Aberrations theory of a time dependent magnetic field lens

We analyze new forms of aberrations affecting a time dependent magnetic field lens recently proposed. The lens consist of an axially symmetric ellipsoidal solenoid producing a spatially uniform but time pulsating homogeneous field. The dynamics of electrons emitted by some object and injected into this coil shows that this system is capable of focusing a parallel beam or produce images free of geometrical aberrations. The cardinal elements of this lens change periodically in positions and therefore to obtain a stationary image it is necessary to employ a chopped electron beam. Two forms of aberrations originate from the finite duration of the electron pulse and the energy dispersion of the incoming beam (chromatic aberration). Their image degradation effects are quite similar and result from recording different axially displaced images at some fixed stationary plane. We show how, by adjusting the parameters characterizing the magnetic pulse and introducing small apertures that increase the depth of focus, their effects can be reduced or in some cases eliminated. Other forms of instrumental aberrations characteristic of this time dependent magnetic field lens are briefly discussed.     

Evidences of phase separation in moisture‐cured poly(urethane urea)s by means of temperature modulated differential scanning calorimetry

The degree of phase separation in several moisture‐cured poly(urethane urea)s (PUUs) was studied by FTIR spectroscopy, wide angle X‐ray diffraction (WAXD), and temperature‐modulated differential scanning calorimetry (TMDSC). This latter technique was shown to be particularly useful in analysing the degree of phase separation in PUU polymers. Both phase mixing and phase segregation coexisted in the PUUs and the degree of phase separation increased as the urea hard segment (HS) content in the PUU increased. The maximum solubility of urea HSs into the polyol soft segments (SSs) was achieved for 50 wt % urea HS content in diol‐based PUUs, whereas for triol‐based PUUs the highest solubility between HS and SS was reached for lower urea HS amount. Finally, the higher the urea HS content the higher the extent of phase separation in the PUU. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3034–3045, 2007     

Optical properties of in situ doped and undoped titania nanocatalysts and doped titania sol-gel nanofilms

In this paper we present spectroscopic properties of doped and undoped titanium dioxide (TiO₂) as nanofilms prepared by the sol-gel process with rhodamine 6G doping and studied by photoacoustic absorption, excitation and emission spectroscopy. The absorption spectra of TiO₂ thin films doped with rhodamine 6G at very low concentration during their preparation show two absorption bands, one at 2.3 eV attributed to molecular dimmer formation, which is responsible for the fluorescence quenching of the sample and the other at 3.0 eV attributed to TiO₂ absorption, which subsequently yields a strong emission band at 600 nm. The electronic band structure and optical properties of the rutile phase of TiO₂ are calculated employing a fully relativistic, full-potential, linearized, augmented plane-wave (FPLAPW) method within the local density approximation (LDA). Comparison of this calculation with experimental data for TiO₂ films prepared for undoped sol-gels and by sputtering is performed.     

Left, right, and inner socles of associative systems

We investigate the basic properties of the different socles that can be considered in not necessarily semiprime associative systems. Among other things, we show that the socle defined as the sum of minimal (or minimal and trivial) inner ideals is always an ideal. When trivial inner ideals are included, this inner socle contains the socles defined in terms of minimal left or right ideals. This revised version was published online in June 2006 with corrections to the Cover Date.     

SrZrO3-based proton conducting materials with La additions

The behaviour of La-containing strontium zirconate based ceramics is revised. La additions contribute to improve the sinterability of these materials, but transport properties are also affected. Sr_1−xLa_xZrO_3+δ show some unusual changes in transport properties when samples are exposed to H₂-containing atmospheres and then reoxidized. Nevertheless, the transport properties of (Sr,La)(Zr,Y)O_3−δ, are still mainly dependent on Y additions, at least for cases when the fraction of Y exceeds the fraction of La. In addition, lanthanum causes significant changes in lattice parameters. A combination of conductivity measurements in different atmospheres, ion blocking experiments, and emf measurements has been used to demonstrate that electron hole conductivity increases with temperature, and the protonic contribution drops. The transport properties at temperatures lower than about 800 °C might be affected by structural changes. Paper presented at the 2nd Euroconference on Solid State Ionics, Funchal, Madeira, Portugal, Sept. 10–16, 1995     

Self-similar solutions and large time asymptotics for the dissipative quasi-geostrophic equation

We analyze the well-posedness of the initial value problem for the dissipative quasi-geostrophic equations in the subcritical case. Mild solutions are obtained in several spaces with the right homogeneity to allow the existence of self-similar solutions. While the only small self-similar solution in the strong L^p{\cal L}^{p} space is the null solution, infinitely many self-similar solutions do exist in weak- L^p{\cal L}^{p} spaces and in a recently introduced [7] space of tempered distributions. The asymptotic stability of solutions is obtained in both spaces, and as a consequence, a criterion of self-similarity persistence at large times is obtained.     

Differentiation of species of the Baccharis genus by HPLC and chemometric methods.

Phytochemical investigation of the aerial parts of three Baccharis species (Asteraceae family) was performed using HPLC and chemometric methods, with the objective of distinguishing between three morphologically very similar species: Baccharis genistelloides Persoon var. trimera (Less.) DC, B. milleflora (Less.) DC and B. articulata (Lam.) Persoon. With the help of Principal Component Analysis (PCA) and variance weights, it was possible to characterize the chromatographic profiles of the alcoholic extracts of the three species. Application of Soft Independent Modeling of Class Analogy (SIMCA) and K-Nearest Neighbor (KNN) methods on a training set of 74 extracts resulted in models that correctly classified all eight samples in an independent test set.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Detection of hepatocarcinoma in rats by integration of the fluorescence spectrum: Experimental model

The incorporation of spectroscopic techniques into diagnostic procedures may greatly improve the chances for precise diagnostics. One promising technique is fluorescence spectroscopy, which has recently been used to detect many different types of diseases. In this work, we use laser-induced tissue fluorescence to detect hepatocarcinoma in rats using excitation light at wavelengths of 443 and 532 nm. Hepatocarcinoma was induced chemically in Wistar rats. The collected fluorescence spectrum ranges from the excitation wavelength up to 850 nm. A mathematical procedure carried out on the spectrum determines a figure of merit value, which allows the detection of hepatocarcinoma. The figure of merit involves a procedure which evaluates the ratio between the backscattered excitation wavelength and the broad emission fluorescence band. We demonstrate that a normalization allowed by integration of the fluorescence spectra is a simple operation that may allow the detection of hepatocarcinoma.