Based on MFe2O4 (M=Co,Cu, and Ni): Magnetically recoverable nanocatalysts in synthesis of heterocyclic structural scaffolds

Abstract

Catalysis research under magnetically recoverable nanocatalysts is a well-known topic in organic synthesis. In recent times, catalysis research has clearly experienced a renaissance in the area of utility of ferrite nanoparticles based on their ability to recovery and reusability. In this review, the focus is on the fabrication, characterization and of application the MFe₂O₄ (M=Co, Cu, and Ni) nanocatalysts in synthesis of heterocyclic structural scaffolds.     

Magnetically reusable nanocatalysts in biginelli synthesis of dihydropyrimidinones (DHPMs)

Abstract

Molecules containing dihydropyrimidinone (DHPMs) structures are very important in pharmaceutical and medicinal chemistry due to their excellent biological activities application in synthesis of natural products. Biginelli condensation reaction between an aldehyde, urea/thiourea and a carbonyl compound is the most popular strategy for the synthesis of dihydropyrimidinones. Magnetic recoverable nanocatalysts can be readily separated from reaction medium by using an external magnet, without the need for filtration, centrifugation or other tedious workup processes. In recent times, the catalytic potential of magnetically recoverable nanocatalysts was evaluated in a variety of Biginelli reactions. In this review, we focus on the application of magnetically recoverable gold nanocatalysts in Biginelli synthesis of dihydropyrimidinone derivatives.     

SOLVENT-FREE CONVERSION OF OXIRANES TO THIIRANES WITH THIOUREA

A simple and efficient method for the conversion of various oxiranes to the corresponding thiiranes using thiourea under solvent free conditions is described.     

Highly Regio- and Stereoselective Synthesis of β-Halohydrins from Epoxides Catalyzed with Ceric Ammonium Nitrate

Ce(IV) as ceric ammonium nitrate can effectively catalyze ring opening of epoxides with halides under very mild conditions and easy procedure to give the corresponding β-chloro-and β-bromohydrins in excellent yields. The reactions occur with both substituted and unsubstituted quaternary ammonium halides and with high regio- and stereoselectivity. The reaction of optically active styrene oxide with chloride ion was found to be highly stereospecific and afforded the corresponding β-halohydrin in 96% ee.     

Separation of Cd(II) and Ni(II) ions by supported liquid membrane using D2EHPA/M2EHPA as mobile carrier

The separation of Cd(II) and Ni(II) ions was studied in an aqueous sulphate medium using supported liquid membrane (SLM). D2EHPA/M2EHPA was used as a mobile carrier, microporous hydrophobic PTFE film was used as a solid support for the liquid membrane, and the strip phase was sulphuric acid. The effects of different parameters such as feed concentration, carrier concentration, feed phase pH, and strip phase pH on the separation factor and flux of Cd(II) and Ni(II) ions were studied. The optimum values obtained to achieve the maximum flux were 5.0 for feed pH, 40 vol. % for D2EHPA/M2EHPA concentration in the membrane phase, 0.5 for strip pH, and 0.012 mass % for feed concentration. Under these optimum conditions, the flux values of Cd(II) and Ni(II) were 15.7 × 10^?7 kg m^?2 s^?1 and 2.6 × 10^?7 kg m^?2 s^?1, respectively. The separation factors of Cd(II) over Ni(II) were studied under different experimental conditions. At a carrier concentration of 10 vol. % and feed concentration of 0.012 mass %, the maximum value of 185.1 was obtained for the separation factor of Cd(II) over Ni(II). After 24 h, the percentages of the extracted Cd(II) and Ni(II) were 83.3 % and 0.45 %, respectively.     

STABILITY ANALYSIS OF A CAPACITIVE FGM MICRO-BEAM USING MODIFIED COUPLE STRESS THEORY

Based on the Modified Couple Stress Theory,a functionally graded micro-beam under electrostatic forces is studied.The FGM micro-beam is made of two materials and material properties vary continuously along the beam thickness according to a power-law.Dynamic and static pull-in voltages are obtained and it is shown that the static and dynamic pull-in voltages for some materials cannot be obtained using classic theories and components of couple stress must be taken into account.In addition,it is shown that the values of pull-in voltages depend on the variation through the thickness of the volume fractions of the two constituents.     

Measurement of thermal lensing effects in high power thin disk laser

Two different experimental methods for disk characterization in thin disk lasers are investigated in this paper. First method is based on the stability regions in optical resonator and the second method is based on using an expanded probe beam. Both of the mentioned techniques are used to determine the thermal lensing effects in high power thin disk laser. The results of the experiments are presented and analyzed. Also the advantages and disadvantages of each method are explained.     

Quenching effect of l-tyrosine on peroxyoxalate chemiluminescence of berberine as the fluorophore

The present work deals with the first attempt to study the effect of l-tyrosine on the characteristics of the peroxyoxalate chemiluminescence. Berberine was applied as an efficient fluorophore. The investigated parameters include rise and fall rate constant for the chemiluminescence burst, theoretical and experimental maximum intensity, the time needed to reach maximum intensity and the total light yield emission, which is theoretically evaluated using the pooled intermediate model by a computerized non-linear least-squares curve fitting program (KINFIT). Furthermore, based on the observed quenching effect of tyrosine, the Stern–Volmer plot with K _Q value of 7.7 × 10⁴ M^?1 in the quencher concentration range 4 × 10^?6–5 × 10^?5 M. Moreover, this method is applied to determinate tyrosine in biological samples successfully.