The impact of monocity and hybridity of nanostructures on the thermal performance of Maxwellian thin-film flow with memory and Darcy–Forchheirmer effects

Journal of Thermal Analysis and Calorimetry - This article considers viscoelastic effects on the enhancement of transportation of heat in thin-film flow when the relaxation time phenomenon is...     

Assessment of the Formant Frequencies in Normal and Laryngectomized Individuals Using Linear Predictive Coding

The objective of this study was to assess the difference in voice quality as defined by acoustical analysis using sustained vowel in laryngectomized patients in comparison with normal volunteers. This was designed as a retrospective single center cohort study. An adult tertiary referral unit formed the setting of this study. Fifty patients (40 males) who underwent total laryngectomy and 31 normal volunteers (18 male) participated. Group comparisons with the first three formant frequencies (F1, F2, and F3) using linear predictive coding (LPC) (Laryngograph Ltd, London, UK) was performed. The existence of any significant difference of F1, F2, and F3 between the two groups using the sustained vowel /i/ and the effects of other factors namely, tumor stage (T), chemoradiotherapy, pharyngectomy, cricothyroid myotomy, closure of pharyngoesophageal segment, and postoperative complication were analyzed. Formant frequencies F1, F2, and F3 were significantly different in male laryngectomees compared to controls: F1 (P<0.001, Mann-Whitney U test), F2 (P<0.001, Student's t test), and F3 (P=0.008, Student's t test). There was no significant difference between females in both groups for all three formant frequencies. Chemoradiotherapy and postoperative complications (pharyngocutaneous fistula) caused a significantly lower formant F1 in men, but showed little effect in F2 and F3. Laryngectomized males produced significantly higher formant frequencies, F1, F2, and F3, compared to normal volunteers, and this is consistent with literature. Chemoradiotherapy and postoperative complications significantly influenced the formant scores in the laryngectomee population. This study shows that robust and reliable data could be obtained using electroglottography and LPC in normal volunteers and laryngectomees using a sustained vowel.     

Pentadienyls vs cyclopentadienyls and reversal of metal-ligand bonding affinity with metal oxidation state: synthesis, molecular structures, and electronic structures of high-valent zirconium pentadienyl complexes

Molecules of the form Cp(6,6-dmch)ZrX(2) (Cp = eta(5)-cyclopentadienyl, X = Cl, Br, I; 6,6-dmch = eta(5)-6,6-dimethylcyclohexadienyl) have been synthesized, and the molecular and electronic structures have been investigated. These molecules allow direct comparison of the bonding and properties of pentadienyl and cyclopentadienyl ligands in the same high-oxidation-state metal complexes. Unlike the well-known Cp(2)ZrX(2) analogues, these Cp(6,6-dmch)ZrX(2) molecules are intensely colored, indicating significantly different relative energies of the frontier orbitals. Also unusual, the average Zr-C distances to the 6,6-dmch pentadienyl ligand are about 0.1 A longer than the average Zr-C distances to the cyclopentadienyl ligand for these Zr(IV) complexes, opposite of what is observed for the Zr(II) complex Cp(2,6,6-tmch)Zr(PMe(3))(2) (tmch = eta(5)-2,6,6-trimethylcyclohexadienyl), reflecting a dramatic reversal in the favorability of the bonding depending on the metal oxidation state. The experimental and computational results indicate that the color of the Cp(6,6-dmch)ZrX(2) complexes is due to a 6,6-dmch ligand-to-metal charge-transfer band. Compared to the Cp(2)ZrX(2) analogues, the Cp(6,6-dmch)ZrX(2) molecules have a considerably less stable HOMO that is pentadienyl-based and an essentially unchanged metal-based LUMO. Also, the lowest unoccupied orbital of pentadienyl is stabilized relative to cyclopentadienyl and becomes a better potential delta electron acceptor, thus contributing to the differences in structure and reactivity of the low-valent and high-valent metal complexes.     

Dynamics of the formation of two-dimensional ordered structures

The growth of ordered domains in lattice gas models, which occurs after the system is quenched from infinite temperature to a state below the critical temperatureT _c, is studied by Monte Carlo simulation. For a square lattice with repulsion between nearest and next-nearest neighbors, which in equilibrium exhibits fourfold degenerate (2×1) superstructures, the time-dependent energy E(t), domain size L(t), and structure functionS(q, t) are obtained, both for Glauber dynamics (no conservation law) and the case with conserved density (Kawasaki dynamics). At late times the energy excess and halfwidth of the structure factor decrease proportional tot ^–x, whileL(t) t ^x, where the exponent x=1/2 for Glauber dynamics and x1/3 for Kawasaki dynamics. In addition, the structure factor satisfies a scaling lawS(k,t)=t ^2xS(kt^x). The smaller exponent for the conserved density case is traced back to the excess density contained in the walls between ordered domains which must be redistributed during growth. Quenches toT>T _c, T=T_c (where we estimate dynamic critical exponents) andT=0 are also considered. In the latter case, the system becomes frozen in a glasslike domain pattern far from equilibrium when using Kawasaki dynamics. The generalization of our results to other lattices and structures also is briefly discussed.     

Sorptive potential of sunflower stem for Cr(III) ions from aqueous solutions and its kinetic and thermodynamic profile

The sorptive potential of sunflower stem (180-300 μm) for Cr(III) ions has been investigated in detail. The maximum sorption (≥85%) of Cr(III) ions (70.2 μM) has been accomplished using 30 mg of high density sunflower stem in 10 min from 0.001 M nitric and 0.0001 M hydrochloric acid solutions. The accumulation of Cr(III) ions on the sorbent follows Dubinin-Radushkevich (D-R), Freundlich and Langmuir isotherms. The isotherm yields D-R saturation capacity X_m = 1.60 ± 0.23 mmol g⁻¹, β = −0.00654 ± 0.00017 kJ² mol⁻², mean free energy E = 8.74 ± 0.12 kJ mol⁻¹, Freundlich sorption capacity K_F = 0.24 ± 0.11 mol g⁻¹, 1/n = 0.90 ± 0.04 and of Langmuir constant K_L = 6800 ± 600 dm³ mol⁻¹ and C_m = 120 ± 18 μmol g⁻¹. The variation of sorption with temperature (283-323 K) gives ΔH = −23.3 ± 0.8 kJ mol⁻¹, ΔS = −64.0 ± 2.7 J mol⁻¹ K⁻¹ and ΔG_298k = −4.04 ± 0.09 kJ mol⁻¹. The negative enthalpy and free energy envisage exothermic and spontaneous nature of sorption, respectively. Bisulphate, Fe(III), molybdate, citrate, Fe(II), Y(III) suppress the sorption significantly. The selectivity studies indicate that Cr(III), Eu(III) and Tb(III) ions can be separated from Tc(VII) and I(I). Sunflower stem can be used for the preconcentration and removal of Cr(III) ions from aqueous medium. This cheaper and novel sorbent has potential applications in analytical and environmental chemistry, in water decontamination, industrial waste treatment and in pollution abatement. A possible mechanism of biosorption of Cr(III) ions onto the sunflower stem has been proposed.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Krasnoselski-Mann type iterative method for hierarchical fixed point problem and split mixed equilibrium problem

In this paper, we suggest and analyze a Krasnoselski-Mann type iterative method to approximate a common element of solution sets of a hierarchical fixed point problem for nonexpansive mappings and a split mixed equilibrium problem. We prove that sequences generated by the proposed iterative method converge weakly to a common element of solution sets of these problems. Further, we derive some consequences from our main result. Furthermore, we extend the considered iterative method to a split monotone variational inclusion problem and deduce some consequences. Finally, we give a numerical example to justify the main result. The method and results presented in this paper generalize and unify the corresponding known results in this area.     

The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system

This pilot study elaborates the development of novel epoxy/electrospun polylactic acid (PLA) nanofiber composites at the fiber contents of 3, 5, and 10 wt % to evaluate their mechanical and thermal properties using flexural tests and differential scanning calorimetry (DSC). The flexural moduli of composites increase remarkably by 50.8 and 24.0% for 5 and 10 wt % fiber contents, respectively, relative to that of neat epoxy. Furthermore, a similar trend is also shown for corresponding flexural strengths being enhanced by 31.6 and 4.8%. Fractured surface morphology with scanning electron microscopy (SEM) confirms a full permeation of cured epoxy matrix into nanofiber structures and existence of nondestructive fibrous networks inside large void cavities. The glass transition temperature (T_g) of composites increases up to 54–60 °C due to embedded electrospun nanofibers compared to 50 °C for that of epoxy, indicating that fibrous networks may further restrict the intermolecular mobility of matrix in thermal effects. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 618–623     

Complete NMR assignments of bioactive rotameric (3 → 8) biflavonoids from the bark of Garcinia hombroniana

The genus Garcinia is reported to possess antimicrobial, anti‐inflammatory, anticancer, hepatoprotective and anti‐HIV activities. Garcinia hombroniana in Malaysia is used to treat itching and as a protective medicine after child birth. This study was aimed to isolate the chemical constituents from the bark of G. hombroniana and explore their possible pharmacological potential. Ethyl acetate extract afforded one new (1) and six (2–7) known 3 → 8 rotameric biflavonoids. Their structures were elucidated by UV, IR and NMR (1D and 2D) spectroscopy together with electron ionization/ESI mass spectrometric techniques and were identified as (2R, 3S) volkensiflavone‐7‐O‐rhamnopyranoside (1), volkensiflavone (2), 4″‐O‐methyl‐volkensiflavone (3), volkensiflavone‐7‐O‐glucopyranoside (4), morelloflavone (5), 3″‐O‐methyl‐morelloflavone (6) and morelloflavone‐7‐O‐glucopyranoside (7). The absolute configuration of compound 1 was assigned by circular dichroism spectroscopy as 2R, 3S. The coexistence of conformers of isolated biflavonoids in solution at 25 °C in different solvents was confirmed by variable temperature NMR studies. At room temperature (25 °C), compounds 1–7 exhibited duplicate NMR signals, while at elevated temperature (90 °C), a single set of signals was obtained. Compound 5 showed significant in vitro antioxidant activities against 1,1‐diphenyl‐2‐picrylhydrazyl and 2,2′‐azino‐bis‐3‐ethyl benzthiazoline‐6‐sulfonic acid radicals. The antibacterial studies showed that compounds 5 and 6 are the most active against Staphylococcus aureus, Bacillus subtilis and Escherichia coli. Compounds 3 and 6 also showed moderate antituberculosis activity against H₃₈Rv. Based on the research findings, G. hombroniana could be concluded as a rich source of flavanone–flavone (3 → 8) biflavonoids that exhibit rotameric behaviour at room temperature and display significant antioxidant and antibacterial activities. Copyright © 2014 John Wiley & Sons, Ltd.     

Estimating Individual Treatment Effect in Observational Data Using Random Forest Methods

Estimation of individual treatment effect in observational data is complicated due to the challenges of confounding and selection bias. A useful inferential framework to address this is the counterfactual (potential outcomes) model, which takes the hypothetical stance of asking what if an individual had received both treatments. Making use of random forests (RF) within the counterfactual framework we estimate individual treatment effects by directly modeling the response. We find that accurate estimation of individual treatment effects is possible even in complex heterogenous settings but that the type of RF approach plays an important role in accuracy. Methods designed to be adaptive to confounding, when used in parallel with out-of-sample estimation, do best. One method found to be especially promising is counterfactual synthetic forests. We illustrate this new methodology by applying it to a large comparative effectiveness trial, Project Aware, to explore the role drug use plays in sexual risk. The analysis reveals important connections between risky behavior, drug usage, and sexual risk. Supplementary material for this article is available online.