Studies in spiroheterocycles. Part V. Synthesis of new fluorinated spiro[3H-indole-3,2′-oxiran]-2(1H)-ones

Reinvestigation of the reaction of 3-aroylmethyleneindol-2-ones with hydrogen peroxide has revealed that a 1:1 isomeric mixture of spiro[3H-indole-3,2′-oxiran]-2(1H)-ones is formed. The structures of the two isomers have been confirmed by their ir, pmr and mass spectral studies. Mass fragmentation patterns of these compounds are discussed.     

Investigation of the reactions of fluorinated isatins and N-acetylisatins with thiocarbohydrazide: Synthesis of a novel spiro system: 2-oxo-1′,2′,4′,5′-tetrahydrospiro[3H-indole-3,3′-1,2,4,5-tetrazine]-6′-thione

A novel system 2-oxo-1′,2′,4′,5′-tetrahydrospiro[3H-indole-3,3′-1,2,4,5-tetrazine]-6′-thione has been synthesized by the treatment of fluorinated isatins with thiocarbohydrazide in aqueous ethanolic medium. Under exactly similar conditions, N-acetylisatin gave exclusively thiocarbohydrazone. The spiro product, on treatment with acetic acid, gave fluorinated isoindigo. Characterization of these products have been done by elemental analyses, ir, pmr and mass spectral studies.     

Iron-57 Mössbauer spectroscopic studies of materials of composition Fe x NbTiP3O12: materials with low concentrations of iron and the effects of treatment in air

The⁵⁷Fe Mössbauer spectrum recorded from the material of composition Fe_0.25NbTiP₃O₁₂ shows the presence of Fe²⁺ in a distribution of approximately octahedral type I sites within the channels of the NbTiP₃O₁₂ structure. A comparison of the results with those recorded from the material Fe_0.33NbTiP₃O₁₂ demonstrates the existence of an upper limit to the occupation by the Fe²⁺ species of the type I sites. Lattice parameter measurements and⁵⁷Fe Mössbauer spectroscopy show that treatment of Fe_0.25NbTiP₃O₁₂ in air induces the migration of the incorporated iron from the channels to form macroscopic -Fe₂O₃.     

Molecular electrostatic potentials as input for the alignment of HIV-1 integrase inhibitors in 3D QSAR

Comparative molecular similarity indices analysis (CoMSIA), a three-dimensional quantitative structure activity relationship (3D QSAR) paradigm, was used to examine the correlations between the calculated physicochemical properties and the in vitro activities (3'-processing and 3'-strand transfer inhibition) of a series of human immunodeficiency virus type 1 (HIV-1) integrase inhibitors. The training set consisted of 34 molecules from five structurally diverse classes: salicylpyrazolinones, dioxepinones, coumarins, quinones, and benzoic hydrazides. The data set was aligned using extrema of molecular electrostatic potentials (MEPs). The predictive ability of the resultant model was evaluated using a test set comprised of 7 molecules belonging to a different structural class of thiazepinediones. A CoMSIA model using an MEP-based alignment showed considerable internal as well external predictive ability (r2(cv) = 0.821, r2(pred) = 0.608 for 3'-processing; and r2(cv) = 0.759, r2(pred.) = 0.660 for 3'-strand transfer).     

Synthesis of 2-Azobenzo[b]thiophene Derivatives and Their Application on Nylon Fibre

A series of novel monoazo disperse dyes derived from the coupling of diazotized 2-aminobenzo[b]thiophene derivatives with N-arylmaleimides is described. The monoazo disperse dyes applied to nylon fabric and their dyeing performance has been assessed. These dyes have been found to give light yellow to reddish pink color shades with very good depth and levelness on nylon fabric. The dyed fabric shows moderate light fastness and excellent washing, rubbing, perspiration, and sublimation fastness. The percentage dyebath exhaustion on nylon fabric has been found to be good and acceptable.     

Amino acid analysis by using comprehensive two-dimensional gas chromatography

The separation characteristics of alkylchloroformate-derivatised amino acids (AAs) by using comprehensive two-dimensional gas chromatography (GC×GC) is reported. The use of a low-polarity/polar column set did not provide as good a separation performance as that achieved with a polar/non-polar column set, where the latter appeared to provide less correlation over the separation space. The degree of component correlation in each column set was estimated by using the correlation coefficient (r²; for ¹t_R and ²t_R data) with the low-polarity/polar and polar/low-polarity sets returning correlation coefficients of 0.86, and 0.00 respectively, under the respective conditions employed for the experiments. The 1.5-m non-polar ²D column (0.1-mm ID; 0.1-m film thickness) gave peak halfwidths of the order of 50–80 ms. Linearity of detection was good, over a three order of magnitude concentration range, with typical lower detection limit of ca. 0.01 mg L^–1, compared with 0.5 mg L^–1 for normal GC operation with splitless injection. The method was demonstrated for analysis of AAs in a range of food and beverage products, including wine, beer and honey. The major AA in these samples was proline. The Heineken beer sample had a relatively more complex and more abundant AA content compared with the other beer sample. The wine and honey samples also gave a range of AA compounds. Repetition of the sample preparation/analysis procedure for the honey sample gave acceptable reproducibility for individual AAs.     

One‐Pot,Three‐Component Synthesis of Novel Spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones in an Ionic Liquid as a Reusable Reaction Media

A facile one‐pot, three‐component protocol for the synthesis of novel spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones by condensing 1H‐indole‐2,3‐diones, 4H‐1,2,4‐triazol‐4‐amine and 2‐sulfanylpropanoic acid in [bmim]PF₆ (1‐butyl‐3‐methyl‐1H‐imidazolium hexafluorophosphate) as a recyclable ionic‐liquid solvent gave good to excellent yields in the absence of any catalyst (Scheme 1 and Table 2). The advantages of this protocol over conventional methods are the mild reaction conditions, the high product yields, a shorter reaction time, as well as the eco‐friendly conditions.     

Facile ion-exchange synthesis of Gd-doped K2Ta2O6 photocatalysts with enhanced visible light activity

One of the well-known ways of increasing the visible light absorption capability of semiconducting materials is cation doping. This study aims to use Gd doping to tailor the bandgap energy of K₂Ta₂O₆ (KTO) for photocatalytic degradation of organic pollutants under visible light irradiation. Accordingly, the parent KTO and Gd-doped KTO with different Gd concentrations (K_2-3xGd_xTa₂O₆; x = 0.025, 0.05, 0.075 and 0.1 mol%) were synthesized by hydrothermal and facile ion-exchange methods, respectively. The powder XRD, FT-IR, SEM-EDS, TEM-SAED, N₂ adsorption-desorption, XPS, UV–Vis DRS, PL and ESR techniques were used to investigate the effect of Gd dopant concentration on the structural and photocatalytic properties of KTO. The photocatalytic activity of these samples was investigated for the photocatalytic degradation of methylene blue (MB) dye in an aqueous solution at room temperature under visible light irradiation. The experimental results show that all Gd-doped KTO samples exhibit enhanced photocatalytic activity compared with parent KTO toward MB degradation. In particular, Gd-KTO obtained by doping of 0.075 mol% shows the highest photocatalytic activity among the Gd-doped samples and the degradation efficiency of MB was 79% after 180 min of visible light irradiation, which is approximately 1.5 times as high as that by parent KTO (53%). In addition, trapping experiments and electron spin resonance (ESR) analysis demonstrated that the hydroxyl radicals (^?OH) have played a crucial role in the photocatalytic degradation of MB. The reusability and stability of Gd doped-KTO with a Gd content of 0.075 mol% against MB degradation were examined for five cycles. Based on the present study results, a visible light induced photocatalytic mechanism has been proposed for Gd0075-KTO sample.     

Tin mediated Barbier type allylation in ionic liquids

The Barbier type allylation of carbonyl compounds is a useful organic transformation as the resultant homoallylic alcohols are important building blocks for many biologically active molecules. Tin mediated Barbier allylation of different carbonyl compounds in room temperature ionic liquid, [BMIM][BF₄] afforded the corresponding homoallylic alcohols in good to excellent yields. The ionic liquid was successfully recycled and reused in allylation reactions.     

Chiral pool based synthesis of pyrrolidinium ionic liquids

Chiral ionic liquids show promising applications in various different fields. A series of pyrrolidinium-based chiral ionic liquids bearing a chiral cation, a chiral anion or both was prepared in good yields using an efficient, economic and simple pathway. The chirality was introduced using (l)-lactate and (l)-menthol derivatives. The resultant chiral compounds were characterized by both spectroscopy and polarimetry. We envision that these new chiral compounds can serve as effective reaction media and chiral catalysts for asymmetric reactions, which are presently being investigated in our lab.