13C nuclear magnetic resonance studies of cellulose acetate

¹³C-NMR spectra of ring carbons and O-acetyl carbonyl carbons of cellulose acetate (CA) in dimethyl sulfoxide-d₆ were analyzed. The CA samples with the degree of substitution (DS) ranging from 0.84 and 1.91 were prepared by homogeneous acetylation of cellulose with acetic anhydride in a 10% LiCl/dimethyl acetamide solvent. It was found that the use of these low DS samples permitted easier assignments not only of the ring carbon but also of the O-acetyl carbonyl carbon signals. The assignments were confirmed by comparing with the ¹H-NMR spectra of the samples obtained by complete acetylation of the corresponding CA samples with acetyl-d₃ chloride. Two methods for determining the distribution of O-acetyl groups of CA, i.e., the relative DS at the three different types of hydroxyl groups, were developed. One is based on the measurements of the relative intensities of the signals for the ring carbons and the other is based on the measurements of the relative intensities of the signals for the O-acetyl carbonyl carbons.     

Design and synthesis of highly sensitive and selective fluorescein-derived magnesium fluorescent probes and application to intracellular 3D Mg2+ imaging

The role of intracellular magnesium ions is of high interest in the fields of pharmacology and cellular biology. To accomplish the dynamic and three-dimensional imaging of intracellular Mg2+, there is a strong desire for the development of optimized Mg2+ fluorescent probes. In this paper we describe the design, synthesis, and cellular application of the three novel Mg2+ fluorescent probes KMG-101, -103, and -104. The compounds of this series feature a charged beta-diketone as a binding site specific for Mg2+ and a fluorescein residue as the fluorophore that can be excited with an Ar+ laser such as is widely used in confocal scanning microscopy. This molecular design leads to an intensive off-on-type fluorescent response toward Mg2+ ions. The two fluorescent probes KMG-103 and -104 showed suitable dissociation constants (Kd,Mg2+ = 2 mM) and nearly a 10-fold fluorescence enhancement over the intracellular magnesium ion concentration range (0.1-6 mM), allowing high-contrast, sensitive, and selective Mg2+ measurements. For intracellular applications, the membrane-permeable probe KMG-104AM was synthesized and successfully incorporated into PC12 cells. Upon application of the mitochondria uncoupler FCCP to the probe-incorporated cells, the resulting increase in the free magnesium ion concentration could be followed over time. By using a confocal microscope, the intracellular 3D magnesium ion concentration distributions were satisfactorily observed.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.     

Best possibility of the Furuta inequality

Let , and . Furuta (1987) proved that if bounded linear operators on a Hilbert space satisfy , then . In this paper, we prove that the range and is best possible with respect to the Furuta inequality, that is, if or , then there exist which satisfy but .

     

CHOICE OF COATINGS FOR THE OPTICAL ELEMENTS IN THE IRRADIATION SYSTEM OF VACUUM-ULTRAVIOLET RADIATION ABOVE 50 nm

The spectral throughput of a vacuum-ultraviolet irradiation system at the SOR-RING facility was examined with various combinations of aluminum-and gold-coated optical elements in a 2.2-m modified Wadsworth monochromator. We found that the optimum was a combination of an aluminum-coated collimating mirror, concave grating, and plane deflecting mirror, and a combination of a gold-coated collimating mirror, concave grating and an aluminum-coated plane deflecting mirror in the wavelength regions 190-110 nm and 110-50 nm, respectively.     

QUATERNARY STRUCTURE OF PEA PHYTOCHROME I DIMER STUDIED WITH SMALL-ANGLE X-RAY SCATTERING and ROTARY-SHADOWING ELECTRON MICROSCOPY

Abstract— The quaternary structure of pea phytochrome type I (PI) dimer in the red-light-absorbing form was studied by small-angle X-ray scattering (SAXS) technique and rotary-shadowing electron microscopy. Structural parameters for PI 114 kDa chromopeptide dimer and its tryptically digested N-terminal 59 kDa chromopeptide monomer, such as average electron density, molecular volume and the second moment of electron density distribution, were determined in terms of SAXS using the contrast variation method. Furthermore, by means of model simulation for the scattering profiles of the chromopeptides, most plausible structural models for both peptides were constructed. The distance between the chromophoric domains was estimated to be about 70 A in the resultant model for 114 kDa chromopeptide dimer. Furthermore, the model was consistent with the electron-micrographic images of both the intact PI dimer and the PI 114 kDa chromopeptide dimer, so that the N-terminal 7 kDa fragment did not significantly contribute the low-resolution images of the dimer.     

An unusual twist conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol

The ring conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol was in a twist form both in solid state and in solution. This is the first observation of a stable twist conformer induced by the introduction of bulky silyl protecting groups.