Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

The hydration of sodium dehydrocholate micelles

The hydration of micellised sodium dehydrocholate molecules was determined by viscosity measurements. It was found that there are 39 water molecules for each micellised surfactant molecule. About ten water molecules may be attributed to the hydration of the sodium carboxylate group. By assignation of two water molecules to each of the three carbonyl groups, the total hydration of a micellised sodium dehydrocholate molecule was estimated as about 16 water molecules. The remaining 23 water molecules per micellised sodium dehydrocholate molecule may be attributed to water trapped in the structure of micelles.     

The aggregation of sodium dehydrocholate in water

 We used a battery of different methods to study the association in aqueous sodium dehydrocholate (NaDHC) solutions. This salt associates by a stepwise mechanism. Below (9.6 ± 4.2) × 10⁻⁴ mol dm⁻³ there is a molecular solution with some strongly insoluble dehydrocholic acid produced by hydrolysis. Between (9.6 ± 4.2) × 10⁻⁴ and (5.2 ± 2.2) × 10⁻³ mol dm⁻³, an aggregate similar to acid soap (NaDHC.HDHC) appears and its amount and the aggregate's size increase with concentration. At =(2.20 ± 0.85) × 10⁻² mol dm⁻³ the aggregates formed have properties usually associated with true micelles, such as solubilisation of water-insoluble dyes. These aggregates increase in size with concentration and change their shape at 8 × 10⁻² mol dm⁻³, giving nonsymmetrical aggregates. The changes in the solution physicochemical properties at these concentrations may be misinterpreted and this explains the different values of the critical micelle concentration reported in the literature for substances with similar structure, such as bile salts. Received: 14 May 2001 Accepted: 10 August 2001     

Aggregation effects on evaporation and the air/water interface of dodecyltrimethylammonium hydroxide solutions

 The system dodecyltrimethylammonium hydroxide (DTAOH)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. Results confirmed earlier conclusions about a stepwise aggregation mechanism in DTAOH solutions. The aggregation process started at a total concentration C _T=(2.51±0.10)×10^-4 mol dm^-3) which probably corresponds to the formation of dimers. At C _T= (1.300±0.041)×10^-3 mol dm^-3 there was a change in the surface and evaporation behavior, corresponding to the formation of small, fully ionized aggregates which grew with increasing concentration. At C _T= (1.108±0.010)×10^-2 mol dm^-3 the formation of true micelles with hydroxide counterions in the Stern layer did not change significantly the evaporation and adsorption behavior. This means that between this concentration and C _T=(3.02±0.28)× M28.8n10^-2 mol dm^-3, the changes in structure were gradual. At the latter concentration there was a sudden change in the monolayer state at the air/water interface, with a strong surfactant desorption, and a major change in evaporation behavior. The changes are compatible with the formation of few, large aggregates reducing the total concentration of kinetically independent solute units, which in turn increased the activity of the solvent. This phenomenon is in agreement with literature information. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by colligative effects. The reduction of the effective area available for evaporation had only a slight effect in water evaporation. Received: 9 January 1997 Accepted: 19 October 1997     

Structural and spectroscopic properties of N-benzenesulphonylglycine complexes with copper (II)

In this paper are reported structural and spectroscopic properties of (N-benzenesulphonylglycinato) triaquacopper (II) (complex I) and dipotassium bis (N-benzenesulphonylglycinato) cuprate (II) (complex II). The crystals of (I) are monoclinic, space groupP2₁/c,Z=4, with=12.736(4),b=10.292(3),c=10.402(3) Å,=109.41(2)° while those of complex (II) are orthorhombic, space groupPbca, witha=23.333(8),b=10.508(4),c=16.989(5) Å. In both complexes the aminoacid molecules act as bidentatevia carboxylic oxygen and the amide nitrogen atom; in (I) three water molecules complete the coordination to tetragonal pyramidal, while in (II) coordination is square planar, tetrahedrally distorted involving two ligand molecules. The structure (I) was refined to a finalR index of 0.0596 and (II) toR=0.0466.     

Isopropenyl acetate: A cheap and general acylating agent of alcohols under metal-free conditions

Functionalized primary, secondary and tertiary alcohols are efficiently acetylated by isopropenyl acetate and catalytic p-TsOH.     

Development of fibre-metal laminates for improved impact performance

An analytical and experimental investigation into the low-velocity behaviour of GLARE Fibre-Metal Laminates (FMLs) has been performed. A quasi-static approach was developed to estimate the perforation energy absorbed between the constituents of GLARE. The analysis considered contact area increase during perforation and strain rate effect on material properties. Particular attention was paid to the effect of ply-angle orientation and aluminium position. Predicted maximum impact force, maximum displacement, and perforation energy related to impact velocity were within 10% of test results. Stacking composite plies oriented along the diagonal of the plate with more than 2 aluminium layers leads to a more impact resistant FML. The generic nature of the developed methodology can support the optimization of high-performance FML concepts.     

Recent advances in propylene polymerization with MgCl2 supported catalysts

The role of Lewis bases in MgCl₂ supported catalysts for olefin polymerization is a subject of continuous interest and discussion in order to obtain more and more active and stereospecific catalysts and to explain their stereoregulating mechanism. Through molecular calculation and conformational analysis it was possible to identify chelating diethers that have the correct oxygen-oxygen distance necessary to tightly coordinate with the Mg ions of the support, even in the presence of other strong Lewis acids, and unable to give secondary reactions with TiCl₄, AlR₃, Ti-C and Ti-H bonds. The use of these donors has allowed the synthesis of catalytic systems that are both highly active and stereospecific even in the absence of external donors. Kinetic data of propylene polymerization with these catalyst systems are reported. The importance of the distance between the donor atoms in bifunctional Lewis bases has been proved also in the case of new classes of internal donors. Molecular modelling studies have enabled us to formulate models of active sites, located on some corners of MgCl₂ crystallites, whose chirality is induced by the presence of a donor molecule in their environment. These models could explain, at least in part, the exceptional increase of isotactic polymer productivity observed for stereospecific catalyst systems, containing only the internal donor, with respect to catalysts lacking the Lewis base and could account for the influence of the donor on the molecular properties of the obtained polymers.     

A chitosan-templated monolithic siliceous mesoporous-macroporous material

 We synthesised a porous siliceous material via hydrothermal hydrolysis of sodium silicate, using chitosan as a template. As far as we know, this is the first synthesis of siliceous porous material using chitosan as a template in a hydrothermal way. A fibrous material was obtained, whose macroscopic fibres were formed by a spongelike siliceous network with pores having a radius of 0.57 μm. The siliceous walls of the pores were, in turn, of the form of a microporous–mesoporous material; the pore radius distribution was polymodal with maxima at 0.84, 1.0, 1.2 and 1.5 nm and a broad band between 3 and 10 nm. This structure may be due to the aggregation of the hydrated chitosan helices in bundles of parallel fibres with different size and the gelation of the system. The aggregation process might be induced by the addition of silicate. Received: 12 January 2000/Accepted: 7 March 2000