Amine‐cured epoxy/clay nanocomposites. II. The effect of the nanoclay aspect ratio

The thermophysical and mechanical properties of a nanocomposite material composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay are reported. The storage modulus at 100 °C, which was above the glass‐transition temperature (T_g), increased approximately 350% with the addition of 10 wt % (6.0 vol %) of clay. Below the T_g, the storage modulus at 30 °C increased 50% relative to the value of unfilled epoxy. It was determined that the T_g linearly increased as a function of clay volume percent. The tensile modulus of epoxy at room temperature increased approximately 50% with the addition of 10 wt % of clay. The reinforcing effect of the organoclay nanoplatelets is discussed with respect to the Tandon–Weng and Halpin–Tsai models. A pseudoinclusion model is proposed to describe the behavior of randomly oriented, uniformly dispersed platelets in nanocomposite materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4391–4400, 2004     

Influence of surfactant and lipid chain length on the solubilisation of phosphatidylcholine vesicles by micelles comprised of polyoxyethylene sorbitan monoesters

Photon correlation spectroscopy and freeze-fracture electron microscopy have been used to determine the ability of a range of micelle-forming, polyoxyethylene (20) sorbitan monoesters (Tweens) to solubilise vesicles prepared from phosphatidylcholines of different acyl chain lengths and degrees of saturation with a view to rationalising (in terms of their membrane toxicity) which of the micelle-forming surfactants to use as drug delivery vehicles. The phosphatidylcholines used were dimyristoyl-, dipalmitoyl-, distearoyl- and dioleoylphosphatidylcholine (DMPC, DPPC, DSPC and DOPC, respectively) while the nonionic polyoxyethylene sorbitan monoesters studied were polyoxyethylene (20) sorbitan monolaurate (Tween 20), a 9:1 weight ratio mixture of polyoxyethylene (20) sorbitan monopalmitate and monostearate (Tween 40), a 1:1 weight ratio mixture of polyoxyethylene (20) sorbitan monopalmitate and monostearate (Tween 60), and polyoxyethylene (20) sorbitan monooleate (Tween 80). The ability of the Tween micelles to solubilise phospholipid vesicles was found to depend both upon the length of the surfactant acyl chain and the length of the acyl chains of the phospholipid comprising the vesicle. Vesicles composed of long saturated diacyl chain phospholipids, namely DSPC and DPPC, were the most resistant to solubilisation, while those prepared from the shorter acyl chained DMPC were more readily solubilised. In terms of their solubilisation behaviour, vesicles made from phospholipids containing long, unsaturated acyl chains, namely DOPC behaved more akin to those vesicles prepared from DMPC. None of the Tween surfactants were effective at solubilising vesicles prepared from DPPC or DSPC. In contrast, there were clear differences in the ability of the various surfactants to solubilise vesicles prepared from DMPC and DOPC, in that micelles formed from Tween 20 were the most effective solubilising agent while those formed by Tween 60 were the least effective. As a consequence of these observations it was considered that Tween 60 was the surfactant least likely to cause membrane damage in vivo and, therefore, is the most suitable surfactant for use as a micellar drug delivery vehicle.     

Extension of a combined analytical/numerical initial value problem solver for unsteady periodic flow

Here we describe analytical and numerical modifications that extend the Differential Reduced Ejector/ mixer Analysis (DREA), a combined analytical/numerical, multiple species ejector/mixing code developed for preliminary design applications, to apply to periodic unsteady flow. An unsteady periodic flow modelling capability opens a range of pertinent simulation problems including pulse detonation engines (PDE), internal combustion engine ICE applications, mixing enhancement and more fundamental fluid dynamic unsteadiness, e.g. fan instability/vortex shedding problems. Although mapping between steady and periodic forms for a scalar equation is a classical problem in applied mathematics, we will show that extension to systems of equations and, moreover, problems with complex initial conditions are more challenging. Additionally, the inherent large gradient initial condition singularities that are characteristic of mixing flows and that have greatly influenced the DREA code formulation, place considerable limitations on the use of numerical solution methods. Fortunately, using the combined analytical–numerical form of the DREA formulation, a successful formulation is developed and described. Comparison of this method with experimental measurements for jet flows with excitation shows reasonable agreement with the simulation. Other flow fields are presented to demonstrate the capabilities of the model. As such, we demonstrate that unsteady periodic effects can be included within the simple, efficient, coarse grid DREA implementation that has been the original intent of the DREA development effort, namely, to provide a viable tool where more complex and expensive models are inappropriate. Copyright © 2002 John Wiley & Sons, Ltd.     

Electrochemical reduction of Bi2Sr2Ca1Cu2O8 superconductor single crystals

Single crystals and polycrystalline pellets of the high-temperature cuprate superconductor Bi₂Sr₂Ca₁Cu₂O₈ were doped at room temperature by electrochemical reduction at > 95% Coulombic efficiency using lithium dopant ions in propylene carbonate electrolyte. Cyclic voltammetry and potential step measurements on single crystals suggest an unusual reduction mechanism, with a diffusion coefficient for Li⁺ in the c-axis direction of bulk superconductor of ca. 3 × 10⁻¹¹ cm²s⁻¹. Sintered pellets of polycrystalline powder could be doped more rapidly, with an apparent diffusion coefficient of 7 × 10⁻⁸ cm²s⁻¹. X-ray susceptibility analysis show extensive disordering occurs on heavy Li doping, with a first-order transition from a crystalline/superconducting to an amorphous/non-superconducting phase. Single, crystals of Bi₂Sr₂Ca₁Cu₂O₈ exhibited a color change on reduction from metallic gray to golden bronze. The reduced material was highly air-sensitive, forming a hydroxide surface film on exposure to ambient atmosphere.     

Self-assembly of a hydrophobic groove

Heptakis(2,6-di-O-methyl)-β-cyclodextrin interacts with 5,15-diphenylporphine to produce a 2:1 complex in dimethyl sulfoxide. This complex possesses a hydrophobic groove that circumscribes the metal binding site of the porphyrin moiety.     

Synthesis and structural characterization of acetatobis(triphenylphosphine)dicarbonylmanganese(I), (CH3CO2)Mn(CO)2[P(C6H5)3]2: An organometallic complex containing a chelating acetate ligand

The accidental but intriguing synthesis of acetatobis(triphenylphosphine)dicarbonylmanganese(I), (CH₃CO₂)Mn(CO)₂[P(C₆H₅)₃]₂, has been accomplished by the reaction of NaMn(CO)₅ with (CH₃)₃SiCl followed by the addition of triphenylphosphine and acetic acid. A three-dimensional single-crystal X-ray diffraction analysis has shown an octahedral-like molecule containing a symmetrically oxygen-chelating acetate group, the first such group to be reported in a metal carbonyl complex. The two triphenylphosphine ligands occupy mutually trans positions with the two carbonyl ligands possessing the remaining cis sites in the octahedral complex. The compound crystallizes with four molecules in a monoclinic unit cell of space group symmetry $\text{P}\text{2}{}_1\text{c}$ and of dimensions a = 17.744(2) Å, b = 9.692(1) Å, c = 20.004(2) Å, and β = 106.195(4)°. The relatively long MnO(acetate) bond lengths [2.066(6) and 2.069(7) Å] and the relatively short MnCO bond lengths [1.701(12) and 1.760(13) Å] and the relatively short MnP(C₆H₅)₃ bond lengths [2.260(3) and 2.275(3) Å], compared to the corresponding MnCO and MnP(C₆H₅)₃ bond lengths in other manganese carbonyl triphenylphosphine complexes, are rationalized on the basis that the acetate ligand in this molecule functions primarily as a σ-donor.     

Intradiffusion coefficients in perchloric acid solutions: Water at 5°C; water and perchlorate ion at 25°C

Intradiffusion coefficients for tritiated water (³HHO) and perchlorate ion (³⁶ClO ₄ ^- ) were measured in perchloric acid solutions. At 5°C the diffusion coefficient measured for the tritiated species increases to a maximum near 1.3 mol-dm^–3. The data at 25°C have been used to calculate distinct diffusion coefficients, D _ij ^d . As a precursor for those calculations, new estimates were made of the Onsager phenomenological coefficients, l _ij . The l _ij and D _ij ^d are similar to the respective coefficients in hydrochloric acid solutions.     

ESR STUDY OF ORIENTED TRIPLET MOLECULES GENERATED BY EXCITATION WITH POLARIZED LIGHT

Abstract— The lowest-lying triplet states of a variety of aromatic molecules and complexes have been generated by the irradiation of these compounds in solvent glasses with plane-polarized light. Measurements of the allowed (Δ M=± 1) ESR transitions clearly demonstrate that the triplets so formed are oriented with respect to the external magnetic field. By this method the triplet zero-field splitting parameters, D and E , can be evaluated simply and reliably. Intramolecular energy transfer is postulated to explain the triplet spectra of Zn( o -phen)₂(NO₃)₂ and Zn( o -phen)₃(NO₃)₂. It was observed that in triplet-triplet energy transfer from benzophenone to naphthalene there is no apparent orientation requirement between the donor and acceptor molecules. Further areas of significance and application of this technique are suggested.