T1Effects in Sequential Dynamic Susceptibility Contrast Experiments

Residual effects of an initial bolus of gadolinium contrast agent have been previously demonstrated in sequential dynamic susceptibility contrast MR experiments. While these residual effects quickly reach a saturation steady state, their etiology is uncertain, and they can lead to spurious estimates of hemodynamic parameters in activation experiments. The possible influence ofT₁effects is now investigated with experiments in whichT₁weighting is varied as well as with serial regionalT₁measurements. Little evidence for significant residualT₁effects is found, suggesting instead that susceptibility effects underlie these observations. An initial saturation dose of contrast agent minimizes this effect.     

Two-photon laser spectroscopy of the muonium 1S–2S transition

The 1² S _1/2(F=1)?2² S _1/2(F=1) energy interval in muonium has been investigated by Doppler-free two-photon laser spectroscopy. The transition was observed by uniquely identifying and counting the muons released after the photoionization of the 2S state by the same laser field. The measured transition frequency of 2455 528016(58)(43) MHz is in good agreement with QED calculations. The experiment can be interpreted as a test of the Lamb shift contributions at the 1% level. The method is also well suited for a precise determination of the mass of the positive muon in a muoniumhydrogen isotope shift measurement.     

Systematic computer-aided interpretation of vibrational spectra

The diagnostic value of an interpretation system for vibrational spectra has been investigated in relation to the number of structural units the system can cope with. For five structural units the correlated wavenumber intervals are derived from three infrared and three Raman files by the CRISE program. The interpretative value of each interval in relation to the intensity threshold is discussed. For most intervals a decrease is found on increasing the number of structural units.     

Systematic computer-aided interpretation of infrared and raman vibrational spectra based on the crise program

The CRISE computer program is used to correlate wavenumber regions and 6 structural elements containing carbon, hydrogen and oxygen on the basis of 2 standard files with 549 infrared and Raman spectra. The degree of correlation, including score percentages and interfering percentages, is established for different types of intervals in relation to various intensity thresholds. Specific regions (score 100%, interference 0%) proved to be rare, whereas pseudo-specific regions (score < 100%, interference 0%) are normally present. The usefulness of selective regions (score 100%, interference > 0%) is doubtful. The infrared and Raman results for a structural element can differ appreciably, yet neither technique is clearly superior for interpretative purposes.     

Method development for the quantitation of ABT-578 in rabbit artery tissue by 96-well liquid-liquid extraction and liquid chromatography/tandem mass spectrometric detection

Quantitative determination of drug concentrations in tissue samples can provide critical information for drug metabolism, kinetics, and toxicity evaluations. For analysis of tissue samples using liquid chromatography/tandem mass spectrometric (LC/MS/MS) detection, homogenization is a critical step in achieving good assay performance. Assay performance can be closely evaluated by spiking the drug directly into tissue samples prior to homogenization. It is especially important to include this assay evaluation for the analysis of artery tissue samples because artery tissue is very elastic, making it quite a challenge to develop an effective procedure for homogenization. An LC/MS/MS assay in 96-well format using liquid-liquid extraction was developed for analyzing ABT-578 in rabbit artery samples. Tissue quality control samples were prepared by spiking ABT-578 stock solutions directly into the tissue before homogenization. The usage of the tissue control samples gives a thorough evaluation of the sample preparation process that includes both homogenization and sample extraction. A 20% blood in saline solution was used as a homogenization solution. Calibration standards were made by spiking ABT-578 into rabbit whole blood. Blood quality control samples were also prepared by spiking ABT-578 into rabbit whole blood. These blood QC samples were used to confirm the validity of the calibration curve. A lower limit of quantitation of 0.050 ng/mL was achieved. The linear dynamic range of blood standards was from 0.050-30.3 ng/mL with the correlation coefficient (r) ranging from 0.9969-0.9996. Overall %CV was between 1.3 and 7.0%, and analytical recovery was between 98.2 and 105.8% for blood QC samples. The %CVs for tissue QC samples were between 6.7 and 13.0%, and analytical recovery after correction was between 93.5 and 114.3%.     

Synthesis of pyrimidines from 3-trifluoromethylsulfonyl-oxypropeniminium triflates and nitriles; molecular and crystal structure of the 1:1 and 1:2 Adducts of a 4-(2-diethylaminovinyl)pyrimidine with triflic acid

The 3-trifluoromethylsulfonyloxy-1-hexeniminium triflate 1 reacts with two equivalents of an aliphatic nitrile or of benzonitrile to give the 4-(2-diethylaminovinyl)pyrimidinediium bis(triflates) 4 , which can be deprotonated to give the monoprotonated or neutral pyrimidines 5 and 6 , respectively. When the related 1-phenyl-substituted iminium salt 7 is heated in acetonitrile at 140°, 1,5-cyclization of the cation leading to indane derivative 8 competes with formation of the pyrimidinium salt 9 . X-ray crystal structure determination reveals significant differences in the bond lengths of mono-and diprotonated 4-(2-diethylaminovinyl)pyrimidines 5a and 4a .     

Die Kristall- und Molekülstruktur von μ-5-Pyrimidincarboxylato (O,O′)-di-μ-hydroxo-bis[triamminkobalt(III)]perchlorat

Crystal and Molecular Structure of μ-5-Pyrimidinecarboxylato(O,O′)-di-μ-hydroxo-bis-[triamminecobalt(III)]perchlorate μ-5-Pyrimidinecarboxylato(O,O′)-di-[μ-hydroxo-bis(triamminecobalt)(III)]perchlorate, [(NH₃)₃Co-μ(OH, OH, C₅H₄N₂O₂)Co(NH₃)₃](ClO₄)₄, crystallizes in the orthorhombic space group Ibca with a = 12.686, b = 13.079, c = 31.785 Å and Z = 8 formula units. The complex cation adopts C₂ symmetry, but no mirror plane is present. The Co? Co separation in the binuclear complex is 2.794 Å. The four-membered ring defined by the two Co atoms and the bridging oxygens is folded along the O? O axis, the interplanar angle being 154°. One of the ClO₄ tetrahedra is disordered over two sites in the crystal.     

Artificial intelligence for the interpretation of combined spectral data : Design and development of a spectrum interpreter

The design of a knowledge-based system for the interpretation of combined spectral data for structure elucidation (EXSPEC) is described. Some basic design features are discussed and the functioning of the knowledge base, inference mechanism and user-interface is outlined. Attention is focussed on the development of a spectrum interpreter for infrared and mass spectral data. Interpretation of spectra for 120 liquid alcohols used for rule generation was successful. The system can be run on a Macintosh II or, more slowly, on a Macintosh Plus.     

The synthesis of some substituted macrocyclic ether-ester compounds

A series of macrocyclic ether-esters has been prepared by treating various glycols with adipoyl chloride and various substituted malonyl, succinyl and glutaryl chlorides. The prepared compounds include: 15-ethyl- and 15-phenyl-1,4,7,10,13-pentaoxacyclohexadecane-14,16-dione (5 and 6); 15-methyl-, 15-phenyl-, cis-cyclohexo-[o]-and benzo-[o]-1,4,7,10,13-pentaoxacycloheptadecane-14,17-dione (7–10); trans,trans-1,4,7,10,13,18,21,24,27,30-de-caoxacyclotetratriacontane-15, 32-diene-14,17,31,34-tetraone (11); 1,4,7,10,13-pentaoxacyclooctadecane-14,18-dione (12); 15,15,16,16,17,17-hexafluoro- and 16-methyl-1,4,7,10,13-pentaoxacyclooctadecane-14,18-dione (13 and 14); 1,4,7,10-tetraoxacyclohexadecane-11,16-dione (15); and 1,4,7,10,13-pentaoxacyclononadecane-14,19-dione (16).     

Electron binding energies of aqueous alkali and halide ions: EUV photoelectron spectroscopy of liquid solutions and combined ab initio and molecular dynamics calculations

Photoelectron spectroscopy combined with the liquid microjet technique enables the direct probing of the electronic structure of aqueous solutions. We report measured and calculated lowest vertical electron binding energies of aqueous alkali cations and halide anions. In some cases, ejection from deeper electronic levels of the solute could be observed. Electron binding energies of a given aqueous ion are found to be independent of the counterion and the salt concentration. The experimental results are complemented by ab initio calculations, at the MP2 and CCSD(T) level, of the ionization energies of these prototype ions in the aqueous phase. The solvent effect was accounted for in the electronic structure calculations in two ways. An explicit inclusion of discrete water molecules using a set of snapshots from an equilibrium classical molecular dynamics simulations and a fractional charge representation of solvent molecules give good results for halide ions. The electron binding energies of alkali cations computed with this approach tend to be overestimated. On the other hand, the polarizable continuum model, which strictly provides adiabatic binding energies, performs well for the alkali cations but fails for the halides. Photon energies in the experiment were in the EUV region (typically 100 eV) for which the technique is probing the top layers of the liquid sample. Hence, the reported energies of aqueous ions are closely connected with both structures and chemical reactivity at the liquid interface, for example, in atmospheric aerosol particles, as well as fundamental bulk solvation properties.