeLi in Et 2 O/THF give, by the same rearrangement, the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) which on treatment with Me 2 SiHCl gives (Me 3 Si) 2 C(SiMe 2 H)Si(C 6 H 4 Me- p )(Me)(OSiMe 3 ) and (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). When the experiment was repeated, but with Me 3 SiCl in place of Me 2 SiHCl, it gives exclusively (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). Treatment of the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) with Mel gives exclusively (Me 3 Si) 2 CMeSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). The related iodide (Me 3 Si) 3 CSi(C 6 H 4 Me- p )Mel reacts with ICI and IBr to give rearranged (Me 3 Si) 2 C(SiMe 2 X)Si(C 6 H 4 Me- p )Me 2 and unrearranged products (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeX, (X = Cl, Br) respectively. The rearranged bromide (Me 3 Si) 2 C(SiMe 2 Br)Si(C 6 H 4 Me- p )Me 2 reacts with a range of silver [I] salts AgY (Y = OOCCH 3 , SO 4 2 m ) and Mercury [II] salt HgY 2 (Y = OOCCH 3 , SO 4 2 m ) in glacial CH 3 COOH to give the corresponding species (Me 3 Si) 2 C(SiMe 2 OOCCH 3 )Si(C 6 H 4 Me- p )Me 2 . The reaction of the bromide with AgBF 4 in MeOH or i -PrOH give the corresponding rearranged products (Me 3 Si) 2 C(SiMe 2 Y)Si(C 6 H 4 Me- p )Me 2 (Y = --OMe, --OPr i ).