Totally geodesic Riemannian foliations with locally symmetric leaves

We prove the arithmeticity of totally geodesic Riemannian foliations, with a dense leaf, on complete finite volume Riemannian manifolds when the leaves are isometrically covered by an irreducible symmetric space of noncompact type and rank at least 2. To cite this article: R. Quiroga-Barranco, C. R. Acad. Sci. Paris, Ser. I 342 (2006).     

Modification of a three-way catalyst washcoat by aging: A study along the longitudinal axis

This work reports the research carried out by studying aliquots extracted at different axial coordinates from Three Way Catalyst (TWC) monoliths aged under real traffic conditions. Our study focused on the catalytic properties and on several chemical and physical effects caused in the Front and Rear monolith washcoat surfaces by vehicle aging after 60,000 km. Regarding the catalytic properties, all the used aliquots showed poorer activity than their corresponding fresh counterparts. The strongest deactivation was detected for NO and hydrocarbon conversion. CO conversion was less affected and the Rear monolith was as deactivated as the Front one. The characterisation techniques (TXRF, N₂ adsorption-desorption isotherms, XRD and H₂-TPR) detected - (i) the deposition of P, Zn and Pb; (ii) the formation of CePO₄ on account of the Ce from the washcoat; (iii) thermal sintering; (iv) inhibition of the reducibility of Ce oxides - as the main effects brought about by vehicle aging conditions. The deactivation observed at the beginning of the Front monolith was the result of a combination of the former effects. When moving downstream to higher axial coordinates, Pb accumulation and the loss of specific area appeared to be the only probable sources of deactivation.     

Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Asymmetric zirconocene precursors for catalysis of propylene polymerization

Racemic isopropylidene (1-η⁵-cyclopentadienyl)(1-η⁵-indenyl) dichlorozirconium and the 3-methylindenyl derivative have been synthesized and characterized. These precursors activated with methylaluminoxane produce poly(propylene) with hemiisotactic microstructures. © 1994 John Wiley & Sons, Inc.     

Pt- (and Co-) Promoted Molybdena-Alumina Catalysts: Analysis of the Impregnation Steps

The equilibrium parameters for the adsorption of Mo(VI) on gamma-Al(2)O(3) and of Co(II) and Pt(IV) on MoO(3)/gamma-Al(2)O(3) were determined. The adsorption isotherms were performed from aqueous solutions of the corresponding precursors on two different alumina supports. According to the classification given by Giles, L-type-shaped, subgroup 2, adsorption curves were found for the system Mo on gamma-Al(2)O(3), L-type, subgroup 1, for the Pt on MoO(3)/gamma-Al(2)O(3), and S-type for Co on the MoO(3)/gamma-Al(2)O(3) system. Numerical calculations were carried out for all the isotherms to find the equilibrium parameters. These constants are being used to model the development of Pt, Co, and Mo profiles on MoO(3)/gamma-Al(2)O(3) or gamma-Al(2)O(3) extrudates, respectively, which belong to the new generation of noble-metal-MoO(3)/gamma-Al(2)O(3)-supported catalysts to be used in oil-refining processes. Copyright 2001 Academic Press.     

Electron Probe Microanalysis of HfO2 Thin Films on Conductive and Insulating Substrates

Quantitative electron probe microanalysis of highly insulating materials is a complicated problem, partially solved by coating samples with grounded thin conductive layers or using novel scanning electron microscopy (SEM) techniques, such as low-voltage and/or variable pressure SEM. In this work, some problems of quantitative X-ray microanalysis of thin HfO₂ films, in particular the possibility to determine mass thickness correlated to the density of the layer material, are discussed. For comparison, Al₂O₃, Ta₂O₅ and TiO₂ films grown onto both semiconductive Si and insulating quartz substrates were also analysed. All the films studied were synthesized by atomic layer deposition method.     

Surface structure of γ-Alumina-Supported Ruthenium Catalysts for ammonia synthesis

Ruthenium supported catalysts were prepared by impregnation of RuCl₃ · 3 H₂O and K₄[Ru(CN)₆] · 3 H₂O aqueous acetone solutions upon several acid(base)-modified γ-Al₂O₃ samples. Characterization of the catalysts was carried out by CO chemisorption and kinetics of hydrogen reduction, correlating the particle size and dispersion of the metallic phase with the previous acid modification of the γ-Al₂O₃, as well as with the type of precursor and solvent used. The surface properties were also correlated with their catalytic activities for ammonia synthesis at atmospheric pressure and 583 K (N₂/H₂ ? 1/3).     

Polyfluorothiolate derivatives of rhodium(I). Crystal and molecular structure of [Rh(μ-SC6HF4)(C8H12)]2

Summary The thiolato-bridged dinuclear compounds [Rh(-SR)-(COD)]₂, where R=p-C₆HF₄ (1),p-C₆H₄F (2) and CF₃ (3), are obtained from the chloro-bridged analogue by ligand exchange.Compound (1) crystallizes in the space group P₁ with a=9.740(3)Å, b=11.642(4)Å, c=13.997(6)Å, =103.87(3)°, =106.98(3)° and =105.10(2)°; z=2. In this dinuclear molecule both Rh atoms have a square planar coordination sharing one edge, namely the two sulphur bridging atoms. The Rh—Rh separation of 2.96 Å is consistent with at most a very weak metal-metal interaction. Upon addition of CO the dimeric [Rh(-SR)(CO)₂]₂ (4), (5) and (6) are obtained, but addition of PPh₃ affords the monomeric species [Rh(SR)(PPh₃)-(COD)] (7), (8) and (9). Reactions of the dimeric tetracarbonyl derivatives with PPh₃ vary with the nature of R; [Rh(-SR)(PPh₃)(CO)]₂ is obtained when R=p-C₆H₄F (10) and CF₃ (11) but monomeric [Rh(SR)-(PPh₃)(CO)₂] (12) is produced when R=p-C₆HF₄. The latter mononuclear compounds, with R=p-C₆H₄F (13) and CF₃ (14), are also formed by reaction of [Rh(SR)-(PPh₃)(COD)] with CO.     

Evolution of self-assembled silica-tetrapropylammonium nanoparticles at elevated temperatures

The time evolution of silica nanoparticles in solutions of tetrapropylammonium (TPA) has been studied using a combination of small-angle scattering, conductivity, and pH measurements to provide the first comprehensive analysis of nanoparticle structural and compositional changes at elevated temperatures. We have found that silica-TPA nanoparticles subjected to hydrothermal treatment (70-90 degrees C) grow via an Ostwald ripening mechanism with growth rates that depend on both pH and temperature. Small-angle X-ray (SAXS) and neutron (SANS) scattering confirm that the core-shell structure of the particles, initially present at room temperature, is maintained during heating, but an evolution toward sphericity is evidenced especially at high values of pH. SAXS absolute intensity calculations were utilized to calculate the changes in nanoparticle composition and concentration over time. These changes along with the conductivity and pH measurements and SANS contrast matching studies indicate that, upon heating, TPA becomes embedded in the core of nanoparticles giving rise to more zeolitic-looking nanomaterials.