Optimal design of gears contact interface modification for an objective as minimum impact resistance of initial meshing-in time domain

Meccanica - In gear pair actual alternating meshing process, the comprehensive errors of the transmission system and the thermal elastic deformation of the teeth body cause the gears in the meshing...     

Hitherto-Unexplored Photodynamic Therapy of Ag2S and Enhanced Regulation Based on Polydopamine In Vitro and Vivo

Given their superior penetration depths, photosensitizers with longer absorption wavelengths present broader application prospects in photodynamic therapy (PDT). Herein, Ag₂S quantum dots were discovered, for the first time, to be capable of killing tumor cells through the photodynamic route by near-infrared light irradiation, which means relatively less excitation of the probe compared with traditional photosensitizers absorbing short wavelengths. On modification with polydopamine (PDA), PDA-Ag₂S was obtained, which showed outstanding capacity for inducing reactive oxygen species (increased by 1.69 times). With the addition of PDA, Ag₂S had more opportunities to react with surrounding O₂, which was demonstrated by typical triplet electron spin resonance (ESR) analysis. Furthermore, the PDT effects of Ag₂S and PDA-Ag₂S achieved at longer wavelengths were almost identical to the effects produced at 660 nm, which was proved by studies in vitro. PDA-Ag₂S showed distinctly better therapeutic effects than Ag₂S in experiments in vivo, which further validated the enhanced regulatory effect of PDA. Altogether, a new photosensitizer with longer absorption wavelength was developed by using the hitherto-unexplored photodynamic function of Ag₂S quantum dots, which extended and enhanced the regulatory effect originating from PDA.     

Characteristics of black carbon aerosol in Jiaxing,China during autumn 2013

We conducted measurements of black carbon（BC） aerosol in Jiaxing,China during autumn from September 26 to November 30,2013.We investigated temporal and diurnal variations of BC,and its correlations with meteorological parameters and other major pollutants.Results showed that hourly mass concentrations of BC ranged from 0.2 to 22.0 μg/m³,with an average of 5.1 μg/m³.The diurnai variation of BC exhibited a bimodal distribution,with peaks at 07:00 and 18:00.The morning peak was larger than the evening peak.The mass percentages of BC in PM_2.5 and PM₁₀ were 7.1%and 4.8%,respectively.The absorption coefficient of BC was calculated to be 44.4 Mm^-1,which accounted for 11.1%of the total aerosol extinction.BC was mainly emitted from local sources in southwestern Jiaxing where BC concentrations were generally greater than 11 μg/m³ during the measurement period.Correlation analysis indicated that the main sources of BC were motor vehicle exhaust,and domestic and industrial combustion.     

Synthesis and Self-Assembly of Mixed-Graft Block Copolymers

Mixed-graft block copolymers (mGBCPs) consist of two or more types of polymeric side chains grafted on a linear backbone in a random, alternating, or pseudo-alternating sequence. They can phase-separate with the backbone serving as the interface of the blocks, and the side chains dominate their self-assembly behavior. mGBCPs are an accessible polymer architecture for exploring the idea of encoding polymer properties through the macromolecular architecture, as there are two distinct structural components that can be tuned: the backbone and the side chains. In this Concept article, the current literature on the synthesis of mGBCPs is reviewed, and the advantages and disadvantages of each synthetic method are noted. The self-assembly of mGBCPs is also discussed where possible. Finally, directions for future research on mGBCP synthesis and self-assembly are suggested.     

Asymptotics of the necessary sample size under small error probabilities

The asymptotics of the necessary sample size is considered in testing close hypotheses when the error probabilities vanish. Proceedings of the XVII Seminar on Stability Problems for Stochastic Models, Kazan, Russia, 1995, Part III.     

光纤白光干涉仪等臂长技术研究

介绍了几种光纤干涉仪等臂长技术,比较了各自的优缺点和适用范围,对光纤干涉仪的平衡有较大的参考价值。     

Analysis of queueing policies in QoS switches

It is widely accepted that next-generation networks will provide guaranteed services, in contrast to the “best effort” approach today. We study and analyze queueing policies for network switches that support the QoS (Quality of Service) feature. One realization of the QoS feature is that packets are not necessarily all equal, with some having higher priorities than the others. We model this situation by assigning an intrinsic value to each packet. In this paper we are concerned with three different queueing policies: the nonpreemptive model, the FIFO preemptive model, and the bounded delay model. We concentrate on the situation where the incoming traffic overloads the queue, resulting in packet loss. The objective is to maximize the total value of packets transmitted by the queueing policy. The difficulty lies in the unpredictable nature of the future packet arrivals. We analyze the performance of the online queueing policies via competitive analysis, providing upper and lower bounds for the competitive ratios. We develop practical yet sophisticated online algorithms (queueing policies) for the three queueing models. The algorithms in many cases have provably optimal worst-case bounds. For the nonpreemptive model, we devise an optimal online algorithm for the common 2-value model. We provide a tight logarithmic bound for the general nonpreemptive model. For the FIFO preemptive model, we improve the general lower bound to 1.414, while showing a tight bound of 1.434 for the special case of queue size 2. We prove that the bounded delay model with uniform delay 2 is equivalent to a modified FIFO preemptive model with queue size 2. We then give improved upper and lower bounds on the 2-uniform bounded delay model. We also show an improved lower bound of 1.618 for the 2-variable bounded delay model, matching the previously known upper bound.     

CHARACTERIZATIONS OF JORDAN (?)-SKEW MULTIPLICATIVE MAPS ON OPERATOR ALGEBRAS OF INDEFINITE INNER PRODUCT SPACES

Let H and K be indefinite inner product spaces. This paper shows that a bijective map φ:B(H)→B(K) satisfies φ(AB B A) =φ(A)φ(5) φ(B) φ(A) for every pair A,B ∈B(H) if and only if either φ(A) = cU AU for all A or φ(A) = cUA U for all A; φsatisfies φ(AB A) = φ(A)φ(B) φ(A) for every pair A,B ∈B(H) if and only if either φ(A) = UAV for all A or φ(A) = UA V for all A, where A denotes the indefinite conjugate of A, U and V are bounded invertible linear or conjugate linear operators with U U = c-1I and V V = cI for some nonzero real number c.     

Preparation and characterization of acrylic‐based black particles of poly(methyl methacrylate‐co‐ethylene glycol dimethacrylate) by dispersion polymerization for electrophoretic displays

Ultrafine black particles, ranging in diameter from 1 to 3 μm, were prepared by dispersion polymerization in a methanol/water mixture with vinyl monomers, nonpolymerizable Sudan black B dyes, and fluorescein isothiocyanate labeled charge control additives. Both the ratio of the methanol to the water dispersion medium and the polymeric stabilizer concentration had significant effects on the particle size. The important role of the stabilizer concentration lay in the particle formation step, during which it determined the particle stability and final particle size. These could affect the extent of the aggregation of nuclei by changing the adsorption rate of the stabilizer and the viscosity of the dispersion medium, resulting in smaller particles. The fluorescent‐labeled charge control additives strongly affected the electrophoretic mobility. A small concentration of fluorescent‐labeled charge control additives increased the electrophoretic mobility. However, a further addition reduced the electrophoretic mobility of the polymer particles. The concentration dependence of the fluorescent‐labeled charge control additives on the deposition behavior in the polymer particles was successfully imaged and thereafter quantified by image analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5608–5616, 2004     

Implementation of an integrated glucose POCT system

In response to a change of the Belgian National Directives whereby hospital laboratories became responsible for all point-of-care testing (POCT) performed within hospital walls a standardized and automated POC glucose-testing system was implemented in our hospital. The system consists of 50 AccuCheck Inform instruments (Roche Diagnostics, Vilvoorde, Belgium), 50 docking stations, a DataCare Server, and connections to the medical laboratory information system (MOLIS, Sysmex, Barchon, Belgium) and to the hospital information system. Implementation involved many parties and extensive preparation and communication. Key issues were bar-coded patient and user identification, training, and responsibilities. One year after the hospital wide implementation of this system the quality of POC glucose testing has significantly increased, thereby improving patient safety. This study describes a stepwise change over involving the medical laboratory and with a focus on hands-on quality.Presented at the ninth conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.