Pre—Separation Axioms in Fuzzifying Topology

1　 IntroductionYing[5,6 ] introduced and elementally developed so called fuzzifying topology with the semanticmethod of continuous valued L ogic.Shen[7] introduced and studied T0 -,T1-,T2 (Hausdorff) -,T3(regularity) -,T4 (normality) -separation axioms in fuzzifying topology.In [3 ]the concepts of thefamily of fuzzifying pre-open sets,fuzzifying pre-neighbourhood structure of a point and fuzzifyingpre-closure are introduced and studied.It is worth to mention that pre-separation axioms are …     

Optical absorption of tetraphenylporphyrin thin films in UV-vis-NIR region

The optical absorption of thermally evaporated tetraphenylporphyrin (TPP) in the UV-vis-NIR region have been studied. The absorption spectra recorded in the UV-vis region for the as deposited and annealed films showed different absorption bands, namely the Soret(B) at region 360-490nm, Q-band region consist of four bands in the region 500-720nm and two other bands labeled N and M in UV region. The Soret band always shows its characteristic effect splitting in all the TPP thin films and the effect of annealing on the intensities of these components have been observed. The spectra of the infrared absorption allow characterization of vibrational modes for the powder, as deposited and annealed thin films. Some of the optical absorption parameters, namely molar extinction coefficient, varepsilon, half band width, Deltalambda, electronic dipole strength, q(2) and oscillator strength, f, of the principle optical transitions have also been evaluated.     

Base induced cyclization of some quinolines. Formation of fused nitrogen heterocyclic ring system

Condensation of 3,5-dinitro-4-chloro-6-methoxy-2-methylquinoline (1) with benzylamine, ethanolamine and/or thioglycolic acid afforded the quinoline derivatives4 a-c. Cyclization of4 a and4 b with alkali and condensation of1 with glycine in sodium carbonate solution furnish 2H-imidazo[4,5-c]quinoline derivatives5 a-c, respectively. Treatment of5 b with benzaldehyde in presence of zinc chloride gave the styryl derivative6. 1 reacted with sodium azide to give the azido derivative4 d, which upon treatment with phenylhydrazine or sodium borohydride yielded the 4-amino derivative4 3. Moreover,1 was treated with phenylhydrazine to give4 f, which cyclized in 10% sodium hydroxide solution to the corresponding v-triazolo[4,5-c]quinoline 3-oxide derivative7. When however4 f was treated with dilute hydrochloric acid, the corresponding phenylpyrazolo[3,4,5-de]quinoline derivative8 was obtained.

---

Baseninduzierte Cyclisierung einiger Chinoline. Darstellung höherer Stickstoff-Heterocyclen

Zusammenfassung Kondensation von 3,5-Dinitro-4-chlor-6-methoxy-2-methylchinolin (1) mit Benzylamin, Ethanolamin und/oder Thioglycolsäure ergab die Chinolinderivate4 a-c. Cyclisierung von4 a und4 b mit Alkali und Kondensation von1 mit Glycin in Natriumcarbonatlösung lieferte 2H-imidazo[4,5-c]chinolin-Derivate5 a-c. Behandlung von5 b mit Benzaldehyd in Gegenwart von Zinkchlorid ergab das Styrylderivat6. 1 wurde mit Natriumazid zum Azidoderivat4 d umgesetzt, das mit Phenylhydrazin oder Natriumborhydrid zum 4-Aminoderivat4 e weiterreagierte.1 ergab mit Phenylhydrazin4 f, das in 10% NaOH-Lösung zum entsprechenden Triazolo[4,5-c]chinolin-Derivat7 cyclisierte. Aus4 f wurde mit verdünnter Salzsäure das Phenylpyrazolo[3,4,5-de]chinolin8 erhalten.

     

Photoelectrochemical behavior of coupled SnO2|CdSe nanocrystalline semiconductor films

A photoelectrochemical cell with a coupled SnO₂|CdSe nanocrystalline semiconductor electrode has been prepared by sequential deposition of SnO₂ and CdSe films onto an optically transparent electrode (OTE), and its photoelectrochemical behavior has been studied. The results show that the coupling of CdSe with SnO₂ leads to an improvement in the performance of OTE|SnO₂|CdSe over OTE|CdSe cells in terms of increased incident photon-to-current conversion efficiency, increased stability and smaller reversal of current. The favorable positioning of the energy bands of SnO₂ and CdSe is responsible for the above observations. Various photoelectrochemical parameters of the OTE|SnO₂|CdSe cell obtained for an incident light power of 0.31 mW cm⁻² at 470nm, are as follows: I_sc ≈ 25–30 μA cm⁻², V_oc ≈ 0.5–0.6 V, ƒƒ = 0.47 and a power conversion efficiency of about 2.25%.     

Reactivity of 4-bromomethylquinoline derivatives towards glycine and thioglycolic acid. A new ring system

Condensation of 4-bromomethylquinoline derivatives1 a-1 c with glycine and thioglycolic acid gave the corresponding quinolylmethylglycine and quinolylmethylthioacetic acid derivatives2 a-2 c and2 d-2 f, respectively. Cyclization of2 a-2 f was affected either by polyphosphoric acid or concentrated sulphuric acid to give3 a-3 f. Chlorination of2 a-2 f and3 a-3 f were also accomplished.

---

Die Reaktivität von 4-Brommethylchinolin-Derivaten gegenüber Glycin und Thioglycolsäure. Ein neues Ringsystem

Zusammenfassung Die Reaktion von 4-Brommethylchinolin-Derivaten1 a-c mit Glycin und Thioglycolsäure gab die entsprechenden Kondensationsprodukte2 a-c und2d-f.2 a-f konnten mit Polyphosphorsäure bzw. mit konzentrierter Schwefelsäure zu Benzo[c]-2,6-naphthyridinen3 a-f zyklisiert werden.2 a-f und3 a-f waren einer Chlorierung (POCl₃) zugängig.

     

Bounded starlike functions of complex order

LetF(b, M) (b ≠ 0 complex,M>1/2) denote the class of functionsf(z) =z + Σ _n=2 ^∞ a _n z ⁿ analytic in U={z:|z|<1} which satisfy for fixedM, f(z)/z ≠ 0 inU and \(\left| {\frac{{b - 1 + \left[ {zf'{{\left( z \right)} \mathord{\left/ {\vphantom {{\left( z \right)} {f\left( z \right)}}} \right. \kern-0em} {f\left( z \right)}}} \right]}}{b} - M} \right|< M, z \in U\) . In this note we obtain various representations for functions inF(b, M). We maximize |a₃=μa ₂ ² | over the classF(b, M). Also sharp coefficient bounds are established for functions inF(b, M). We also obtain the sharp radius of starlikeness of the classF(b, M).     

Electrical Conductance of Fast Extrusion Furnace Carbon Black-Loaded Styrene-Butadiene Rubber during Swelling in Kerosene

The effect of swelling in kerosene on the electrical conductance of 60, 80, and 100 part per hundred parts of rubber by weight of Fast Extrusion Furnace (FEF) carbon black-loaded styrene-butadiene rubber (SBR, 1502) was studied. It was found that there is a characteristic time of swelling after which a sudden decrease in conductivity appears. An ideal and simple model is suggested to calculate the carbon-carbon interspacing distance, D, in the carbon/rubber matrix. The dependence of D on the swelling time is also discussed.     

Synthesis and Characterization of Two New Compounds: N(C2H4NH3)3(H2TO4)(HTO4)·2H2O (T = P,As)

The synthesis and structures of two new compounds with the general formula N(C₂H₄NH₃)₃(H₂TO₄)(HTO₄)·2H₂O (T = P, As) are reported. They crystallize with triclinic unit cells and are isotropic. We determined the structure of phosphate salt. The following unit cell parameters were found: a = 9.886(4), b = 9.308(2), c = 10.140(3) Å, α = 109.38(2), β = 108.83(3), γ = 74.40(3)°, V = 819.2(5) ų, and ρ_cal. = 1.537 g · cm^?3. The crystal structure was solved with a final R = 0.042 for 3748 with I > 3σ I). The space group is P-1 and Z = 2. The atomic arrangement can be described as a three-dimensional network of hydrogen bonds made up from H_nPO₄ ^3?n (n = 1, 2) anions and H ₂ O molecules between which are trapped the tris(2-ammoniumethyl)amine cations. Solid-state ¹³C and ³¹P MAS-NMR spectroscopies are in agreement with X-ray structure. Ab initio calculations allow the attribution of the phosphorus signals to the independent crystallographic sites.     

First Synthesis of Thienopyrazole Thioglycosides

Reported is the first method to prepare a new class of thienopyrazole thioglycosides via a one‐pot reaction of the sodium thienopyrazolthiolate salts with 2,3,4,6‐tetra‐O‐acetyl‐α‐D‐gluco‐and galactopyranosyl bromides. The sodium thienopyrazolthiolate salts are prepared using pyrazoldithioic acids and their corresponding mono ‐ and dithiolate salts.     

Assessment of Lewis-Acidic Surface Sites Using Tetrahydrofuran as a Suitable and Smart Probe Molecule

Measuring the Lewis-acidic surface sites in catalysis is problematic when the material‘s surface area is very low (S_BET ≤1 m² ⋅ g⁻¹). For the first time, a quantitative assessment of total acidic surface sites of very small surface area catalysts (MoO₃ as pure and mixed with 5–30 % CdO (wt/wt), as well as CdO for comparison) was performed using a smart new probe molecule, tetrahydrofuran (THF). The results were nearly identical compared to using another commonly used probe molecule, pyridine. This audition is based on the limited values of the surface area of these samples that likely require a relatively moderate basic molecule as THF with pK_b=16.08, rather than strong basic molecules such as NH₃ (pK_b=4.75) or pyridine (pK_b=8.77). We propose mechanisms for the interaction of vapour phase molecules of THF with the Lewis-cationic Mo and Cd atoms of these catalysts. Besides, dehydration of isopropyl alcohol was used as a probe reaction to investigate the catalytic activity of these catalysts to further support our findings in the case of THF in a temperature range of 175–300 °C. A good agreement between the obtained data of sample MoO₃-10 % CdO, which is characterised by the highest surface area value, the population of Lewis-acidic sites and % selectivity of propylene at all the applied reaction temperatures was found.