Evaluation of PLE exhaustiveness for the extraction of PCBs from sediments and the influence of sediment characteristics

Pressurized liquid extractions were performed on eight sediments in order to investigate if a modified US EPA method (100 °C, 100 bar, n-heptane/acetone (1:1), 2 × 5 min) provided exhaustive extractions of polychlorinated biphenyls (PCBs) from sediment, and to study if the extractability of PCBs from the different sediments was affected by characteristics of the sediment. The recovery from the eight native sediments, contaminated in nature, was between 96.4% and 98.9%, as an average of the recoveries from 10 PCB congeners. Hundred percent recovery was defined as the sum of two consecutive extractions (2 × 5 min each) at the stated conditions. The recoveries of the individual congeners were above 94%, except for one congener in one sediment, which had a recovery of 92%. When the recoveries and different characteristics of the sediments were compared, no correlation appeared between recoveries and sediment PCB concentration, total organic carbon (TOC), soot carbon (SC) or amorphous carbon (AC). The fact that carbon did not influence the extractions was somewhat surprising, since previous experiments have indicated a connection. Instead, statistically significant (p < 0.05) correlations were observed for water content and carbon/nitrogen (C/N) ratio. The decrease in recoveries with decreased water content was attributed to less access of the solvent to the analytes due to less matrix swelling. The lowered recoveries with increased C/N ratio can indicate that a difference in structure of the organic matter exists, which influences the binding strength between the analytes and the matrix. The difference in structure can possibly be explained by different origin of the organic matter or by aging effects. Overall the method was found to be exhaustive and the excellent recoveries show that sediment characteristics do not influence the extractions markedly.     

Temperature quenched DODAB dispersions: fluid and solid state coexistence and complex formation with oppositely charged surfactant

Dilute dispersions of the synthetic bilayer forming double-chained cationic lipid dioctadecyldimethylammonium bromide (DODAB) were investigated. In dispersions sonicated above the chain melting temperature Tm (approximately 45 degrees C) it was found by H NMR that about 50% of the surfactant chains remained fluid when the samples were cooled to room temperature, which is 20 degrees C below Tm. In contrast, there was no sign of a fluid fraction in unsonicated samples at room temperature. The addition of the anionic surfactant sodium dodecyl sulfate (SDS) to DODAB dispersions at room temperature resulted in the formation of an essentially stoichiometric DODA-DS complex with frozen chains, as seen by titration calorimetry and H NMR experiments. For sonicated samples, turbidity experiments demonstrated that, after a fast complexation reaction, the system remains colloidally stable unless the SDS-to-DODAB mixing ratio is too close to unity. H NMR experiments also showed that in the unreacted DODAB the fraction of fluid chains remained close to 50%, indicating either that SDS reacts equally fast with fluid and frozen DODAB or that there is a relaxation of the fluid fraction after the complexation. The melting enthalpy and the melting temperature of the alkyl chains rise gradually as the mixing ratio increases. We observed with cryo-TEM that the fraction of large unilamellar vesicles was significantly larger after addition of SDS. This indicates vesicle fusion. Based on both wide- and small-angle X-ray scattering patterns, the structure of the equimolar SDS-DODAB complex at 25 degress C was proposed to be lamellar.     

Thermal transitions of DODAB vesicular dispersions

Two endothermic transitions, at 36°C and 44°C, were observed with differential scanning calorimetry (DSC) upon heating dioctadecyldimethylammonium bromide vesicle dispersions that were equilibrated below 15°C while in samples kept at 25°C there was only the transition at 44°C, which was shown to be the gel to liquid–crystalline transition by ¹H-NMR measurements. The transition at 36°C was reversed in an exothermic transition around 13°C upon cooling. The slowness of this transition at ambient temperatures suggests that the presence of the transition at 36°C in a DSC upscan depends strongly on the sample history.     

Effects of methyl substitution on radiative and solvent quenching rate constants of [Ru(phen)2dppz]2+ in polyol solvents and bound to DNA

Methyl substituents on the distant benzene ring of the dppz ligand in the "light switch" complex [Ru(phen)(2)dppz](2+) have profound effects on the photophysics of the complexes in water as well as in the polyol solvents ethylene glycol, glycerol, and 1,2- and 1,3-propanediol. Whereas 11,12-dimethyl substitution decreases the rate of quenching by diminishing hydrogen bonding by solvent, the 10-methyl substituent in addition also decreases both the radiative and the nonradiative rate constant for decay to the ground state of the non-hydrogen-bonded excited state species. For both the 10-methyl and the 11,12-dimethyl derivatives, the effect of methyl substitution on the equilibrium of solvent hydrogen bonding to the excited state is due to changes in the entropy terms, rather than in the enthalpy, indicating that the effect is a steric perturbation of the solvent cage around the molecule. When intercalated into DNA, the effects of methyl substitution is smaller than those in polyol solvent or water, suggesting that the water molecules that quench the excited state by hydrogen bonding to the phenazine aza nitrogens mainly access them from the same groove as in which the Ru(II) ion resides. Since the Delta-enantiomer of [Ru(phen)(2)10-methyl-dppz](2+) has an absolute quantum yield of up to 0.23 when bound to DNA, a value 7000 times higher than in pure water solution, it is promising as a new luminescent DNA probe.     

Solvation of small hydrophobic molecules in formamide: A calorimetric study

The solubility and enthalpy of solution of benzene, cyclohexane, hexane, and heptane in formanide have been determined from titration microcalorimetric experiments at 25°C. The solution enthalpies are significantly more endothermic than in water but still the solubility is much higher. The entropy changes in formamide are small and positive and do not vary significantly with size. The enthalpies of solution of some 1-alkanols, 1-chloro- and 1,5-dichloropentane and pentane-1,5-diol were measured as functions of concentration. The solution enthalpies for 1-alkanols from methanol to decanol increase linearly with chain length. The enthalpic interaction coefficients h_xx are small and negative in formamide while they are large and positive in water. The partial molar heat capacities C _p,2 ^o for 1-propanol, 1-pentanol, benzene and cyclohexane in formamide were determined at 25°C from drop heat capacity measurements. Values of C _p,2 ^o are only slightly larger than the molar heat capacities of the liquid solutes.     

TBADH activity in water-miscible organic solvents: correlations between enzyme performance, enantioselectivity and protein structure through spectroscopic studies

The enantioselective reduction of 2-pentanone to (R)- and (S)-2-pentanol by Thermoanaerobacter (formerly Thermoanaerobium) brockii alcohol dehydrogenase (TBADH) in mixtures of water and water-miscible organic solvents was investigated. Significant enzymatic activity was retained in up to 87% methanol, ethanol and acetonitrile. The changes in enzyme activity as a function of organic solvent were correlated to structural alterations of TBADH with a series of spectroscopic studies (fluorescence, fluorescence quenching and circular dichroism (CD)). Interestingly, this study shows that the tetrameric form of TBADH is not critical for catalytic performance.     

Determining PCB desorption behaviour on sediments with SFE and investigating the dependency of selective fractions on sediment characteristics

A method for studying PCB desorption behaviour from sediments using supercritical fluid extraction (SFE) and pressurized liquid extraction (PLE) is presented. Four sediments were investigated and extracted with supercritical carbon dioxide employing increasingly harsher extraction conditions ranging from 40°C and 12?MPa to 100°C and 36.5?MPa. To ensure quantitative extractions, the remaining SFE residues were also extracted with PLE. Resulting profiles identified at least three different PCB fractions within the four sediments. Furthermore, a distinct fraction was obtained with extraction for 2?h at 40°C and 36.5?MPa. This fraction has previously been found to correlate well with bioavailable fractions. The dependency of this fraction on sediment total organic carbon (TOC) was investigated, both for sediments examined in this study as well as for previously reported values using the same extraction conditions. It was found that TOC does not correlate to selective SFE, which indicates that the use of TOC to predict bioavailability is questionable.     

Arylation with Unsymmetrical Diaryliodonium Salts: A Chemoselectivity Study

Phenols, anilines, and malonates have been arylated under metal‐free conditions with twelve aryl(phenyl)iodonium salts in a systematic chemoselectivity study. A new “anti‐ortho effect” has been identified in the arylation of malonates. Several “dummy groups” have been found that give complete chemoselectivity in the transfer of the phenyl moiety, irrespective of the nucleophile. An aryl exchange in the diaryliodonium salts has been observed under certain arylation conditions. DFT calculations have been performed to investigate the reaction mechanism and to elucidate the origins of the observed selectivities. These results are expected to facilitate the design of chiral diaryliodonium salts and the development of catalytic arylation reactions that are based on these sustainable and metal‐free reagents.     

One-Pot Synthesis and Applications of N-Heteroaryl Iodonium Salts

An efficient one-pot synthesis of N-heteroaryl iodonium triflates from the corresponding N-heteroaryl iodide and arene has been developed. The reaction conditions resemble our previous one-pot syntheses, with suitable modifications to allow N-heteroaryl groups. The reaction time is only 30 min, and no anion exchange is required. The obtained iodonium salts were isolated in a protonated form, these salts can either be employed directly in applications or be deprotonated prior to use. The aryl groups were chosen to induce chemoselective transfer of the heteroaryl moiety to various nucleophiles. The reactivity and chemoselectivity of these iodonium salts were demonstrated by selectively introducing a pyridyl moiety onto both oxygen and carbon nucleophiles in good yields.     

Synthesis and Biological Studies of O3-Aryl Galactosides as Galectin Inhibitors

β-Galactose derivatives have recently been reported to selectively inhibit galectin-3, and a library of O3-arylated galactosides with varying substitution patterns was designed to study such inhibitions further. The O3-arylated galactosides were synthesized using diaryliodonium salts under mild and transition metal free conditions, providing the target products in moderate to good yields. An O3-trifluoroethylated galactoside was also synthesized using iodonium salt chemistry. Azido-substituted products were subsequently transformed into the corresponding triazoles. After deprotection, a selection of galactoside derivatives were evaluated for inhibitory potencies against galectins-1, 3, 4 N (N-terminal domain), 4 C (C-terminal domain), 7, 8 N, 8 C, 9 N, and 9 C and one compound with promising affinity and selectivity for both the N- and C-terminal domain of galectin-9 was discovered.