Effects of Heat Treatments on Various Characteristics of Ready-to-Eat Zucchini Purees Enriched with Anise or Fennel

Galactagogue herbs, also known as natural lactation adjuvants, are frequently used to stimulate breast milk production. Due to their antioxidant activity and phenolic content, anise (Pimpinella anisum L.) and fennel (Foeniculum vulgare L.) were chosen to increase the added value of zucchini (Cucurbita pepo L.) purees. At the same time, this work aimed to determine the influence of heat treatment on various characteristics of the final product. The phytochemical content, color parameters, and rheological and textural parameters of zucchini purees enriched with herbal aqueous extracts were determined after processing and after one week of storage (4 °C). In the case of antioxidant activity, samples registered a variation between 6.62 ± 1.71 and 38.32 ± 3.85 µM Trolox/g DW for the samples processed by steam convection. The total difference color parameter (ΔE) increased seven times after one week of storage compared to samples at T₀. Fennel and anise aqueous extracts helped improve the rheological behavior of zucchini samples both by steam and hot air convection. This study may serve as a springboard for future investigations and clinical trials into the scientific validity and safety of ready-to-eat foods with special destinations.     

Assessment of Cucurbita spp. Peel Extracts as Potential Sources of Active Substances for Skin Care and Dermatology

By-products of cultivated plants are one of the major environmental concerns worldwide. Due to the high concentration of bioactive chemicals, such waste may be considered hazardous due to the interference with the plant growth, deterioration of the drinking water quality or toxic effects on sensitive marine organisms. Moreover, plant-derived by-products, with proper handling, may represent a low-cost source of bioactive compounds potentially important for pharmaceutical and cosmetics industries. The aim of the study was to evaluate the phytochemical composition, antioxidant activity, the influence of tyrosinase activity, in vitro sun protecting factor and cytotoxicity of 15 extracts from peels of five cultivars of Cucurbita maxima and C. moschata. The extracts were prepared using “green solvents” (water, 50% propylene glycol, and 20% ethanol) and ultrasound-assisted extraction. The performed analysis showed that the peel extracts from various cultivars differ significantly in respect to the phytochemical content and activity. The type of solvent also had a significant impact on the extract’s composition and bioactivity. Aqueous peel extracts contained the highest amounts of flavonoids, showed the greatest antioxidant potential and the most significant in vitro SPF values. In vitro studies showed that the analyzed peel extracts are not cytotoxic for human keratinocytes up to the concentration of 1000 µg/mL and thus might be considered as non-irritant for the skin. The study confirms the potential application of peel extracts from Cucurbita spp. cultivars in cosmetic products.     

An alternative approach to controlled release of oxprenolol from the implantable delivery system based on biodegradable copolymer and genistein

This paper describes the development of covalent star-shaped poly(L-lactide/?-caprolactone) random copolymer-oxprenolol (OXP) conjugates as a potential approach to controlling drug release from implantable delivery systems. We prepared synthesized materials containing 14–17 mol% OXP, which were conjugated via an ester bond. The conjugates, which were composed of biodegradable copolyester chains, natural genistein as a central core and drug, were characterized by hydrogen nuclear magnetic resonance (¹H-NMR), Fourier transform infrared spectroscopy (FTIR) and viscosity methods. We evaluated the cyto- and genotoxicity of the synthesized copolymeric matrices, followed by the conjugates, with bacterial luminescence, protozoan and Salmonella typhimurium TA1535 assays. Furthermore, we performed in vitro mammalian assays of the obtained products with V79 cells. We found that the in vitro release of OXP from the obtained star-shaped conjugates was dependent on the structure of the synthesized biodegradable matrices.     

Identification of Mushroom and Murine Tyrosinase Inhibitors from Achillea biebersteinii Afan. Extract

Growing scientific evidence indicates that Achillea biebersteinii is a valuable source of active ingredients with potential cosmetic applications. However, the data on its composition and pharmacological properties are still insufficient. This study aims to optimize the extraction procedure of the plant material, evaluate its phytochemical composition, and compare anti-tyrosinase potential of A. biebersteinii extracts obtained by various methods. In order to identify compounds responsible for the tyrosinase inhibitory activity of A. biebersteinii, the most active anti-tyrosinase extract was fractionated by column chromatography. The fractions were examined for their skin lightening potential by mushroom and murine tyrosinase inhibitory assays and melanin release assay. HPLC-ESI-Q-TOF-MS/MS analysis of the total extract revealed the presence of several phenolic acids, flavonoids, flavonoid glucosides, and carboxylic acid. Among them, fraxetin-8-O-glucoside, quercetin-O-glucopyranose, schaftoside/isoschaftoside, gmelinin B, 1,3-dicaffeoylquinic acid (1,3-DCQA), and ferulic acid were found in the fractions with the highest skin lightening potential. Based on obtained qualitative and quantitative analysis of the fractions, it was assumed that the caffeoylquinic acid derivatives and dicaffeoylquinic acid derivatives are more likely responsible for mushroom tyrosinase inhibitory activity of A. biebersteinii extracts and fractions. Ferulic acid was proposed as the most active murine tyrosinase inhibitor, responsible also for the reduced melanin release from B16F10 murine melanoma cells.     

Two Ecdysteroids Isolated from Micropropagated Lychnis flos-cuculi and the Biological Activity of Plant Material

Genetically uniform plant material, derived from Lychnis flos-cuculi propagated in vitro, was used for the isolation of 20-hydroxyecdysone and polypodine B and subjected to an evaluation of the antifungal and antiamoebic activity. The activity of 80% aqueous methanolic extracts, their fractions, and isolated ecdysteroids were studied against pathogenic Acanthamoeba castellani. Additionally, a Microtox^® acute toxicity assay was performed. It was found that an 80% methanolic fraction of root extract exerts the most potent amoebicidal activity at IC₅₀ of 0.06 mg/mL at the 3rd day of treatment. Both ecdysteroids show comparable activity at IC₅₀ of 0.07 mg/mL. The acute toxicity of 80% fractions at similar concentrations is significantly higher than that of 40% fractions. Crude extracts exhibited moderate antifungal activity, with a minimum inhibitory concentration (MIC) within the range of 1.25–2.5 mg/mL. To the best of our knowledge, the present report is the first to show the biological activity of L. flos-cuculi in terms of the antifungal and antiamoebic activities and acute toxicity. It is also the first isolation of the main ecdysteroids from L. flos-cuculi micropropagated, ecdysteroid-rich plant material.     

Prediction of reverberation time using the residual minimization method

In many practical situations the assumption of sound field dispersion needed for the application of the Sabine’s theory is not fulfilled. In general, sound field is sufficiently dispersed if there are no large differences in the dimensions of the room, limiting partitions are not parallel, or the sound absorbing material is uniformly distributed. In practice, very few of these requirements are satisfied. As a result, a number of other formulas describing reverberation time have been created, for example Fitzroy’s or Neubauer’s formulas. However, these methods in many cases differ significantly from the actual measurements. The paper presents a method used to estimate reverberation time as well as its applicability potential involving laboratory models and auditorium rooms. The proposed method can be classified into a group of learning methods and involves the use of statistical methods which allow for approximation with the use of the least squares method.     

Effects of the physicochemical properties of titanium dioxide nanoparticles, commonly used as sun protection agents, on microvascular endothelial cells

Until now, the potential effects of titanium dioxide (TiO₂) nanoparticles on endothelial cells are not well understood, despite their already wide usage. Therefore, the present work characterizes six TiO₂ nanoparticle samples in the size range of 19 × 17 to 87 × 13 nm, which are commonly present in sun protection agents with respect to their physicochemical properties (size, shape, ζ-potential, agglomeration, sedimentation, surface coating, and surface area), their interactions with serum proteins and biological impact on human microvascular endothelial cells (relative cellular dehydrogenase activity, adenosine triphosphate content, and monocyte chemoattractant protein-1 release). We observed no association of nanoparticle morphology with the agglomeration and sedimentation behavior and no variations of the ζ-potential (?14 to ?19 mV) in dependence on the surface coating. In general, the impact on endothelial cells was low and only detectable at concentrations of 100 μg/ml. Particles containing a rutile core and having rod-like shape had a stronger effect on cell metabolism than those with anatase core and elliptical shape (relative cellular dehydrogenase activity after 72 h: 60 vs. 90 %). Besides the morphology, the nanoparticle shell constitution was found to influence the metabolic activity of the cells. Upon cellular uptake, the nanoparticles were localized perinuclearly. Considering that in the in vivo situation endothelial cells would come in contact with considerably lower nanoparticle amounts than the lowest-observable adverse effects level (100 μg/ml), TiO₂ nanoparticles can be considered as rather harmless to humans under the investigated conditions.     

Effect of the interface on separation in multicapillary gas chromatography-based hyphenated techniques for speciation analysis of organometallic compounds

This paper reports the effect of transfer line (TL) internal diameter (i.d.) on gas chromatographic separation characteristics such as efficiency and speed, when a multicapillary (MC) column is used for speciation analysis of mercury. Five different TL consisting of fused-silica capillaries with 0.15, 0.20, 0.25, 0.32, and 0.53 mm i.d. are compared. The separation efficiency and total chromatographic run time are critically affected by the i.d. of the TL. Narrow capillaries (i.d.0.20 mm) produce minimum peak dispersion whereas wide capillaries result in narrow peaks and shorter chromatographic analysis times. A thermodynamic approach is proposed to describe the motion of the analytes through the separation column and TL. The model provides good agreement with the experimental data for high pressures (35 psig) and wide TL (0.25 mm i.d.).Dedicated to the memory of Wilhelm Fresenius     

Contributions to the degenerated branching mechanism of the thermal decomposition of ammonia

By continuing our studies on the reaction kinetics and mechanism of ammonia thermal decomposition, new evidences are brought about supporting the indirectly branched chain mechanism advanced previously. The dependence of the induction period of the hydrogen formation as a reaction final product on the maximum concentration of hydrazine as the reaction molecular intermediate evidences indirectly branched chain mechanism affording preponderantly the hydrogen formation from hydrazine. The branching factor value of 0.00136 s⁻¹ was found by means of three laws specific to the reaction developing according to three rules specific to the degenerated branching. This value indicates degenerated branching occurring rather as a scarce event according to literature data where this factor is shown to be between 0.00016 and 0.01666 s⁻¹.     

The Hardy classes for functions in the class MV[α, k]

Suppose that f(z) = z + a₂z² + ··· + a_nz_n + ··· is regular in the unit disc $\text{D}\text{with}\text{[f(z) f′}\text{(z)}\text{z] ≠ 0}\text{in}\text{D}$, and further let α ? 0 and k ? 2. If $\text{∝}{}^{\mathrm{2\pi }}{}_{\mathrm{o}}\text{¦}\text{Re}\text{{(1 ? α)z[}\text{f′(z)}\text{f(z)}\text{] + α(1 + z[}\text{f″(z)}\text{f′(z)}\text{])}¦ dθ ? kπ}\text{for}\text{z ? D}$, then f(z) is said to belong to the class MV[α, k]. This class contains many of the special classes of regular and univalent functions. The authors determine the Hardy classes of which f(z), f′(z) and f″(z) belong and obtain growth estimates of a_n.