Millimeter and submillimeter wave spectroscopic investigations into the rotation-tunneling spectrum of gGg ethylene glycol, HOCH2CH2OH

The rotation-tunneling spectrum of the second most stable gGg^′ conformer of ethylene glycol (1,2-ethanediol) in its ground vibrational state has been studied in selected regions between 77 and 579 GHz. Compared to the study of the more stable aGg^′ conformer, a much larger frequency range was studied, resulting in a much extended frequency list covering similar quantum numbers, J?55 and K_a?19. While the input data were reproduced within experimental uncertainties up to moderately high values of J and K_a larger residuals remain at higher quantum numbers. The severe mixing of the states caused by the Coriolis interaction between the two tunneling substates is suggested to provide a considerable part of the explanation. In addition, a Coriolis interaction of the gGg^′ ground vibrational state with an excited state of the aGg^′ conformer may also contribute. Relative intensities of closely spaced lines have been investigated to determine the signs of the Coriolis constants between the two tunneling substates relative to the dipole moment components and to estimate the magnitudes of the dipole moment components and the energy difference between the gGg^′ and the aGg^′ conformers. Results of ab initio calculations on the total dipole moment and the vibrational spectrum were needed for these estimates. The current analysis is limited to transitions with quantum numbers J?40 and K_a?6 plus those having J?22 and K_a?17 which could be reproduced within experimental uncertainties. The results are aimed at aiding radioastronomers to search for gGg^′ ethylene glycol in comets and in interstellar space.     

Molecular structure of gaseous vanadyl(V) fluoride as studied by electron diffraction,and its modified valence force field

The molecular structure of gaseous OVF₃ has been determined by electron diffraction to be: r_g(V-O) = 1.570(5) Å, r_g(V-F) = 1.729(2) Å and ∠_α(OVF) = 107.5(4)°. A modified force field has been fitted to results from spectroscopic as well as diffractional studies. A similar attempt to determine the force field for OVCl₃ was not as successful as for OVF₃, probably because the Coriolis constants are less accurately determined for that molecule.     

A resonance Raman,surface-enhanced resonance Raman,IR, and ab initio vibrational spectroscopic study of nickel(II) tetraazaannulene complexes

The IR and resonance Raman spectra of the nickel(II) complexes of dibenzo[b,i][1,4,8,11]tetraaza[14]annulene (TAA) and 5,7,12,14-tetramethyldibenzo[b,i][1,4,8,11]tetraaza[14]annulene (TMTAA) have been measured and compared with ab initio calculations of the vibrational wavenumbers at the B3-LYP level using the LanL2DZ basis set. An excellent fit is found between the experimental and calculated data, enabling precise vibrational assignments to be made. Surface-enhanced resonance Raman spectra were obtained following adsorption on Ag electrodes, with potentials in the range -0.1 to -1.1 V vs Ag/AgCl. There is evidence for contributions from both the electromagnetic and charge transfer (CT) surface enhancement mechanisms. The data indicate that variations in band intensities with electrode potential can be interpreted in terms of the CT mechanism.     

Chemical interactions in the surface-enhanced resonance Raman scattering of ruthenium polypyridyl complexes

Surface-enhanced resonance Raman scattering (SERRS) from the alpha-diimine complexes [Ru(bpm)(3)](2+) and [Ru(bpz)(3)](2+) is reported for the first time at a roughened silver electrode. In both cases, a possible adsorbate orientation has been proposed involving binding through nitrogen lone pair electrons to the silver surface, based on changes in band positions upon adsorption. The SERRS spectra of [Ru(bpm)(3)](2+) were found to change slightly with a change in applied potential. The relative intensity of the nu(C6C6') band was found to be dependent on both excitation wavelength and applied potential. This was ascribed to an active charge transfer (CT) mechanism operating synergistically with the electromagnetic mechanism. No such CT activity was observed in [Ru(bpz)(3)](2+). It is tentatively suggested that this behavior may arise from the different modes of adsorption of the two complexes.     

Micro- and nano-mechanical characterization of polyamide 11 and its composites containing cellulose nanofibers

Nanocomposites from polyamide 11 and dried cellulose nanofibers (CNs), 16–30 nm in thickness and 50–400 nm in length, were prepared via direct melt mixing and their micro- and nano-mechanical properties were studied. (PF) QNM (Quantitative Nanomechanical Mapping) method was used to map nanomechanical properties at the surface of polyamide 11 and nanocomposites. This new AFM method emphasized both the increased modulus in nanocomposites as compared to the matrix and the microstructure on different levels in polyamide 11 and its nanocomposites. PF QNM showed that their crystalline structure consists of bundles of lamellar stacks, 200–350 nm in width and 20–40 nm wide lamellar stacks. Moreover, PF QNM study emphasized higher structural order in nanocomposites with 3 and 5 wt.% CNs and lower in the nanocomposite with 8 wt.% CNs as compared to the reference. These observations were verified and are consistent with both crystallinity values determined by DSC and micro-mechanical test results. The oriented bundles of lamellar stacks, observed by PF QNM, could be considered as the main blocks determining high mechanical properties for the studied nanomaterials.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.     

“Surface water” and “strong-bonded water” in cyclodextrins: a Karl Fischer titration approach

Cyclodextrins are some of the most used carriers for bioactive compounds (as host–guest complex) and many factors influence the association–dissociation of this complex, some of them being related to hydrophobicity. In the solid state, cyclodextrins contain two types of water molecules: “surface” water molecules (especially close to the crystal surface) and “strong-bonded” water molecules (especially from the cyclodextrin cavity), but the classification is hard to do, and the concentration of these water molecules are relatively difficult to estimate by simple methods. In the present study we used the volumetric Karl Fischer titration to estimate these types of water molecules in cyclodextrins by means of the rate of water reaction (related to diffusion from cyclodextrin crystals). “Surface” water molecules are titrated with rates between 1.8–2.8 mM/s for α-cyclodextrin, while for β-cyclodextrin these rates are little bit higher (2.9–3.4 mM/s). The rates corresponding to “strong-bonded” water molecules are approximately tens fold lower (0.05–0.3 mM/s for α-cyclodextrin and 0.15–0.33 mM/s for β-cyclodextrin). The approximate ratio between “surface” and “strong-bonded” water molecules could also be estimated by this simple and rapid method.     

Polyol-modified layered double hydroxides with attenuated basicity for a truly reversible capture of CO2

Dendrimers bearing hydroxyl groups supported by layered double hydroxides (CO₃–LDH) with Mg/Al ratio ranging from 1:1 to 5:1 showed improved properties for the reversible capture of carbon dioxide (CO₂). The adsorption capacity of the starting LDH was due to the intrinsic base-like behavior, and was found to depend on the Mg/Al ratio. When contacted with polyol dendrimers in aqueous media, no intercalation took place. This was explained in terms of low exfoliation grade of LDH and hydrophobic character of the dendrimer molecules. The latter rather adsorb on the external surface of the LDH stacks for low dendrimer loadings, or aggregate into organic clusters for higher contents. Analyses through thermal programmed desorption of CO₂ revealed that dendrimer incorporation advantageously attenuates the basicity strength of the starting LDH support, by lowering the desorption temperature. The OH groups of the organic moiety were found to display an amphoteric character, and act as the main adsorption sites. The weak interactions with CO₂ facilitate easier release of the major part of adsorbed CO₂ at temperature not exceeding 80–100 °C. On polyol organo-LDHs, the reversible CO₂ retention was discussed herein in terms of acid–base interactions. This concept allows envisaging the capture of diverse pollutants and other greenhouse gases by modifying the chemical groups on the dendritic moiety.