Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Crosslinked poly(ethylene oxide) containing siloxanes fabricated through thiol‐ene photochemistry

Homogenous amphiphilic crosslinked polymer films comprising of poly(ethylene oxide) and polysiloxane were synthesized utilizing thiol‐ene “ click ” photochemistry. A systematic variation in polymer composition was Carried out to obtain high quality films with varied amount of siloxane and poly(ethylene oxide). These films showed improved gas separation performance with high gas permeabilities with good CO₂/N₂ selectivity. Furthermore, the resulting films were also tested for its biocompatibility, as a carrier media which allow human adult mesenchymal stem cells to retain their capacity for osteoblastic differentiation after transplantation. The obtained crosslinked films were characterized using differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, FTIR, Raman‐IR , and small angle X‐ray scattering. The synthesis ease and commercial availability of the starting materials suggests that these new crosslinked polymer networks could find applications in wide range of applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1548–1557     

An organometallic RhIII complex with a distorted octahedral structure: (acetonitrile‐κN)dimethyl(1,4,7‐trimethyl‐1,4,7‐triazacyclononane‐κ3N,N′,N′′)rhodium(III) tetraphenylborate

In the title compound, [Rh(CH₃)₂(C₂H₃N)(C₉H₂₁N₃)](C₂₄H₂₀B), the geometry around the Rh^III centre is distorted octahedral, with elongated Rh—N bonds trans to the metal‐bonded methyl groups. The metal‐containing cations are located in channels formed by an anionic supramolecular mesh, in which aromatic π–π interactions between anionic [B(Ph)₄]^? units play a major role.     

Propagation estimates forN-body Schroedinger operators

We prove propagation estimates (of strong type) for long-rangeN-body Hamiltonians. Emphasis is on phase-space analysis in the free channel region.     

Radiative lifetimes in Ce I and Ce II

New radiative lifetime measurements based on time-resolved laser-induced fluorescence techniques are reported for 18 even-parity levels belonging to the 4f5d^26p and 4f ²5d ² configurations of Ce I and 6 even-parity levels belonging to the 5d^26s, 4f5d6p, and 4f6s6p configurations of Ce II. Free neutral and singly ionized cerium atoms were produced by laser ablation. The Ce I and Ce II levels range in energy from 26 545 to 29 102 cm^-1, and 42 573 to 48 152 cm^-1, respectively. Received 25 September 2002 Published online 4 March 2003     

Temperature coefficient of NH chemical shifts of thioamides and amides in relation to structure

NH chemical shift temperature coefficients have been measured in a large series of N-substituted-3-piperidinethiopropionamides in which the NN distances are short but of varied length, as well as in a couple of the corresponding amides and in some simpler amides and thioamides. Geometries are calculated by means of ab initio DFT methods. The N-substituted-3-piperidinethiopropionamides show in most cases strong intramolecular N–HN hydrogen bonds according to IR spectra and ab initio calculations. For compounds with rather short NN distances the S=C–N–H moiety is non-planar. Dihedral angles as small as 160° are found. The NH chemical shift coefficients measured in non-polar solvents in all the N-substituted-3-piperidinethiopropionamides are more negative (−8 to −17 ppb/K) than in non-hydrogen bonded thioamides. For the latter in non-polar solvents like CDCl₃ and toluene the temperature coefficients are as small as −1 to −4 ppb/K. The large negative effects can be related not only to the non-planarity of the thioamide group in a way that the more pronounced the non-planarity the more negative the temperature coefficients, but also to strong hydrogen bonding and the fact that the acceptor is a nitrogen. For similar amides with non-planar amide groups and nitrogen acceptor large negative temperature coefficients are likewise seen. In polar solvents like DMF the effects in simple thioamides are uniform and close to −6 ppb/K, whereas in the more complex compound like 4p(t) the temperature coefficient is close to 0. An essential feature of measuring temperature coefficients of compounds without strong intramolecular hydrogen bonds in non-polar solvents and at low temperatures is to keep the concentration low enough to avoid dimerisation.     

Identifying assembly maps in K- and L-theory

In this paper we prove the equivalence of various algebraically or geometrically defined assembly maps used in formulating the main conjectures in K- and L-theory, and C^*-theory.Partially supported by NSERC grant A4000 and NSF grant DMS 9104026. The authors also wish to thank the SFB für Geometrie und Analysis, Münster, and the Max Planck Institut für Mathematik, Bonn, for their hospitality and support.Received: 7 May 2001     

From monomeric to polymeric ferroelectric liquid crystals A comparative study of ferroelectric properties

Two new ferroelectric oligosiloxanes, a cyclic tetramer and a twin, have been synthesized. By a comparative study with their corresponding monomer and side chain polysiloxanes, the influence of oligo- and polymerization on the liquid crystalline and ferroelectric properties have been investigated. Polymerization leads to a stabilization of LC phases through increase of the clearing temperatures and suppression of crystallization. Oligomerization also leads to mesophase broadening, but, due to the low degree of polymerization, the effect is inferior to the linear polysiloxanes. The low viscosity of the oligosiloxanes ensures response times in the microsecond region, thus being comparable with their monomer and conventional LMWFLCs. It is found that polymerization increases the spontaneous polarization P_s. This is attributed to the density increase after polymerization, enhancing the inter-mesogenic interactions. The collective and local dynamics of the OFLCs are influenced differently with respect to their molecular structures. Each oligomer is already a good model for its corresponding polymer concerning the soft mode dynamics. For the local β-relaxation a similar temperature dependence of the relaxation times τ for the cyclic tetramer and for the side chain polysiloxanes is observed. The long axial rotation of the twin, having a very efficient decoupling, is significantly faster, thus resembling the monomer.