Collisions at thermal energy between metastable hydrogen atoms and hydrogen molecules: total and differential cross sections

A metastable hydrogen (deuterium) atom source in which groundstate atoms produced by a RF discharge dissociator are bombarded by electrons, provides a relatively large amount of slow metastable atoms (velocity 3–5 km/s). Total integral cross sections for H*(D*)(2s) + H₂(X ¹Σ _g ⁺ ,v=0) collisions have been measured in a wide range of relative velocity (2,5–30 km/s), by using the attenuation method. A significant improvement of accuracy is obtained, with respect to previous measurements, at low relative velocities. Total cross sections for H* and D*, as functions of the relative velocity, are different, especially in the low velocity range. H* + H₂ total differential cross sections have also been measured, with an angular spread of 3.6°, for two different collision energy distributions, centered respectively at 100 meV and 390 meV. A first attempt of theoretical analysis of the cross sections, by means of an optical potential, is presented.     

Micro-rheology of dense particulate flows: Application to immersed avalanches

We rely here on a non-smooth contact dynamics (NSCD) approach to treat particle collisions in a direct numerical simulation of a dense particulate flow. Interactions between particles are considered by a non-smooth formulation of particle dynamics at the microscopic scale, which enables one to straightforwardly implement complex contact laws. The hydrodynamic coupling is achieved by a distributed Lagrange multiplier/fictitious domain (DLM/FD) method. As a preliminary step, the relevance of our NSCD-DLM/FD method is assessed by comparing results of 2D sedimentation simulations with those obtained with a usual molecular dynamics collision model. Then, we use it to investigate how a fully immersed granular packing collapses depending on its initial particle volume fraction, providing clues on the micro-rheology of dense particulate flows.     

Production of a bose einstein condensate of metastable helium atoms

We recently observed a Bose-Einstein condensate in a dilute gas of ⁴He in the 2³S₁ metastable state. In this article, we describe the successive experimental steps which led to the Bose-Einstein transition at 4.7 μK: loading of a large number of atoms in a MOT, efficient transfer into a magnetic Ioffé-Pritchard trap, and optimization of the evaporative cooling ramp. Quantitative measurements are also given for the rates of elastic and inelastic collisions, both above and below the transition. Received 15 October 2001     

Comparative study of the adsorption performance of an active multi-sorbent bed tube (Carbotrap, Carbopack X, Carboxen 569) and a Radiello(®) diffusive sampler for the analysis of VOCs

A simple comparison is made to evaluate the relative performance of active and passive sampling methods for the analysis of volatile organic compounds (VOCs) in ambient air. The active sampling is done through a multi-sorbent bed tube (Carbotrap, Carbopack X, Carboxen 569) created in our laboratory and the passive sampling through the Radiello^® diffusive sampler specified for thermal desorption (filled with Carbograph 4). Daily duplicate samples of multi-sorbent bed tubes were taken during a period of 14 days. During the same period of time, quadruplicate samples of Radiello^® tubes were taken during 3 days, 4 days, 7 days and 14 days. The sampling was carried out indoors during the months of February and March 2010 and outdoors during the month of July 2010 in La Canonja (Tarragona, Spain). The analysis was performed by automatic thermal desorption (ATD) coupled with capillary gas chromatography (GC)/mass spectrometry detector (MSD). The analytical performance of the two sampling approaches was evaluated by describing several quality assurance parameters. The results show that the analytical performances of the methodologies studied are quite similar. They display low limits of detection, good precision, accuracy and desorption efficiency, and low levels of breakthrough for multi-sorbent bed tubes. However, the two monitoring methods produced varying air-borne concentration data for most of the studied compounds, and the Radiello^® samplers generally gave higher results. Sampling rates (Q_k) were determined experimentally, and their values were higher than those supplied by the producer. As the experimental calculation of Q_k values is generally carried out by the suppliers in exposure chambers with only the target compounds present in the air samples, as well as in concentrations dissimilar to those found in ambient air, the use of constant settled Q_k can lead to inaccurate results in complex samples.     

Improved protein identification efficiency by mass spectrometry using N-terminal chemical derivatization of peptides from Angiostrongylus costaricensis, a nematode with unknown genome

Matrix-assisted laser desorption ionization (MALDI), Peptide Mass Fingerprinting (PMF) and MALDI-MS/MS ion search (using MASCOT) have become the preferred methods for high-throughput identification of proteins. Unfortunately, PMF can be ambiguous, mainly when the genome of the organism under investigation is unknown and the quality of spectra generated is poor and does not allow confident identification. The post-source decay (PSD) fragmentation of singly charged tryptic peptide ions generated by MALDI-TOF/TOF typically results in low fragmentation efficiency and/or complex spectra, including backbone fragmentation ions (series b and y), internal fragmentation etc. Interpreting these data either manually and/or using de novo sequencing software can frequently be a challenge. To overcome this limitation when studying the proteome of adult Angiostrongylus costaricensis, a nematode with unknown genome, we have used chemical N-terminal derivatization of the tryptic peptides with 4-sulfophenyl isothiocyanate (SPITC) prior to MALDI-TOF/TOF MS. This methodology has recently been reported to enhance the quality of MALDI-TOF/TOF-PSD data, allowing the obtainment of complete sequence of most of the peptides and thus facilitating de novo peptide sequencing. Our approach, consisting of SPITC derivatization along with manual spectra interpretation and Blast analysis, was able to positively identify 76% of analyzed samples, whereas MASCOT analysis of derivatized samples, MASCOT analysis of nonderivatized samples and PMF of nonderivatized samples yielded only 35, 41 and 12% positive identifications, respectively. Moreover, de novo sequencing of SPITC modified peptides resulted in protein sequences not available in NCBInr database paving the way to the discovery of new protein molecules.     

Penning collisions of laser-cooled metastable helium atoms

We present experimental results on the two-body loss rates in a magneto-optical trap of metastable helium atoms. Absolute rates are measured in a systematic way for several laser detunings ranging from -5 to -30 MHz and at different intensities, by monitoring the decay of the trap fluorescence. The dependence of the two-body loss rate coefficient β on the excited state ( 2³ P ₂) and metastable state ( 2³ S ₁) populations is also investigated. From these results we infer a rather uniform rate constant K _sp = (1±0.4)×10^-7 cm³/s. Received 8 September 2000 and Received in final form 19 December 2000     

Reduction of n-(1,3-dioxolan-2-yl)-1-methylpyridinium ions: Molecular structure of the 4-(l,3-dioxolan-2-yl)-1-methyl-1,2,3,6-tetrahydropyridine-borane complex

The reduction of the n-(1,3-dioxolan-2-yl)-1-methylpyridinium ions with sodium borohydride has been studied to prepare N-methylformylpiperidines. Deuterium oxide was used as the solvent in order to assign the protons in the nmr spectra. As a product of the reaction, the 4-(1,3-dioxolan-2-yl)-1-methyl-1,2,3,6-tetrahy-dropyridine-borane complex, was isolated and crystallized. A X-ray study of this borane complex has been carried out.     

Convergent stereocontrol in peterson olefinations. Application to the synthesis of (+/-)-3-hydroxybakuchiol and corylifolin

The iron-catalyzed Kirmse reaction was used to generate neopentyl alpha-silyl thioethers that were elaborated to meroterpenes using two complementary routes: one route involved a sila-Pummerer rearrangement, and the other route involved a Peterson olefination. While severe eclipsing interactions undermined the efficiency of the stereospecific sila-Pummerer rearrangement, they made it possible to stereoselectively generate E olefins without isolation or separation of syn- and anti-beta-silyl alkoxides. Addition of a neopentyl alpha-silyl alkyllithium intermediate to an aryl aldehyde generated a mixture of syn- and anti-beta-silyl alkoxides. The syn-beta-silyl alkoxide eliminated stereospecifically at -78 degrees C to give an E olefin, whereas the anti-beta-silyl alkoxide was unreactive. The reaction mixture was then acidified and heated to induce stereospecific elimination of the anti isomer to give the same E olefin via a complementary cationic pathway. This route was used to complete the first synthesis of the meroterpene (+/-)-3-hydroxybakuchiol. In addition, we synthesized another meroterpene corresponding to the natural product corylifolin and offer evidence that the structure of corylifolin was misassigned.     

Crystal structures and thermal decomposition oftrans-Pd(Creat)2Cl2·2H2O andcis-Pt(Creat)2I2·3H2O

New complexes of the formulaetrans-Pd(Creat)₂Cl₂·2H₂O (I) andcis-Pt(Creat)₂I₂·3H₂O (II) have been prepared and their structures and stabilities studied by X-ray diffraction and thermal analysis. Both compounds have a squareplanar geometry, the two Cl atoms and N1 creatinine atoms are coordinated to Pd intrans configuration, while in compoundII the I atoms and N1 atoms are coordinated incis configuration. In spite of the earlier differences, the TG and DTA curves of the complexes show that their stability is very similar. Since an extended hydrogen bond system is present in the crystals, especially inII, the possible consequences in biological media are discussed briefly.

---

Kristallstrukturen und thermische Zersetzung vontrans-Pd(Creat)₂Cl₂·2H₂O undcis-Pt(Creat)₂I₂·3H₂O

Zusammenfassung Es wurden neue Komplexe der Formelntrans-Pd(Creat)₂Cl₂·2H₂O (I) undcis-Pt(Creat)₂I₂·3H₂O (II) hergestellt und ihre Strukturen und Stabilitäten mittels Röntgenstrukturanalyse bzw, thermischer Analyse untersucht. Beide Komplexe haben quadratisch-planare Struktur, die zwei Cl-Atome und die N1-Creatinin-Atome sind an Pd intrans-Konfiguration koordiniert, währenddessen in VerbindungII die I-Atome und die N1-Atome incis-Konfiguration zueinander stehen. Trotz früherer Differenzen zeigen die TG- und DTA-Kurven der Komplexe, daß ihre Stabilitäten sehr ähnlich sind. Da besonders inII ein ausgedehntes Wasserstoffbindungssystem vorhanden ist, werden auch mögliche Konsequenzen bezüglich biologischer Wirksamkeit kurz diskutiert.