Mass spectrometric study of some cycloalkane/ene-condensed 2-thioxo-2935556-pyrimidin-4(1H)-ones and cycloalkane/ene-condensed [l,3] thwzino [3,2-a]-pyrimidinones under electron impact

The mass spectra of four cycloalkane/ene cis- and trans-condensed 2-thioxo-2,3,5,6-tetrahydropyrimidin-4(1H)-ones and the corresponding cycloalkane/ene cis- and trans-condensed [l,3]thiazino[3,2-a]pyrimidinones were measured. Fragmentation pathways were confirmed by metastable ion analyses and exact mass measurements. The bicyclic isomers were easy to distinguish from each other, whereas the corresponding tricyclic isomeric adducts gave fairly similar mass spectra, owing to their favoured reiro-Diels- Alder fragmentations accompanied by the migration of one or two hydrogen atoms.     

Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.     

Immunochemical determination of dioxins in sediment and serum samples

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are considered highly toxic contaminants and the environmental and biological monitoring of these compounds is of great concern. Immunoassays may be used as screening methods to satisfy the growing demand for rapid and low cost analysis. In this work, we describe the application of an immunoassay that uses 2,3,7-trichloro-8-methyldibenzo-p-dioxin (TMDD) as a surrogate standard for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to sediment and human serum samples. Sample extraction and preparation methods were developed with the aim to establish the simplest, cost-effective and efficient removal of the matrix interferences in the enzyme-linked immunosorbent assay (ELISA). The overall method for sediments is based on a hexane extraction; clean up by a multilayered silica gel column and an activated carbon column; an organic solvent exchange with DMSO–Triton X-100 and ELISA measurement. The gas chromatography–high resolution mass spectrometry (GC–HRMS) validation studies (n = 13) revealed that the method is suitable for the toxic equivalents (TEQ) screening of dioxin in sediments with a method detection limit of about 100 pg g⁻¹ dry sediment with a precision of 13–33% R.S.D. The analysis of a large number of samples originating from different sources would be required to establish more precisely the screening level, as well as the number of false positives and negatives of dioxin TEQ by the immunoassay for sediments. The immunoassay method for sediment analysis offers improvement in speed, sample throughput, and cost in comparison to GC–HRMS. Dioxins were determined in serum samples after a simple liquid–liquid extraction and solvent exchange into DMSO–Triton X-100 without further dilution. The current method (approximate method LOQ of 200 pg ml⁻¹ serum) is not sufficiently sensitive for the determination of dioxins in serum to measure acceptable exposure limit.     

Capillary electrophoretic detection in apolipoprotein E genotyping

We describe the application of capillary electrophoresis to detect DNA fragments, obtained after amplifying a part of the apolipoprotein E (apoE) gene with polymerase chain reaction (PCR). Compared to conventional agarose slab gel electrophoresis (AGE), CE appears the method of choice with regard to resolution and sensitivity, to detect DNA fragments in the range of 20-100 base pairs. Especially discrimination between apoE2/E2 and apoE2/E3 genotypes is more reliable with CE than with AGE, this being of great clinical value in the diagnosis of familiary dysbetalipoproteinemia.     

Characteristics and safety of nano-sized cellulose fibrils

A finely ground fibrillated cellulose was fractionated into separate size fractions. The characteristics of the smallest size fractions were studied, and the toxicity to humans was tested as part of a safety assessment. Morphological studies performed with state-of-the-art methods, such as scanning electron microscopy and atomic force microscopy, showed that the fraction obtained consisted of long thin fibrils but also larger fibril agglomerates, and spherical particles were present. The finest fraction did not show any sub-lethal effects as assessed by RNA inhibition test in vitro, nor were there any indications of genotoxicity as tested by the Ames test in vitro. Systemic effects tested in vivo with the nematode were also absent. No cytotoxic effects were seen in the highest tolerated dose test in vitro, but some indication of cytotoxicity was observed in the total protein content test in vitro at the highest sample concentration. The significance of this toxicity test result should be addressed in relation to the other toxicity tests, in which no toxicity was observed, with special emphasis on the in vivo test. Given this, the overall toxicity analyses support the conclusion that nano-scale cellulose fibrils can be considered to be safe towards humans. However, the reason for the positive cytotoxicity test result and, in addition, the effect of the biocide used in sample preservation on the toxicity tests need to be clarified before generalizing these results and declaring nanocellulose to be unambiguously safe.     

1H MRS detection of glycine residue of reduced glutathione in vivo

Glutathione (GSH) is a powerful antioxidant found inside different kinds of cells, including those of the central nervous system. Detection of GSH in the human brain using ¹H MR spectroscopy is hindered by low concentration and spectral overlap with other metabolites. Previous MRS methods focused mainly on the detection of the cysteine residue (GSH-Cys) via editing schemes. This study focuses on the detection of the glycine residue (GSH-Gly), which is overlapped by glutamate and glutamine (Glx) under physiological pH and temperature. The first goal of the study was to obtain the spectral parameters for characterization of the GSH-Gly signal under physiological conditions. The second goal was to investigate a new method of separating GSH-Gly from Glx in vivo. The characterization of the signal was carried out by utilization of numerical simulations as well as experiments over a wide range of magnetic fields (4.0–14 T). The proposed separation scheme utilizes J-difference editing to quantify the Glx contribution to separate it from the GSH-Gly signal. The presented method retains 100% of the GSH-Gly signal. The overall increase in signal to noise ratio of the targeted resonance is calculated to yield a significant SNR improvement compared to previously used methods that target GSH-Cys residue. This allows shorter acquisition times for in vivo human clinical studies.     

Multi-scale study of the mineral porosity of veined gneiss and pegmatitic granite from Olkiluoto,Western Finland

The purpose of this work was to support the long-term experiments for investigation of rock matrix retention properties at the spent nuclear fuel repository site ONKALO, in Olkiluoto, Western Finland. Towards this end, rock samples were characterised in terms of porosity connected to mineralogy, with emphasis on pore sizes, and fillings. Both filled and unfilled pores were found with unfilled pores being majority in the pegmatitic granite veins of the mostly veined gneiss samples. It was found that the fillings were often connected to local alteration and the alteration caused variation in the range of pore sizes.     

Physical Properties and Erosion Behavior of Poly(trimethylene carbonate‐co‐ε‐caprolactone) Networks

Form‐stable resorbable networks are prepared by gamma irradiating trimethylene carbonate (TMC)‐ and ε‐caprolactone (CL)‐based (co)polymer films. To evaluate their suitability for biomedical applications, their physical properties and erosion behavior are investigated. Homopolymer and copolymer networks that are amorphous at room temperature are flexible and rubbery with elastic moduli ranging from 1.8 ± 0.3 to 5.2 ± 0.4 MPa and permanent set values as low as 0.9% strain. The elastic moduli of the semicrystalline networks are higher and range from 61 ± 3 to 484 ± 34 MPa. The erosion behavior of (co)polymer networks is investigated in vitro using macrophage cultures, and in vivo by subcutaneous implantation in rats. In macrophage cultures, as well as upon implantation, a surface erosion process is observed for the amorphous (co)polymer networks, while an abrupt decrease in the rate and a change in the nature of the erosion process are observed with increasing crystallinity. These resorbable and form‐stable networks with tuneable properties may find application in a broad range of biomedical applications.

     

Direct Evidence of Significantly Different Chemical Behavior and Excited‐State Dynamics of 1,7‐ and 1,6‐Regioisomers of Pyrrolidinyl‐Substituted Perylene Diimide

Novel bay‐functionalized perylene diimides with additional substitution sites close to the perylene core have been prepared by the reaction between 1,7(6)‐dibromoperylene diimide 6 (dibromo‐PDI) and 2‐(benzyloxymethyl)pyrrolidine 5 . Distinct differences in the chemical behaviors of the 1,7‐ and 1,6‐regioisomers have been discerned. While the 1,6‐dibromo‐PDI produced the corresponding 1,6‐bis‐substituted derivative more efficiently, the 1,7‐dibromo‐PDI underwent predominant mono‐debromination, yielding a mono‐substituted PDI along with a small amount of the corresponding 1,7‐bis‐substituted compound. By varying the reaction conditions, a controlled stepwise bis‐substitution of the bromo substituents was also achieved, allowing the direct synthesis of asymmetrical 1,6‐ and 1,7‐PDIs. The compounds were isolated as individual regioisomers. Fullerene (C₆₀) was then covalently linked at the bay region of the newly prepared PDIs. In this way, two separate sets of perylene diimide–fullerene dyads, namely single‐bridged (SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀) and double‐bridged (DB‐1,7‐PDI‐C₆₀ and DB‐1,6‐PDI‐C₆₀), were synthesized. The fullerene was intentionally attached at the bay region of the PDI to achieve close proximity of the two chromophores and to ensure an efficient photoinduced electron transfer. A detailed study of the photodynamics has revealed that photoinduced electron transfer from the perylene diimide chromophore to the fullerene occurs in all four dyads in polar benzonitrile, and also occurs in the single‐bridged dyads in nonpolar toluene. The process was found to be substantially faster and more efficient in the dyads containing the 1,7‐regioisomer, both for the singly‐ and double‐bridged molecules. In the case of the single‐bridged dyads, SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀, different relaxation pathways of their charge‐separated states have been discovered. To the best of our knowledge, this is the first observation of photoinduced electron transfer in PDI‐C₆₀ dyads in a nonpolar medium.