Bis(μ6‐cis‐2,4,6,8,10,12,14,16‐octa­methyl­cyclo­octa­siloxane‐2,4,6,8,10,12,14,16‐octolato)octa­kis[(dimethyl­formamide)copper(II)] dimethyl­formamide solvate enclosing a pyrazine mol­ecule

The title compound, [Cu₈(C₈H₂₄O₂Si)₂(C₃H₇NO)₈]·C₄H₄N₂·C₃H₇NO, features a sandwich‐like cage enclosing a pyrazine mol­ecule, both situated on a centre of inversion. In addition, the crystal structure contains one dimethyl­formamide mol­ecule which is disordered over a centre of inversion. The copper layer, containing eight atoms, is located between two siloxanolate fragments. The whole structure of Cu atoms and siloxanolate rings is distorted by the pyrazine mol­ecule, leading to an oval form. As a result, the angles between the Cu atoms differ at the copper layer. The difference in the angles could lead to some deviations in the Cu–Cu exchange inter­actions within the copper ring, which is of inter­est for mol­ecular magnetism.     

Investigation of preheating of laser thermonuclear targets

The preheating level of the thermonuclear fuel and of the gas-compressing shell is the main criterion of the target-compression efficiency in experiments on laserdriven thermonuclear fusion. This paper contains the result of investigations of electronic, radiative, and impact preheating in experiments on compression and heating of hlgh-aspect shell targets in the Del'fin-l laser-derived thermonuclear facility. A procedure, based on analysis of the epithermal emission of the plasma, is considered for measuring the target preheating by fast electrons. The radiative and impact preheating of compressing shells in DD gas are estimated. The results of the investigation demonstrate the high degree of adiabaticity of the compression of the thermonuclear fuel in experiments with the Del'fin-l facility.Nuclear Plasma Laboratory of the Lebedev Physics Institute. Translated from Preprint No. 3, Lebedev Physics Institute, Academy of Sciences of the USSR, Moscow, 1990.     

Study of the reactione + e −→K + K − in the energy range1350 \leqq \sqrt s \leqq 2400 MeV

Thee ⁺ e ^?→K ⁺ K ^? cross section has been measured from about 750 events in the energy interval \(1350 \leqq \sqrt s \leqq 2400 MeV\) with the DM2 detector at DCI. TheK ^± form factor |F _F ^±| cannot be explained by the ρ, ω, ? and ρ′(1600). An additional resonant amplitude at 1650 MeV has to be added as suggested by a previous experiment.     

Structural and mechanistic look at the orthoplatination of aryl oximes by dichlorobis(sulfoxide or sulfide)platinum(II) complexes

Structural and mechanistic aspects of orthoplatination of acetophenone and benzaldehyde oximes by the platinum(II) sulfoxide and sulfide complexes [PtCl(2)L(2)] (2, L = SOMe(2) (a), rac-SOMePh (b), R-SOMe(C(6)H(4)Me-4) (c), and SMe(2) (d)) to afford the corresponding platinacycles cis-(C,S)-[Pt(II)(C(6)H(3)-2-CR'=NOH-5-R)Cl(L)] (3, R, R' = H, Me) have been investigated. The reaction of acetophenone oxime with sulfoxide complex 2a in methanol solvent occurs noticeably faster than with sulfide complex 2d due to the fact that the sulfoxide is a much better platinum(II) leaving ligand than the sulfide. Evidence is presented that the orthoplatination is a multistep process. The formation of unreactive dichlorobis(N-oxime)platinum(II) cations accounts for the rate retardation by excess acetophenone oxime and suggests the importance of pseudocoordinatively unsaturated species for the C-H bond activation by Pt(II). A comparative X-ray structural study of dimethyl sulfoxide platinacycle 3b (R = R' = Me) and its sulfide analogue 3e (R = H, R' = Me), as well as of SOMePh complex 3c (R = H, R' = Me), indicated that they are structurally similar and a sulfur ligand is coordinated in the cis position with respect to the sigma-bound phenyl carbon. The differences concern the Pt-S bond distance, which is notably longer in the sulfide complex 3e (2.2677(11) A) as compared to that in sulfoxide complexes 3b (2.201(2)-2.215(2) A) and 3c (2.2196(12) A). Whereas the metal plane is practically a plane of symmetry in 3b due to the H-bonding between the sulfoxide oxygen and the proton at carbon ortho to the Pt-C bond, an S-bonded methyl of SOMePh and SMe(2) is basically in the platinum(II) plane in complexes 3c and 3e, respectively. There are intra- and intermolecular hydrogen bond networks in complex 3b. An interesting structural feature of complex 3c is that the two independent molecules in the asymmetric unit of the crystal reveal an extremely short Pt-Pt contact of 3.337 A.     

Di- and trinuclear Zn2+ complexes of calix[4]arene based ligands as catalysts of acyl and phosphoryl transfer reactions

The calix[4]arene scaffold, blocked in the cone conformation by proper alkylation of the lower rim hydroxyls, was used as a convenient molecular platform for the design of bi- and trimetallic Zn2+ catalysts. The catalytic activity of the Zn2+ complexes of calix[4]arenes decorated at the 1,2-, 1,3-, and 1,2,3-positions of the upper rim with 2,6-bis[(dimethylamino)methyl]pyridine units were investigated in the cleavage of ester 6 and of the RNA model compound HPNP. High rate enhancements, up to 4 orders of magnitude, were observed in a number of catalyst-substrate combinations. Interestingly the order of catalytic efficiency among regioisomeric dinuclear complexes in the cleavage of ester 6 is 1,2-vicinal > 1,3-distal, but it is reversed in the reaction of HPNP. The higher efficiency of trinuclear compared to dinuclear complexes provides an indication of the cooperation of three Zn2+ ions in the catalytic mechanism.     

Adsorption thin-layer chromatography and viscometry of polystyrenes in solvent mixtures

The effect of the thermodynamic quality of solvent mixtures on the adsorption behavior of macromolecules under dynamic conditions was investigated. The chromatographic behavior of polystyrenes (PSs) in various mixed eluents was studied under conditions of adsorption and size-exclusion thin-layer chromatography as well as at the exclusion-adsorption transition point with silica gel KSKG adsorbent. The thermodynamic quality of the solvent mixtures used in the chromatographic experiments was determined viscometrically. The dependences of the intrinsic viscosity of PSs on solvent composition for solvent-non-solvent, two solvents, and theta-solvent-solvent mixtures were obtained. A correlation was found between Snyder's polarity indices for the solvent mixtures used in polymer chromatography under "critical conditions" and the intrinsic viscosity values of PSs in the same mixtures.     

Assembly of a supramolecular capsule on a molecular printboard

A molecular capsule based on ionic interactions between two oppositely charged calix[4]arenes, 1 and 2, was assembled both in solution and on a surface. In solution, the formation of the equimolar assembly 1.2 was studied by (1)H NMR, ESI-MS, and isothermal titration calorimetry, giving an association constant (K(a)) of 7.5 x 10(5) M(-1). A beta-cyclodextrin self-assembled monolayer (beta-CD SAM) on gold was used as a molecular printboard to anchor the tetraguanidinium calix[4]arene (2). The binding of tetrasulfonate calix[4]arene 1 was monitored by surface plasmon resonance spectroscopy. Rinsing of the surface with a high ionic strength aqueous solution allows the removal of the tetrasulfonate calix[4]arene (1), while by rinsing with 2-propanol it is possible to achieve the complete desorption of the tetraguanidinium calix[4]arene (2) from the beta-CD SAM. The K(a) for the capsule formation on a surface is 3.5 x 10(6) M(-1), thus comparing well with the K(a) determined in solution.     

Sorption equilibrium of methanol on new composite sorbents “CaCl<Subscript>2</Subscript>/silica gel”

This paper presents experimental data on methanol sorption on new composite sorbents which consist of mesoporous silica gels and calcium chloride confined to their pores. Sorption isobars and XRD analysis showed the formation of a solid crystalline solvate CaCl₂⋅2MeOH at low methanol uptake, while at higher uptake the formation of the CaCl₂–methanol solution occurred. The solution confined to the silica pores showed the sorption properties similar to those of the CaCl₂–methanol bulk solution. Calorimetric and isosteric analyses showed that the heat of methanol sorption depends on the methanol uptake, ranging from 38±2 kJ/mol for the solution to 81±4 kJ/mol for the solid crystalline phase CaCl₂⋅2MeOH. The above mentioned characterizations allowed the evaluation of the methanol sorption and the energy storage capacities, clearly showing that the optimal applications of these new composite sorbents are the methanol removal from gaseous mixtures, heat storage and sorption cooling driven by low temperature heat.