Determination of uranium and thorium isotopes in soil samples by coprecipitation

Summary The paper presents a procedure to prepare soil samples for U and Th isotope measurement by alpha-spectrometry after coprecipitation with LaF₃. In this procedure the reduction of U(VI) to U(IV) was performed by Zn metal in 4M HCl solution. The recoveries of chemical separation equal to e_U-chemistry = 78±4% for uranium and e_Th-chemistry = 82±4% for thorium. Canberra alpha-spectrometer was used with PIPS detectors of A-1200-37-AM Model of 1200 mm² active area. The counting efficiency of the measuring system equals to e_counting = 18% and the total efficiencies were e_U = e_counting ^.e_U-chemistry = 14.0±0.7% for uranium and e_Th = e_counting ^.e_Th-chemistry = 14.7±0.7% for thorium. The recoveries of chemical separation were rather high (about 80%), that leads to the use of a small weight of soil sample (about 0.5 g). The efficiencies were also stable, that allows analyzing the soil sample without using radiotracers. They are advantages of the sample preparation procedure of this work.     

Reactions de photoaddition de benzo[b]selenophenes avec l'acetylene dicarboxylate de methyle et avec le dichloro-1,2 ethylene

Photoirradiated in presence of acetophenone, benzo[b]selenophene and its 3-methyl derivative add to dimethyl acetylenedicarboxylate. In each ease, the primary reaction product is unstable and has not been isolated. Photoexeited in its triplet state (the energy of which is in the neighbourhood of 69 $\text{kcal}\text{mole}$) benzo[b]selenophene and its 2- and 3-methyl, 2,3 dimethyl, 3 acetoxy and 2-methyl-3-acetoxy derivatives add to 1,2 dichloroethylene leading to cyclobutanes. Neither cyclo-addition occurs in absence of photosensitiser. Single-crystal X-ray analysis gave the structures of the two adducts of 3-acetoxybenzo[b]selenophene with trans-1,2-dichloroethylene. In both compounds the chlorine atoms are trans.     

Effect of copper impurity on the edge emission of ZnTe crystals

The results are given of studies on the edge emission of undoped and copperdoped ZnTe crystals in the temprature range 4.2–300K. The copper impurity has been found to increase the intensity of the principal edge emission band substantially. Analysis of the structure of this emission band indicated that a temprature below 160K the main role is played by the emission from excitons that are most probably bound in Cu_Zn and Li_Zn centers while at higher temperatures it is played by emission during the transition of free electrons to these centers. An appreciable role is played over the entire range of temperatures by emission from free electrons with an energy of 13 MeV. The luminescence quenching energy below 160 K has a value of 7 MeV (the binding energy of a bound exciton) and at higher temperatures it is 78 MeV.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 8, pp. 68–73, August, 1987.     

Stoichiometry-dependent formation of quantum dot-antibody bioconjugates: a complementary atomic force microscopy and agarose gel electrophoresis study

The unique advantages of quantum dot (QD) bioconjugates have motivated their application in biological assays. However, physical characterization of bioconjugated QDs after surface modification has often been overlooked. Here, biotinylated antibodies (biotin-IgG) were attached to commercial streptavidin-conjugated quantum dots (strep-QDs) at different stoichiometric ratios, and these QD bioconjugates were characterized with atomic force microscopy and discontinuous sodium dodecyl sulfate agarose gel electrophoresis (SDS-AGE). The results from these complementary analytical techniques showed that the molar ratio determined the relative sizes, molecular weights and morphologies of the QD bioconjugates. Additionally, the novel discontinuous SDS-AGE analysis confirmed specific binding between biotin-IgG and strep-QDs. Researchers who design QD bioconjugates for cell-based assays should consider stoichiometry-dependent differences in the physical properties of their QD bioconjugates.     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

Polymer-protected palladium nanoparticles. Morphologies and catalytic selectivities

Colloidal palladium nanocatalysts prepared by in situ reductions of palladium chloride were immobilized and protected by either of two water-soluble polymers. The particle sizes and size distributions of the palladium colloids were determined by transmission electron microscopy. Their selectivities as catalysts were determined by comparing the extents of hydrogenation of carefully chosen pairs of small-molecule olefins. There was found to be high hydrogenation selectivity with regard to cyclic vs. noncyclic olefins. Selectivity was relatively low, however, among olefins that differed only in size (such as hexene vs. octene), or olefins differing only with regard to the positions of the double bonds (such as 1-octene vs. 3-octene). Selectivity could be improved by careful choice of the immobilizing polymer, and by its use at relatively high concentrations.     

Separation of peptides and proteins by capillary electrophoresis using acidic buffers containing tetraalkylammonium cations and cyclodextrins

A method for improving separations of peptides and other positively charged species in capillary zone electrophoresis with untreated capillaries using acidic buffers containing tetraalkylammonium cations is described. Tetramethylammonium and tetrabutylammonium cations dynamically modify the capillary surface, leading to a reversal in the direction of the electroosmotic flow. As a result, the adsorption of positively charged peptides and proteins is minimized, and resolution and peak capacity are improved as the migration of cationic analytes is counterbalanced by the electroosmotic flow. The combining effect of reversing electroosmotic flow and cyclodextrin inclusion complexation on separations of closely related peptides and a protein mixture, as well as tryptic digest of hemoglobin is demonstrated.     

Natural anti-HIV agents. Part 3: Litseaverticillols A-H, novel sesquiterpenes from Litsea verticillata

Bioassay directed-fractionation led to the identification of litseaverticillols A-H (1-8) from the leaves and twigs of Litsea verticillata Hance. These new sesquiterpenes possess a unique skeleton that was recently designated as ‘litseane’. The structures of these compounds were determined by spectroscopic means including 1D and 2D NMR data. Structural configurations were determined by ROESY experiments. Mosher ester reactions and optical rotation measurements established the sesquiterpenes 1-8 as racemates. Isolates 1-8 inhibited HIV-1 replication in HOG.R5 cells with IC₅₀ values ranging from 2 to 15 μg/ml (8-58 μM) while affecting the growth of HOG.R5 at concentrations 2-3-fold higher. Based on this data, structure-activity relationships can be discerned, suggesting compounds of this class are good candidates for analog production.