Influence of copper solute on the creep rate sensitivities of aluminium

The presence of copper atoms as continuous networks at the grain boundaries of an aluminium-copper alloy has been considered not preventing the moving of dislocations during creep (or at least partially). The dislocations can bs absorbed by these boundaries and penetrate through them. That leads to changés of shape and structure of grains and also to the sliding of grains against each other. This was deduced from the accelerating increase in the sensitivity of the steady state creep rate to the applied stress of an aluminium 2·8 wt% copper alloy examined at wide range of temperatures (50–350 °C) and applied stresses (7–170 MPa). This rapid increase in the sensitivity parameter of the steady state creep rate occurs in Al-Cu alloys at quite higher ranges of applied stresses and may be attributed mainly to the contribution of the grain boundary movements to the creep strain.     

Biomagnetic measurements utilising a superparamagnetic marker: a feasibility study

Summary A preliminary study is here reported on a new potential marker for biomagnetic measurements. The marker consists of superparamagnetic polymer microspheres which were detected in the presence of external steady magnetic fields by means of an r.f.-SQUID magnetometer. The particles were prepared in samples differing in the concentration value and immersed in a homogeneous magnetic field of variable intensity. A simple model was taken into account for the distribution of the microspheres in the samples, so that the theoretical values were compared to the marker field values measured by the biomagnetic sensor. The overall sensitivity of the experimental apparatus and the minimum concentration value of the marker were then estimated.     

Effect of support on the synergy in HDS of thiophene and HDN of pyridine over Mo sulfide catalysts promoted by Rh

The effect of support (SiO₂-Al₂O₃, Al₂O₃,MgO) of the Rh-Mo(S) sulfide catalysts on the synergy in hydrodesulfurization (HDS) of thiophene and hydrodenitrogenation (HDN) of pyridine was studied. The synergy in HDS was between 7–10 regardless of the kind of support used. The synergy in HDN varied from none over the MgO supported sample to about 3 over SiO₂-Al₂O₃ supported catalyst, in accord with the positive effect of increasing support acidities. This revised version was published online in June 2006 with corrections to the Cover Date.     

Thermal properties of some complexes of quinolinic acid with divalent metal ions

Studies of the complexes of pyridinecarboxylic acids with divalent metal ions as a function of the position of the carboxyl groups were extended. The thermal properties of the complexes of quinoline acid (pyridine-2,3-dicarboxylic acid) with several divalent metal ions were determined by thermogravimetry (TG) and differential thermal analysis (DTA). A correlation between these compounds and others obtained by reaction between the studied metal ions with similar acids (lutidinic acid (pyridine-2,4-dicarboxylic acid) and isocinchomeronic acid (pyridine-2,5-di-carboxylic acid) is discussed in terms of the position of the carboxyl group far from the aza group. The thermal stability of the metal complexes is in the order Mn(II) > Fe(II) > Zn(II) ? Co(II) > Ni(II) > Cu(II).     

Enantioseparations of polyhalogenated 4,4’-bipyridines on polysaccharide-based chiral stationary phases and molecular dynamics simulations of selector–selectand interactions

2’-(4-Pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3’,5,5’-tetrachloro-2-iodo-4,4’-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2’-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2’-(4-pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van ’t Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.     

Hydration Behaviour of Mixtures of Cement and Fly Ash with High Sulphate and Chloride Content

DTA/TG thermoanalytical investigations and X-ray diffractometry were carried out which demonstrate the effect of MSW fly ash on the hydration reactions of pozzolanic cement. The MSW fly ash has high content of calcium sulphate, alkali chlorides and heavy metals. During the first curing period the calcium aluminate reacts with the sulphate to form ettringite. In that period also the presence of syngenite is noted in the pastes. With the growth of the fly ash content of the mixture there is a lengthening of the period in which the hydration reactions of the calcium silicates are inhibited. Subsequently with the progress of hydration in the pastes the CSH phase develops and the formation of calcium chloroaluminate phase is observed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spectral and thermal studies of copper(II) complexes of 3- and 4-pyridinealdoxime

Copper(II) complexes of 3- and 4-pyridinealdoxime have been prepared and analyzed by spectroscopic (ir and diffuse reflectance) and thermoanalytical (TG, DTG and DTA) techniques. For both these systems, only species with metal: organic ligand: chloride ratio of 122 were found, and the organic ligand appears as a neutral molecule. The spectral data suggest a polymeric structure where the copper(II) ions are in a distorted octahedral environment.The thermal decompositions occur through the reduction of copper(II) to copper(I) and the conversion of the residual organic ligand into acid amide, as found for dihydrogenbis(pyridine-2-aldoxime) copper(II) chloride, but the initial decomposition temperatures are slightly increased, giving rise to the thermal stability sequence:

---

Zusammenfassung Kupfer(II)-Komplexe von 3- und 4-Pyridinaldoxim wurden hergestellt und spektroskopisch (IR und diffuse Reflexion) sowie thermoanalytisch (TG, DTG und DTA) analysiert. Für beide Systeme wurden nur Species mit einem Metall:Ligand:Chlorid-Verhältnis von 122 gefunden. Der organische Ligand liegt als neutrales Molekül vor. Die Spektren deuten auf eine polymère Struktur hin, in der die Kupfer(II)-Ionen in einer verzerrten oktaedrischen Koordination vorliegen. Die thermischen Zersetzungen verlaufen über die Reduktion von Cu(II) zu Cu(I) und die Umwandlung des verbleibenden organischen Liganden in Säureamid, wie für Dihydrogen-bis(pyridin-2-aldoxim)-kupfer(II)-chlorid gefunden wurde, aber die Temperaturen des Beginns der Zersetzung und damit die thermische Stabilität steigen in der Reihenfolge [Cu(Py₄-CHNOH)₂Cl₂][Cu(Py₃-CHNOH)₂Cl₂]>[Cu(Py₂-CHNOH)₂]Cl₂ etwas an.

---

(, ) ( ) 3- 4- . 122, . , . -( -2-)- . , , , : Cu(4-Py-CHNOH)₂Cl₂Cu(3-Py-CHNOH)₂Cl₂>Cu(2-Py-CHNOH)₂Cl₂.