Indirect Methods For Determination of The Protective Effects of Coating Films on The Surface of Crystals

The extents of the protective effects of coating films on the surface of crystals were determined. Three different samples were made with different quantities of coating fluid (Sepifilm LP 010 in 10% aqueous solution). Since the atomizing rate was constant, the coating time increased in parallel with the volume of coating fluid applied. The direct measurement of film thickness and smoothness is very difficult, and therefore indirect methods were used. Dimenhydrinate was chosen as model drug; this is a heat-sensitive antihistamine with a low melting point. This temperature can be reached during the tableting process. The behaviour of samples on exposure to heat was examined by differential scanning calorimetry. The water uptakes of the samples were determined with an Enslin apparatus. Plasticity was studied with an instrumented tablet machine. These indirect methods (thermal conductivity, water uptake and plasticity measurements) revealed connections between the results of the various experiments. An overlong coating time decreased the protective effect of the coating film. This revised version was published online in August 2006 with corrections to the Cover Date.     

Stochastic analysis in life office management: applications to large annuity portfolios

The paper deals with the riskiness analysis for a large portfolio of life annuities. By means of the limiting distribution of the present value of the portfolio, in the first part of the paper a model for evaluating the investment and the projection risks is presented. In the second part, with regard to the investment risk's effects, the insolvency risk is measured considering the cumulative probability distribution function of the discounted average cost per policy. Copyright © 2003 John Wiley & Sons, Ltd.     

Harmonic and intermodulation distortion modeling in IM-DD multi-band radio over fiber links exploiting injection locked lasers

A comprehensive numerical tool has been developed for the evaluation of the performances of Radio over Fiber (RoF) links intended for wireless signal distribution.At the transmitter end an appropriate set of rate equations allows to model the optical source as a solitary laser or as an appropriately injection locked laser. The optical channel is modeled putting into account the combined effect of fiber dispersion, laser source non ideal performances (e.g. non-linear effects, frequency chirp), and quadratic detection of the receiving photodiode. The simulation model developed can be a useful tool at the design stage allowing a preliminary evaluation of the characteristics of real RoF links.     

DRIFTS study of surface reactivity to NO2 by zinc nanoparticle aggregates and zinc hollow nanofibers

Zinc nanostructures synthesized with different morphologies from the same evaporation/condensation technique are studied with concern to surface reactivity to NO₂ by Diffuse Reflectance Infrared Fourier Transformed Spectroscopy (DRIFTS). Synthesis of nanopowders is obtained, according to previous work, by gas flow thermal evaporation at 540 °C of bulk Zn grains. Two types of Zn powders are obtained and studied in experiments. The first one is collected on the cold walls of the reactor as a deposit produced by thermophoretic effect. It is constituted by grains (∼10 μm) originated by the stratification of smaller aggregates (∼200 nm) and isolated primary particles (∼50 nm) born in the gas flow. The second type of powder is grown from the condensation of Zn chemical vapors within the expansion orifice of the quartz reactor after relatively long time (∼1 h) deposition process. It is constituted mainly by hollow Zn nanofibers with external and internal diameter about 100 and 60 nm. Preliminary characterization of the two types of powders is made by SEM, TEM, XRD. Thereafter, the two types of samples are studied by DRIFTS at variable temperature (VT). Comparison is made between the home-synthesized nanopowders with respect to commercial Zn standard dust. The Zn hollow nanofibers when exposed to NO₂ are found to exhibit dramatic reactivity, which is not observed at all either in the case of clustered aggregate zinc or of commercial Zn dust powders. Results indicate that, at increasing temperature from RT to 300 °C, the hollow nanofibers surface reacts distinctively with adsorbant gas NO₂, with contemporary formation of a progressively growing narrow absorption band at 2500 cm⁻¹ and contemporary depression of a doublet (∼1600-1628 cm⁻¹) band. In order to justify this striking spectral feature, we propose the occurring of a possible polymerization process at nanofibers surface where most probably as a consequence of pre-treatment and exposure to gas NO₂ a very thin film of ZnO is formed. The possible role of huge specific surface of hollow nanofibers as inferred by preliminary SEM, TEM, XRD studies is discussed.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

A Relaxation Scheme for Solving the Boltzmann Equation Based on the Chapman-Enskog Expansion

Abstract In [16] a visco-elastic relaxation system, called the relaxed Burnett system, was proposed by Jinand Slemrod as a moment approximation to the Boltzmann equation. The relaxed Burnett system is weaklyparabolic, has a linearly hyperbolic convection part, and is endowed with a generalized eotropy inequality. Itagrees with the solution of the Boltzmann equation up to the Burnett order via the Chapman-Enskog expansion. We develop a one-dimensional non-oscillatory numerical scheme based on the relaxed Burnett system forthe Boltzmann equation. We compare numerical results for stationary shocks based on this relaxation scheme,and those obtained by the DSMC (Direct Simulation Monte Carlo), by the Navier-Stokes equations and bythe extended thermodynamics with thirteen moments (the Grad equations). Our numerical experiments showthat the relaxed Burnett gives more accurate approximations to the shock profiles of the Boltzmann equationobtained by the DSMC, for a range of Mach numbers for hypersonic flows, th     

Thin-walled Beams: A Derivation of Vlassov Theory via Γ-Convergence

This paper deals with the asymptotic analysis of the three-dimensional problem for a linearly elastic cantilever having an open cross-section which is the union of rectangles with sides of order ε and ε ², as ε goes to zero. Under suitable assumptions on the given loads and for homogeneous and isotropic material, we show that the three-dimensional problem Γ-converges to the classical one-dimensional Vlassov model for thin-walled beams.