Mechanistic Aspects of a Highly Active Dinuclear Zinc Catalyst for the Co‐polymerization of Epoxides and CO2

The dinuclear zinc complex reported by us is to date the most active zinc catalyst for the co‐polymerization of cyclohexene oxide (CHO) and carbon dioxide. However, co‐polymerization experiments with propylene oxide (PO) and CO₂ revealed surprisingly low conversions. Within this work, we focused on clarification of this behavior through experimental results and quantum chemical studies. The combination of both results indicated the formation of an energetically highly stable intermediate in the presence of propylene oxide and carbon dioxide. A similar species in the case of cyclohexene oxide/CO₂ co‐polymerization was not stable enough to deactivate the catalyst due to steric repulsion.     

Voltammetric Determination of Isoniazid Drug in Various Matrix by Using CuOx Decorated MW‐CNT Modified Glassy Carbon Electrode

Copper oxide decorated multi‐walled carbon nanotube (MWCNT) modified glassy carbon electrode (GCE) was prepared for determination of isoniazid (INZ) in various matrices. The electrochemical behavior of INZ was tested with the aid of Cyclic Voltammetry (CV) and quantitative experiments were performed by using Linear Sweep Voltammetry (LSV). Morphological and structural characterization of the modified electrode was performed by utilizing Scanning Electron Microscopy (SEM), X‐Ray Photoelectron Spectroscopy (XPS) while electrochemical characterization was performed by using CV and Electrochemical Impedance spectroscopy (EIS). The proposed sensor exhibited well defined anodic peak at 0.30 V for INZ at pH 6.0 medium. Under the optimum conditions, a linear relation between INZ concentration and peak current was observed in the range of 2.0×10^?7 to 5.0×10^?5 M. Limit of detection was calculated as 1.0×10^?8 M and repeatability and accuracy was found as 5.60 % and 91.0 % for 5.0 10^?7 M INZ by using 3 successive measurement, respectively. Then, the analytic performance of the electrode developed was tested by analyzing commercial tablets, artificial human serum and urine samples. The results indicated that satisfactory recoveries was observed for all issue.     

Synthesis of methyl 2-oxo-5-vinyl-2,5-tetrahydrofuran-3-carboxylate

A synthesis of methyl 2-oxo-5-vinyl-tetrahydrofuran-3-carboxylate involving five synthetic steps from commercially available 3,4-dihydroxybutene is reported.     

Efficient synthesis of ferrocenylenones by Friedel-Crafts acylation with EtAlCl2-Me3Al

Efficient synthesis of ferrocenylenones using a Friedel-Crafts acylation reaction is described. Acryloyl, methacryloyl, crotonoyl, cinnamoyl, and β-methylcrotonoyl chlorides react with ferrocene in the presence of a Lewis acid (EtAlCl₂ or EtAlCl₂-Me₃Al) to give the corresponding ferrocenylenones (acryloyl, methacryloyl, crotonoyl, cinnamoyl, and methylcrotonoylferrocenes) in good isolated yields. Besides ferrocenylenones, chloroactylferrocene is also synthesised by this method.     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Coligand role in the NHC nickel catalyzed C–F bond activation: investigations on the insertion of bis(NHC) nickel into the C–F bond of hexafluorobenzene

The reaction of [Ni(Mes₂Im)₂] (1) (Mes₂Im = 1,3-dimesityl-imidazolin-2-ylidene) with polyfluorinated arenes as well as mechanistic investigations concerning the insertion of 1 and [Ni(ⁱPr₂Im)₂] (1ipr) (ⁱPr₂Im = 1,3-diisopropyl-imidazolin-2-ylidene) into the C–F bond of C₆F₆ is reported. The reaction of 1 with different fluoroaromatics leads to formation of the nickel fluoroaryl fluoride complexes trans-[Ni(Mes₂Im)₂(F)(Ar^F)] (Ar^F = 4-CF₃-C₆F₄2, C₆F₅3, 2,3,5,6-C₆F₄N 4, 2,3,5,6-C₆F₄H 5, 2,3,5-C₆F₃H₂6, 3,5-C₆F₂H₃7) in fair to good yields with the exception of the formation of the pentafluorophenyl complex 3 (less than 20%). Radical species and other diamagnetic side products were detected for the reaction of 1 with C₆F₆, in line with a radical pathway for the C–F bond activation step using 1. The difluoride complex trans-[Ni(Mes₂Im)₂(F)₂] (9), the bis(aryl) complex trans-[Ni(Mes₂Im)₂(C₆F₅)₂] (15), the structurally characterized nickel(i) complex trans-[Ni^I(Mes₂Im)₂(C₆F₅)] (11) and the metal radical trans-[Ni^I(Mes₂Im)₂(F)] (12) were identified. Complex 11, and related [Ni^I(Mes₂Im)₂(2,3,5,6-C₆F₄H)] (13) and [Ni^I(Mes₂Im)₂(2,3,5-C₆F₃H₂)] (14), were synthesized independently by reaction of trans-[Ni(Mes₂Im)₂(F)(Ar^F)] with PhSiH₃. Simple electron transfer from 1 to C₆F₆ was excluded, as the redox potentials of the reaction partners do not match and [Ni(Mes₂Im)₂]⁺, which was prepared independently, was not detected. DFT calculations were performed on the insertion of [Ni(ⁱPr₂Im)₂] (1ipr) and [Ni(Mes₂Im)₂] (1) into the C–F bond of C₆F₆. For 1ipr, concerted and NHC-assisted pathways were identified as having the lowest kinetic barriers, whereas for 1, a radical mechanism with fluoride abstraction and an NHC-assisted pathway are both associated with almost the same kinetic barrier.

A combined experimental and theoretical study on the mechanism of the C–F bond activation of C₆F₆ with [Ni(NHC)₂] is provided.     

The structure of magnesium alanate

Mg(AlH(4))(2) was produced as a nanocrystalline powder by metathesis of NaAlH(4) and MgCl(2). Starting with a structure estimation which was developed from an evaluation of FTIR data and comparison of structural properties of two solvent adducts, quantum chemical calculations were performed on the density functional theory (DFT) level. The calculated atomic positions were used to simulate an X-ray powder diffraction pattern, based on a trigonal unit cell. The simulated pattern was congruent to experimental data. Thus, magnesium alanate exhibits a CdI(2) layer structure, the layers being formed by Mg atoms occupying the Cd sites and AlH(4) tedrahedra occupying the sites of the iodine atoms in CdI(2).     

Enantioselective reduction of ketones with borane catalyzed by cyclic β- amino alcohols prepared from proline

New catalysts have been prepared from (S)- and (R)- proline and the asymmetric borane reduction of prochiral ketones using these catalysts has been studied. The secondary alcohols were obtained in 76–95% yield with 57– 96% enantiomeric excesses.     

Detection of toluene diisocyanate with a coated quartz piezoelectric crystal: Part 3. Practical coatings for a humidity-corrected detector

Dithizone and tri-n-octylphosphine oxide (TOPO) were tested as coatings for quartz piezoelectric crystals to be used in a detector for touene diisocyanate (TDI). Cobalt(II) chloride and polyethylene glycol (PEG) with molecular weights of 400 and 1540 were tested for suitability as coatings for detecting humidity variations so that correction for humidity could be obtained from a two-crystal system. Sensitivities for TDI of 12 and 75 Hz ppm^?1 were found with dithizone and TOPO, respectively, between 0 and 1 ppm TDI. Cobalt chloride-coated crystals showed a sensitivity for water of 0.053 Hz ppm^?1 at 8000 ppm water and about 40 Hz ppm^?1 for TDI at the 2 ppm level. PEG-400 and PEG-1540 provided sensitivities to water of 0.038 and 0.051 Hz ppm^?1 respectively, and the response was linear over the range 9000—13 000 ppm water. All coatings showed irreversible behaviour towards TDI.