Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Ester derivatives of α-hydroxymethylacrylates: Itaconate isomers giving high molecular weight polymers

New ester derivatives of ethyl α-hydroxymethylacrylate were synthesized using acid chlorides (traditional solution reactions), sodium salts of acids (with phase transfer catalysis), and trifluoroacetic anhydride (trifluoroacetate). The interfacial process gave high yields of clean products under very mild conditions. Derivatives obtained include the formate, acetate, hexanoate, stearate, benzoate, trifluoroacetate, and adamantanoate. Bulk polymerizations with 2,2′-azobis (isobutyronitrile) gave high molecular weight polymers with intrinsic viscosities of over 2 dL/g and molecular weights of several million [based on size-exclusion chromatography (SEC) comparison to polystyrene standards]. These high molecular weights were the result of autoacceleration in the bulk as shown by monitoring molecular weight with respect to conversion. Solution polymerization in benzene gave more typical polymer, e.g., the acetate derivative showed an SEC molecular weight of 52,000. Glass transition temperatures for the n-alkyl esters decreased from the formate (77°C) to the hexanoate (15°C); the stearate showed a side-chain melting point of 40°C but no T_g. Glass transitions were observed for the trifluoroacetate, benzoate, and adamantanoate polymers at 69, 130, and 214°C, respectively. Solution ¹³C-NMR showed evidence of tacticity information for the formate and acetate derivatives with appaent preference for syndiotactic polymer formation similar to that of methyl methacrylate. FTIR and solid-state ¹³C-NMR analysis gave spectra with functional group peaks and chemical shift values expected based on composition. The stearate monomer and polymer gave solid-state ¹³C chemical shifts of 34 and 33 ppm, respectively, for the central CH₂ units consistent with monoclinic and orthorhombic crystal packing. © 1994 John Wiley & Sons, Inc.     

The WCl6-e-Al-CH2Cl2 catalyzed polypentenamer formation via ring-opening metathesis polymerization (ROMP)

The synthesis of polypentenamer by an electrochemically generated metathesis polymerization catalyst from methylene chloride solution of WCl₆ was investigated. The active species formed by electroreduction of this salt under controlled potential of +900 mV at a platinum cathode with an aluminum anode were found to catalyze the ring-opening metathesis polymerization (ROMP) of cyclopentene, monocyclic olefin of relatively low strain, in high yield (89%) and at short period (32 min) under mild conditions. The effect of reaction parameters, e.g., olefin/catalyst ratio, reaction time, electrolysis time, catalyst aging, on the polymerization yield have been studied. The resulting polymer has been characterized by ¹H and ¹³C NMR, IR and gel permeation chromatography (GPC) techniques. Analysis of the polypentenamer microstructure by means of ¹³C NMR spectroscopy indicates that the polymer contains a mainly trans stereoconfiguration of the double bonds (σ_c = 0.31) and a slightly blocky distribution (r_tr_c > 1) of cis and trans double bond dyads (r_tr_c = 1.44). However, this electrochemical system is reluctant to facilitate the competing vinyl type addition polymerization reactions.     

Hydrogen bonding Part 20. Infrared study of the high temperature β-form of choline chloride

Infrared spectral studies of β-choline chloride at 95°C clearly demonstrate the presence of O---H … Cl hydrogen bonding. This observation contradicts an earlier conclusion, based on X-ray structural studies, that such hydrogen bonding could not occur in this high-temperature form of choline chloride. A moderate reinterpretation of the X-ray data may reconcile these contradictory conclusions. Unlike -choline chloride, β-choline chloride does not show C---H … Cl hydrogen bonding. It is possible that loss of C---H … Cl hydrogen bonding is a factor in the marked difference in radiation sensitivity of the - and β-forms.     

Molar conductance of aqueous solutions of sodium, potassium, and nickel trifluoromethanesulfonate at 25‡C

The electrical conductivities of aqueous solutions of NaCF₃SO₃, KCF₃SO₃, and Ni(CF₃SO₃)₂ have been measured at 25‡C in the concentration range 1 to 25X 10^-3 mol-dm^-3 The data approach the Onsager limiting law at low concentrations, leading to a limiting molar ion conductivity for the CF₃SO ₃ ⁻ ion of 44.5±0.2 S-cm²-mol^-1, based on standard values for the cations. Using a simple size parameter for unsymmetrical polyatomic ions, based on the ion geometry, it is shown that the well known empirical relation between the molar conductivities of symmetrical ions and their radii can be extended to include certain polyatomic anions including CF₃SO ₃ ⁻ . The results suggest that the CF₃SO ₃ ⁻ ion is either a weak structure breaker in aqueous solution or neutral in this respect.     

The first bis(orotato–N,O) complex: Synthesis,crystal structure,spectroscopic and thermal characterization of (chaH)2[Cu(HOr–N,O)2(cha)] · 2H2O (cha = cyclohexylamine and HOr = orotate(2−))

The novel bis(cyclohexylaminium) cyclohexylaminebis(orotate–N,O)cuprate(II) dihydrate, (C₆H₁₅N)₂[Cu(C₅H₂N₂O₄)₂(C₆H₁₄N)] · 2H₂O, has been prepared and characterized by elemental analysis, magnetic measurements, FT-IR and UV–Vis spectroscopy, thermal analysis and X-ray diffraction. The Cu(II) complex crystallizes in the monoclinic space group P2₁/c. The copper atom in the five-coordinated (chaH)₂[Cu(HOr–N,O)₂(cha)] · 2H₂O is chelated by a deprotonated pyrimidine nitrogen atom and carboxylate oxygen atom as a bis(bidentate) ligand and the cyclohexylamine ligand completes the square-pyramidal coordination. The thermal decomposition of the complex has been predicted by the help of thermal analysis (TG, DTG and DTA).     

A novel synthesis of 14-(hydroxymethylalkyl) derivatives of dibenzoxanthenes and 3,3-dimethyl-4-(2-hydroxy-1-naphthyl)benzo[f]chroman

Several reactions of 2-naphthol with 2-alkyl-2-hydroxymethylaldehydes have been investigated. Novel synthesis of 14-(hydroxymethyl)alkyldibenzo[a,j]xanthenes and 3,3-dimethyl-4-(2-hydroxy-1-naphthyl)benzo[f]chroman has been realized.     

Reactivity of 4-Hydroxy-2-pyrones in the Diels-Alder Reactions

Biphenylcarboxylic acid derivatives, and some tetracyclic bridge cycloadducts have been prepared by Diels-Alder reactions of acetylenic and olefinic dienophiles with 4-hydrpxy-6-phenyl-2H-pyran-2-one and its methyl ether derivative.     

Synthesis and evaluations of bisphosphonate‐containing monomers for dental materials

Two new bismethacrylamide ( 1 , 2 ) and two new methacrylamide ( 3 , 4 ) dental monomers were synthesized. In each group, one monomer contains a bisphosphonate group, the other a bisphosphonic acid group. Monomer 1 and 3 were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride and methacryloyl chloride with tetraethyl aminomethyl‐bis(phosphonate) and converted to the bisphosphonic acid monomers 2 and 4 by hydrolysis with trimethylsilyl bromide. Monomer 1 (m.p.: 71–72 °C), monomer 3 ( 33–34 °C), and monomer 4 (no m.p.) were obtained as white solids and monomer 2 a viscous liquid, soluble in water. Homopolymerization of 1 gave crosslinked polymers, indicating its low cyclization tendency. The photopolymerization studies indicated that its copolymerizability with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane and 2‐hydroxyethyl methacrylate (HEMA) without changing their rates and conversions significantly means that it could be used as a biocompatible crosslinker. Although monomer 2 showed low polymerizability, because of its good performance in terms of solubility, hydrolytic stability, hydroxyapatite interaction, acidity, and copolymerizability with HEMA, it shows potential to be used in self‐etching dental adhesives. The thermal polymerization of 3 resulted in soluble polymers and evaluation of monomer 4 in terms of solubility, acidity, and copolymerizability with HEMA indicated its potential as an adhesive monomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Zwitterionic amino acids as precursors for nonmetal cation pentaborate salts

Nonmetal cation (NMC) pentaborate structures were synthesized using the amino acid molecules as cations precursors. Chemical composition analysis, infrared spectroscopy, mass analysis, boron nuclear magnetic resonance, and thermal gravimetric analysis (TGA/DTA) methods were used for structural characterization. The hydrogen storage efficiency of molecules was also determined experimentally. The recorded infrared spectra support the structural similarities of the molecules. Stretchings of pentaborate rings and characteristic peaks of amino acids were detected in infrared spectra. When the thermal analysis curves were recorded, it was found that the structures showed similar decomposition steps. Due to the result of thermal decay, glassy boron oxide (B₂O₃) formation was observed as the final decomposition products of all molecules. Peaks associated with boric acid, triborate, and pentaborate were observed in the ¹¹B spectra of these salts. Powder X-ray diffraction spectroscopy supports the presence of BO₃ and BO₄⁻ groups regarding the presence of pentaborate rings. It also indicates the high crystallinity of the structures. The molecular cavities detected by brunauer–emmett–teller analysis were found to be 3.586, 1.922, 1.673, and 1.923 g/cm³. Low-molecular cavities can be attributed to the high hydrogen-bonding capacity of the structures. The hydrogen capture efficiency of the pentaborate salts was found to be in the range of 0.039-0.