Solid Lipid Nanoparticles (SLNs): Preparation and Properties of Calix[4]resorcinarene Derived Systems.

Solid Lipid Nanoparticles (SLNs) have been prepared fromc-2,c-8,c-14,c-20-tetraundecyl-4,6,10,12,16,18,22,24-octahydroxyresorc[4]areneas colloidal suspensions. Photon Correlation Spectroscopy studies revealed aparticle hydrodynamic diameter of 150 nm. Non-contact mode Atomic ForceMicroscopy allows observation of the particles as slightly flattened sphericalobjects of 236 (±40) nm diameter and 145 (±40) nm height. Thestudy of the preparation parameters showed that shear force does not affectthe hydrodynamic size of the SLNs. In contrast, the viscosity and the pH ofthe aqueous phase, the amphiphile concentration in the organic phase and thevolume of organic phase used, all lead to variation in the size of the particles.In term of post preparation parameters only the ionic strength has been shownto affect significantly the particle size; while the pH of the storing solution,microwave, ultrasonic and thermal treatments do not. Short and long-termstability studies have been performed to measure the effect of the ionic strengthon the stability of the particles. The use of carbohydrate cryoprotectants does notallow re-dispersion of the colloidal suspension after freeze-drying.     

Monitoring the packet gap of real-time packet traffic

Real-time packet traffic is characterized by a strict deadline on the end-to-end time delay and an upper bound on the information loss. Due to the high correlation among consecutive packets, the individual packet loss does not well characterize the performance of real-time packet sessions. An additional measure of packet loss is necessary to adequately assess the quality of each real-time connection. The additional measure considered here is the average number of consecutively lost packets, also called the average packet gap. We derive a closed form for the average packet gap for the multiclassG/G/m/B queueing system in equilibrium and show that it only depends on the loss behavior of two consecutive packets. This result considerably simplifies the monitoring process of real-time packet traffic sessions. If the packet loss process is markovian, the consecutive packet loss has a geometric distribution.     

A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

Efficient synthesis of 2- and 3-substituted-2,3-dihydro [1,4]dioxino[2,3-b]pyridine derivatives

A versatile new approach for the synthesis in three steps of 2-substituted-2,3-dihydro[1,4]dioxino[2,3-b]pyridines B via a Smiles rearrangement using easily available reagents is described. A study illustrating the influence of experimental conditions on the progress of the reaction is reported.     

Synthesis of 2-substituted-2,3- dihydro-1,4-dioxino[2,3-b]pyridine derivatives

[reaction--see text] A variety of 2-substituted-2,3-dihydro-1,4-dioxino[2,3-b]pyridines B have been synthesized from the readily available 2-nitro-3-oxiranylmethoxypyridine 1 via a Smiles rearrangement. We demonstrate how variations of reaction conditions affect the product distribution of A and B.     

Application of personal microcomputers in the analytical laboratory--I: Potentiometric analysis

A novel general-purpose interface-controller unit has been designed and applied in potentiometric analysis. The unit is operated by a personal microcomputer programmed in BASIC. The interface-controller permits direct reading of specific ion-electrodes and can activate, under program control, laboratory instruments such as motor-driven burettes. The interface-controller is expendable to 16 analogue input channels, 16 binary (logic) input lines and 16 control relays but requires only one microcomputer I/O port (a total of 9 I/O lines) to handle all operations. Analogue to digital conversion is realized by counting, with the microcomputer, the output frequency of an analogue-to-frequency converter. This inexpensive method is effective in rejecting interfering signals such as power-line interference. The system has been applied in potentiometric titration analysis for determining the apparent dissociation constants of carbonic acid in sea-water and Dead Sea brines, and for ammonia determination with a gas-sensing electrode.     

Solid-phase microextraction of hop volatiles. Potential use for determination and verification of hop varieties

The composition of hop essential oil is an important tool for evaluation of hop quality. As each hop variety has a typical essential oil pattern (fingerprint), hop oil analyses can be used to distinguish between hop varieties. The headspace solid-phase microextraction (SPME) method as described in this contribution is a simple sample preparation technique and represents an alternative procedure for essential oil fingerprint determination. Different SPME parameters (extraction temperature, extraction time and sample mass) were studied and the results were compared with those obtained by the routine distillation method. It is shown that SPME results can be used for determination and verification of varieties grown in Slovenia by means of principal components analysis.